NY 2nd gen camaro 5.7, reverse man th350, posi, roll cage $2700 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

shinrekka · 08-13-2010, 01:17 PM

ITEM: 1981 Camaro
PRICE: $2700
SHIPPING: no can do, sorry
DESCRIPTION:
I finally got my hands on this car a few months ago, years after I originally tried to buy it. My neighbor owned it and then it was sold to another neighbor, who later sold it to me. This car has been off the road since 2004. It has become a long time project since then. I ran the numbers on the motor and its a 1969 350 block with good 305 heads (high compression). The transmission is a rebuilt turbo 350 w/ manual valve body and the rear is a 10bolt posi with 3.73gears. Take the car for a spin, it runs excellent. Over the past 6 years the car has constintly been driven around the same neighborhood by myself and the previous 2 owners. It starts right up like a brand new car. The motor sounds very healthy and by the sound of the idle, im sure it has a mild cam. Here is a list of what was done or changed. Even if something was changed a couple years ago it still has almost no miles on it. Keep in mind it is a project car and it needs some finishing touches. First of all, it has a pin hole in a brake line. The headlights and window trim need to be put on, i didnt because I would assume the next owner is going to get the car painted and would have to remove them all again. The cowl hood either needs to be drilled for hood pins or you can reattach the factory hardware to it. The hood was 500$, i really didnt want to drill through it. The body of the car is in great shape, the trunk is clean and the underside of the car has minimal surface rust. Obviously the car needs a paint job.

-1969 350
-weiand stealth intake manifold
-edlebrock 650cfm carb
-big block front springs
-Moroso Oil pan
-New Battery
-turbo350 trans with reverse manual valve body
-MSD ignition box, MSD distributer, MSD coil, MSD wires
-Hedman headers, Flowmaster true dual exhaust
-24254345 casting heads (305 High compression)
-b+m slap shifter
-new transmission cooler
-Rebuilt Posi
-3.73 gears
-new radiater
-new alternater
-4" harwood cowl hood
-Fresh tires
-8 point Roll Cage
-new windsheild
-new body mount bushings

VIN: 1g1ap87k5bl180401
MILEAGE: 180k on body CORRECTION 118K
TRANSMISSION: turbo 350 w/reverse manual valvebody
DOORS: 2
COLOR: flat black
RUNNING/NOT RUNNING: running
CONDITION: no rust not rot, it needs paint

CONTACT INFORMATION:
NAME: Ryan O'Hara
LOCATION: smithtown ny
EMAIL: [email protected]
AIM: no aim sorry
PAYMENT OPTIONS: Cash

08-13-2010, 01:17 PM	#1
shinrekka Zilvia Member Join Date: Oct 2004 Location: Long Island Posts: 251 Trader Rating: (0) Feedback Score: 0 reviews	2nd gen camaro 5.7, reverse man th350, posi, roll cage $2700 ITEM: 1981 Camaro PRICE: $2700 SHIPPING: no can do, sorry DESCRIPTION: I finally got my hands on this car a few months ago, years after I originally tried to buy it. My neighbor owned it and then it was sold to another neighbor, who later sold it to me. This car has been off the road since 2004. It has become a long time project since then. I ran the numbers on the motor and its a 1969 350 block with good 305 heads (high compression). The transmission is a rebuilt turbo 350 w/ manual valve body and the rear is a 10bolt posi with 3.73gears. Take the car for a spin, it runs excellent. Over the past 6 years the car has constintly been driven around the same neighborhood by myself and the previous 2 owners. It starts right up like a brand new car. The motor sounds very healthy and by the sound of the idle, im sure it has a mild cam. Here is a list of what was done or changed. Even if something was changed a couple years ago it still has almost no miles on it. Keep in mind it is a project car and it needs some finishing touches. First of all, it has a pin hole in a brake line. The headlights and window trim need to be put on, i didnt because I would assume the next owner is going to get the car painted and would have to remove them all again. The cowl hood either needs to be drilled for hood pins or you can reattach the factory hardware to it. The hood was 500$, i really didnt want to drill through it. The body of the car is in great shape, the trunk is clean and the underside of the car has minimal surface rust. Obviously the car needs a paint job. -1969 350 -weiand stealth intake manifold -edlebrock 650cfm carb -big block front springs -Moroso Oil pan -New Battery -turbo350 trans with reverse manual valve body -MSD ignition box, MSD distributer, MSD coil, MSD wires -Hedman headers, Flowmaster true dual exhaust -24254345 casting heads (305 High compression) -b+m slap shifter -new transmission cooler -Rebuilt Posi -3.73 gears -new radiater -new alternater -4" harwood cowl hood -Fresh tires -8 point Roll Cage -new windsheild -new body mount bushings VIN: 1g1ap87k5bl180401 MILEAGE: 180k on body CORRECTION 118K TRANSMISSION: turbo 350 w/reverse manual valvebody DOORS: 2 COLOR: flat black RUNNING/NOT RUNNING: running CONDITION: no rust not rot, it needs paint CONTACT INFORMATION: NAME: Ryan O'Hara LOCATION: smithtown ny EMAIL: [email protected] AIM: no aim sorry PAYMENT OPTIONS: Cash Last edited by shinrekka; 08-26-2010 at 09:50 AM.. Reason: forgot contact info