s14 window thing - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

domo dorigato · 06-01-2010, 10:23 PM

how do you get that thing off? (the green highlighted unit) do i have to take everything it's attached to first? I just need to replace that one part to get my driver side window working again.

I tried getting the screws off from the back but i think i messed up one of them..

is there an easier way to get that piece off? suggestions? thanks!

chituntang · 06-01-2010, 10:55 PM

The circle part right below (7 o'clock) is part of the window motor too. And yes, you will have to remove the glass and the track to remove the motor. Did it, hated it.

miravete · 06-02-2010, 01:06 AM

yeap. its a bitch. youre gonna have to remove the whole thing. window and rail

JDM Sil4ty · 06-02-2010, 06:17 AM

i got to it, w/o removing my window. i unscrewed the 'door glass sub-channel adjustment' and iirc, 1 or 2 other screws so the motor would be movable. after that's accomplished, i was able to unbolt the 4 screws that were visible (on the window motor). and vuala! same procedure but in reverse.

key factor: im asian, about 5'5. small hands were definitely needed.

and if u do it this way.. make sure you have control of the window glass.

5pecialist · 06-02-2010, 07:20 AM

It's a bitch. I had to remove & replace the entire door innards, in a parking lot, after a jerk sold me his door off NICO (and failed to mention that he stripped it clean).

Let me know if you figure out how to properly align the tracks again. My window is now loose & makes loud noises when I roll it up.

06-01-2010, 10:23 PM	#1
domo dorigato Leaky Injector Join Date: Nov 2004 Location: YAY AREA Posts: 102 Trader Rating: (1) Feedback Score: 1 reviews	s14 window thing how do you get that thing off? (the green highlighted unit) do i have to take everything it's attached to first? I just need to replace that one part to get my driver side window working again. I tried getting the screws off from the back but i think i messed up one of them.. is there an easier way to get that piece off? suggestions? thanks!

06-02-2010, 01:06 AM	#3
miravete Nissanaholic! Join Date: Dec 2007 Location: tecate Age: 41 Posts: 2,127 Trader Rating: (44) Feedback Score: 44 reviews	yeap. its a bitch. youre gonna have to remove the whole thing. window and rail __________________ taking corners just as good as a drunken rhino..

06-02-2010, 06:17 AM	#4
JDM Sil4ty Zilvia Addict Join Date: Sep 2009 Location: City of Trees; Cali Posts: 722 Trader Rating: (11) Feedback Score: 11 reviews	i got to it, w/o removing my window. i unscrewed the 'door glass sub-channel adjustment' and iirc, 1 or 2 other screws so the motor would be movable. after that's accomplished, i was able to unbolt the 4 screws that were visible (on the window motor). and vuala! same procedure but in reverse. key factor: im asian, about 5'5. small hands were definitely needed. and if u do it this way.. make sure you have control of the window glass. __________________ alpha kenny body.

06-02-2010, 07:20 AM	#5
5pecialist Zilvia Junkie Join Date: Apr 2008 Location: (at rock bottom) Posts: 442 Trader Rating: (1) Feedback Score: 1 reviews	It's a bitch. I had to remove & replace the entire door innards, in a parking lot, after a jerk sold me his door off NICO (and failed to mention that he stripped it clean). Let me know if you figure out how to properly align the tracks again. My window is now loose & makes loud noises when I roll it up. Last edited by 5pecialist; 06-02-2010 at 08:54 AM..

06-01-2010, 10:55 PM	#2
chituntang Zilvia Junkie Join Date: Sep 2005 Location: ATL Age: 38 Posts: 505 Trader Rating: (13) Feedback Score: 13 reviews	The circle part right below (7 o'clock) is part of the window motor too. And yes, you will have to remove the glass and the track to remove the motor. Did it, hated it.