AL Rb25 Swap parts: Mounts, Converted Wiring, Transmission, Downpipe, Turbo Wheels ,10w7 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

IronMonkey · 10-19-2009, 11:18 PM

Rb25 Swap parts: Mounts, Converted Wiring, Transmission, Downpipe, Turbo Wheels ,10w7
Hey guys, the plan on swapping the rb25det into my rb20 convertible never went through, I sold the car. So I have lots of parts to do this swap the right way! Items are located in Auburn Al. PM or email me for more info. Thanks

*Skyline R32 front cross member. This is much beefier than the stock front cross member. This should be use with R32 mounts as well so you can use Rb20det transmission and your factor driveshaft! Can be use with eithr Rb20 or Rb25 motor. $135

*Rb20det 5 Spd transmission with transmission cross member and mount! Use this with the front skyline cross member to be able to use your factory driveshaft. Comes with shifter as well. Can include clutch/pressure plae (50 miles) for extra. Works with both Rb20/rb25 motor. $295

*Custom rb20/25 dumppipe and downpipe to clear steering issues. For use with skyline cross member. Asking $95

*Rb25det Series 1 wiring harness already converted by Mckinney Motorsports for S13. They are the old school skyline swap guys. Bought it, but never had it install in my car. Looks really clean and loomed. I imagine you can use this on the S14 if you swithch out the lower engine harness. $OLD and shipped.

* New Precision T3/T04E turbo. .60 a/r compressor, .63 a.r turbine. 60 trim. Comes with semi polished compressor. $495

*18" JDM Napre Medusa wheels. 18x8 with 33 offsets all around. Great wheels! Looks nice, lightweight, and clear all my coilovers and even brembo brakes (barely lol). Great track wheels. Rear tires have been recently changed for my track day! Asking $350 They are for 4 and 5 lugs!

*JL Audio 10w7 in box with pimping amp. Has a slight tear in the middle, but doesnt affect performance. Asking $275

Also has a bunch of rb25 stock injectors, ecu, and wiring harness as well...

IronMonkey · 10-21-2009, 09:11 PM

still for sale....

sleeper108 · 10-21-2009, 09:47 PM

Ok, Ive been trying to find this answer, but no luck.

wil the series 1 s13/rb25 wiring harness work with a series 2?

I am interested in all the mounts, and wiring harness.

RHDAmerica · 10-21-2009, 10:03 PM

the only difference between the series 1 and 2 is the coilpacks, series 1 requires an igniter chip, and series 2 has the igniter in its coilpacks. Also the ecu's are different.

To answer your question no it won't work unless you have someone rewire your harness for whatever series you are running.

sleeper108 · 10-21-2009, 10:39 PM

Quote:

Originally Posted by R34240sx

the only difference between the series 1 and 2 is the coilpacks, series 1 requires an igniter chip, and series 2 has the igniter in its coilpacks. Also the ecu's are different.

To answer your question no it won't work unless you have someone rewire your harness for whatever series you are running.

THANKYOU!!!! i cant count how many threads just replied "search it" but i searched for roughly an hour with no information.

sorry, im gonna pass on the stuff, but free bump for you... hopefully i will be able to do something by this winter =/

IronMonkey · 10-22-2009, 12:04 AM

or you can convert it to series one, i have ignitor and coilpacks that you can buy as well.... i kinda did the opposite, so i have series one stuff leftover....

ecus are pretty interchangable...

IronMonkey · 11-01-2009, 10:05 PM

make some reasonable offers guys...

JDM_Drifter · 11-29-2009, 02:06 PM

i will make you an offer on the tranny and the harness once i get rid of my kat setup

lanerjo · 12-03-2009, 05:55 PM

I am looking for a R32 crossmember if it is still available

Leftlane · 02-28-2010, 11:33 PM

still have the tranny? i have cash in hand!
where in GA are you?

EnemyS15 · 03-01-2010, 07:34 AM

sell tranny crossmember??? pm price shipped to 33612

n8RPS13 · 03-01-2010, 07:49 PM

The W7 is torn or the carpet on the box please specify...and we might have a deal.

10-19-2009, 11:18 PM	#1
IronMonkey Zilvia Junkie Join Date: Jul 2006 Location: Ga Posts: 532 Trader Rating: (10) Feedback Score: 10 reviews	Rb25 Swap parts: Mounts, Converted Wiring, Transmission, Downpipe, Turbo Wheels ,10w7 Rb25 Swap parts: Mounts, Converted Wiring, Transmission, Downpipe, Turbo Wheels ,10w7 Hey guys, the plan on swapping the rb25det into my rb20 convertible never went through, I sold the car. So I have lots of parts to do this swap the right way! Items are located in Auburn Al. PM or email me for more info. Thanks Skyline R32 front cross member. This is much beefier than the stock front cross member. This should be use with R32 mounts as well so you can use Rb20det transmission and your factor driveshaft! Can be use with eithr Rb20 or Rb25 motor. $135 Rb20det 5 Spd transmission with transmission cross member and mount! Use this with the front skyline cross member to be able to use your factory driveshaft. Comes with shifter as well. Can include clutch/pressure plae (50 miles) for extra. Works with both Rb20/rb25 motor. $295 Custom rb20/25 dumppipe and downpipe to clear steering issues. For use with skyline cross member. Asking $95 Rb25det Series 1 wiring harness already converted by Mckinney Motorsports for S13. They are the old school skyline swap guys. Bought it, but never had it install in my car. Looks really clean and loomed. I imagine you can use this on the S14 if you swithch out the lower engine harness. $OLD and shipped. * New Precision T3/T04E turbo. .60 a/r compressor, .63 a.r turbine. 60 trim. Comes with semi polished compressor. $495 18" JDM Napre Medusa wheels. 18x8 with 33 offsets all around. Great wheels! Looks nice, lightweight, and clear all my coilovers and even brembo brakes (barely lol). Great track wheels. Rear tires have been recently changed for my track day! Asking $350 They are for 4 and 5 lugs! JL Audio 10w7 in box with pimping amp. Has a slight tear in the middle, but doesnt affect performance. Asking $275 Also has a bunch of rb25 stock injectors, ecu, and wiring harness as well... __________________ Last edited by IronMonkey; 11-30-2009 at 12:53 PM..

10-21-2009, 09:11 PM	#2
IronMonkey Zilvia Junkie Join Date: Jul 2006 Location: Ga Posts: 532 Trader Rating: (10) Feedback Score: 10 reviews	still for sale.... __________________

10-22-2009, 12:04 AM	#6
IronMonkey Zilvia Junkie Join Date: Jul 2006 Location: Ga Posts: 532 Trader Rating: (10) Feedback Score: 10 reviews	or you can convert it to series one, i have ignitor and coilpacks that you can buy as well.... i kinda did the opposite, so i have series one stuff leftover.... ecus are pretty interchangable... __________________

11-01-2009, 10:05 PM	#7
IronMonkey Zilvia Junkie Join Date: Jul 2006 Location: Ga Posts: 532 Trader Rating: (10) Feedback Score: 10 reviews	make some reasonable offers guys... __________________

10-21-2009, 09:47 PM	#3
sleeper108 Zilvia Junkie Join Date: Dec 2008 Location: Albuquerque, NM Age: 35 Posts: 511 Trader Rating: (7) Feedback Score: 7 reviews	Ok, Ive been trying to find this answer, but no luck. wil the series 1 s13/rb25 wiring harness work with a series 2? I am interested in all the mounts, and wiring harness.

10-21-2009, 10:03 PM	#4
RHDAmerica Banned from the Marketplace Join Date: Mar 2007 Location: RHDAmerica Posts: 924 Trader Rating: (13) Feedback Score: 13 reviews	the only difference between the series 1 and 2 is the coilpacks, series 1 requires an igniter chip, and series 2 has the igniter in its coilpacks. Also the ecu's are different. To answer your question no it won't work unless you have someone rewire your harness for whatever series you are running.

11-29-2009, 02:06 PM	#8
JDM_Drifter Join Date: Jan 2007 Location: in my s13 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	i will make you an offer on the tranny and the harness once i get rid of my kat setup

12-03-2009, 05:55 PM	#9
lanerjo Join Date: Jun 2008 Location: Overland Park Age: 46 Posts: 16 Trader Rating: (1) Feedback Score: 1 reviews	I am looking for a R32 crossmember if it is still available

02-28-2010, 11:33 PM	#10
Leftlane Join Date: Aug 2008 Location: Nashville, TN Age: 40 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	still have the tranny? i have cash in hand! where in GA are you?

03-01-2010, 07:34 AM	#11
EnemyS15 Nissanaholic! Join Date: Jul 2006 Location: Tampa, Florida Posts: 1,677 Trader Rating: (14) Feedback Score: 14 reviews	sell tranny crossmember??? pm price shipped to 33612

03-01-2010, 07:49 PM	#12
n8RPS13 Zilvia FREAK! Join Date: Sep 2009 Location: New Smyrna Beach Posts: 1,296 Trader Rating: (22) Feedback Score: 22 reviews	The W7 is torn or the carpet on the box please specify...and we might have a deal.