PA Built ka swap and other random part out pieces - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

urnext · 01-03-2011, 10:57 AM

Ok guys I had this whole car posted up before but now I'm parting it out as it has to go. This is a brand new crate engine with only around 2000 miles (I have receipts for this!). The transmission has about 145,000 miles. But a brand new stage spec stage 4 clutch w/ only about 2000 miles as well. This motor wasnt ever drifted or even raced for that matter. The car was built as a show car.

The motor put down 578hp & 386 ft lbs. tq to the wheels on 110 octane and 316hp on pump gas w/ a mild tune

Engine:
578 HP / 386 FT lbs TQ
2.4L KA24DE DOHC 16V

Block bored and honed .020 over
JE 9:1:1 Forged Pistons
Eagle Rods
ARP Hardware
Supertech Valves
Supertech Bearings
Supertech Keepers
Knife Edge Crank shaft
Stage 2 ported/polished cylinder head
Cosmetic Head Gasket
Price $3000

Revhard Manifold- $400
Projectsilvia 3” downpipe- $100

Spec stage 4 clutch- $200
Spec lightened flywheel- $100

PWR Front mount Intercooler- $175

Vibrant 3" Cat-back exhaust- $200

PHAT KAT fuel rail- $150

Exterior:
Extreme Dimensions Front Bumper- $100
Extreme Dimensions Rear Bumper-$100
Extreme Dimensions Skirts-$100

Interior:
Autopower Roll cage- $300

Suspension & Wheels:
19x8.5 F 19x9.5 R Enkei RPF1 wheels- $900
225/35/19 F 255/35/19 R BFGoodrich Tires- $800

Everything is obo whatever sells out of this stuff gets my car going for this season so lets get a move on

Edwin562 · 01-03-2011, 11:01 AM

car looks fukin awesome

hopefull · 01-05-2011, 10:33 AM

Rev hard manifold shipped to 21114 and the ems

Paper_Tiger240 · 01-05-2011, 07:47 PM

Ems complete setup, injectors fuel rail, and turbo manifold

Shipped to 91763

urnext · 01-06-2011, 08:40 AM

Quote:

Originally Posted by hopefull

Rev hard manifold shipped to 21114 and the ems

Shipping is going to run $25. EMS has a pending sale but its not sold till I have cash in hand just letting you know

Quote:

Originally Posted by Paper_Tiger240

Ems complete setup, injectors fuel rail, and turbo manifold

Shipped to 91763

Shipping will be $40 read the above about the EMS. Also I'm not looking to really part the turbo setup but make me a reasonable offer and I'll consider it.

if either of you is interested in buying this stuff email me at [email protected] which is also my paypal addy
Thanks

JonathanPrem · 01-06-2011, 09:18 AM

I sent you a email to [email protected]

hopefull · 01-06-2011, 11:07 AM

Would you do 4 for the manifold

urnext · 01-06-2011, 04:01 PM

Quote:

Originally Posted by hopefull

Would you do 4 for the manifold

yea I can do that plus ship

JonathanPrem · 01-07-2011, 09:21 AM

sent you pm for the AEM.

urnext · 01-31-2011, 09:02 AM

Thread updated
I'm trying to move this stuff out of the space its taking in the shop, Make me a reasonable offer I'd really like to see this engine go to a good home.

JFIVE · 01-31-2011, 09:29 AM

Pm best price on coils shipped to 64130. Also what's condition. Ready to buy.

urnext · 02-04-2011, 06:09 AM

heres a link to the engine running
Car :: MPEG0012.mp4 video by hettingerbrd - Photobucket

Boston240 · 02-04-2011, 08:38 AM

how old and how many miles are on the coilovers? shipping to 02169?

phaiwezzie · 02-04-2011, 09:29 AM

2nd dibs on coilovers, how many miles?

phaiwezzie · 02-04-2011, 09:31 AM

sorry its not letting me pm you. also interested in the flywheel how many miles/resurfaces?

alty319 · 02-04-2011, 10:16 AM

interested in the coils and clutch as well. i emailed you.

urnext · 02-07-2011, 07:59 AM

Coils are sold guys

urnext · 02-15-2011, 07:30 AM

edited for items left, make me some offers on the rest

project-D180 · 02-15-2011, 08:20 AM

how much u want for vavle spring kit

urnext · 02-15-2011, 09:01 AM

Quote:

Originally Posted by project-D180

how much u want for vavle spring kit

3k and it comes with a built KA

bmitchell_ga · 02-15-2011, 12:01 PM

You said you bought the motor as a built crate engine. Where did you buy it from? Does it have cams? Also does it have springs? And only 316hp on pump gas? explain

urnext · 02-17-2011, 06:37 AM

HRT performance

The motor was only on 12lbs when it made 316. With the right turbo setup and a good tune this motor would easily make 400+ on pump as a daily and still be safe. I also have all the paperwork to go with the motor. Full cost when it was picked up was right at 6k with the stage 2 port and polish job.

eSThurTeen · 02-17-2011, 12:22 PM

you selling engine and turbo set up for 3 or just the engine alone?? interested

urnext · 02-18-2011, 08:05 AM

Quote:

Originally Posted by eSThurTeen

you selling engine and turbo set up for 3 or just the engine alone?? interested

Turbos gone but the manifold and tial 38mm are still there. Id sell them with the motor for $3200 or make me some sort of offer. Also I'm a dealer for Garret the turbo id rec on this motor is a 3076 I can hook you up on a new one if interested.

arj · 02-18-2011, 09:30 AM

transmission shipped to 48183 thanks!

hopefull · 03-16-2011, 03:55 PM

still have the manifold????

*racerx2k1* · 03-17-2011, 09:44 AM

Last Activity: 03-03-2011 12:13 PM

01-03-2011, 10:57 AM	#1
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	Built ka swap and other random part out pieces Ok guys I had this whole car posted up before but now I'm parting it out as it has to go. This is a brand new crate engine with only around 2000 miles (I have receipts for this!). The transmission has about 145,000 miles. But a brand new stage spec stage 4 clutch w/ only about 2000 miles as well. This motor wasnt ever drifted or even raced for that matter. The car was built as a show car. The motor put down 578hp & 386 ft lbs. tq to the wheels on 110 octane and 316hp on pump gas w/ a mild tune Engine: 578 HP / 386 FT lbs TQ 2.4L KA24DE DOHC 16V Block bored and honed .020 over JE 9:1:1 Forged Pistons Eagle Rods ARP Hardware Supertech Valves Supertech Bearings Supertech Keepers Knife Edge Crank shaft Stage 2 ported/polished cylinder head Cosmetic Head Gasket Price $3000 Revhard Manifold- $400 Projectsilvia 3” downpipe- $100 Spec stage 4 clutch- $200 Spec lightened flywheel- $100 PWR Front mount Intercooler- $175 Vibrant 3" Cat-back exhaust- $200 PHAT KAT fuel rail- $150 Exterior: Extreme Dimensions Front Bumper- $100 Extreme Dimensions Rear Bumper-$100 Extreme Dimensions Skirts-$100 Interior: Autopower Roll cage- $300 Suspension & Wheels: 19x8.5 F 19x9.5 R Enkei RPF1 wheels- $900 225/35/19 F 255/35/19 R BFGoodrich Tires- $800 Everything is obo whatever sells out of this stuff gets my car going for this season so lets get a move on Last edited by urnext; 02-15-2011 at 07:30 AM..

02-04-2011, 10:16 AM	#16
alty319 Zilvia Member Join Date: Apr 2007 Location: New Hampsha Posts: 184 Trader Rating: (1) Feedback Score: 1 reviews	interested in the coils and clutch as well. i emailed you. __________________ D2 RS Coilovers for Sale/S14 Kouki CF Hood For Sale

03-17-2011, 09:44 AM	#27
racerx2k1 460 Join Date: Jan 2004 Location: Nowhere Posts: 17,704 Trader Rating: (0) Feedback Score: 0 reviews	Last Activity: 03-03-2011 12:13 PM __________________

01-03-2011, 11:01 AM	#2
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 35 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	car looks fukin awesome

01-05-2011, 10:33 AM	#3
hopefull Leaky Injector Join Date: Feb 2009 Location: maryland Posts: 75 Trader Rating: (1) Feedback Score: 1 reviews	Rev hard manifold shipped to 21114 and the ems

01-05-2011, 07:47 PM	#4
Paper_Tiger240 Zilvia Junkie Join Date: Jul 2009 Location: Whittier, California Age: 33 Posts: 458 Trader Rating: (10) Feedback Score: 10 reviews	Ems complete setup, injectors fuel rail, and turbo manifold Shipped to 91763

01-06-2011, 09:18 AM	#6
JonathanPrem Zilvia Addict Join Date: Sep 2010 Location: Toronto Ontario Posts: 729 Trader Rating: (9) Feedback Score: 9 reviews	I sent you a email to [email protected]

01-06-2011, 11:07 AM	#7
hopefull Leaky Injector Join Date: Feb 2009 Location: maryland Posts: 75 Trader Rating: (1) Feedback Score: 1 reviews	Would you do 4 for the manifold

01-07-2011, 09:21 AM	#9
JonathanPrem Zilvia Addict Join Date: Sep 2010 Location: Toronto Ontario Posts: 729 Trader Rating: (9) Feedback Score: 9 reviews	sent you pm for the AEM.

01-31-2011, 09:02 AM	#10
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	Thread updated I'm trying to move this stuff out of the space its taking in the shop, Make me a reasonable offer I'd really like to see this engine go to a good home.

01-31-2011, 09:29 AM	#11
JFIVE Leaky Injector Join Date: Jun 2010 Location: KANSAS CITY Posts: 82 Trader Rating: (3) Feedback Score: 3 reviews	Pm best price on coils shipped to 64130. Also what's condition. Ready to buy.

02-04-2011, 06:09 AM	#12
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	heres a link to the engine running Car :: MPEG0012.mp4 video by hettingerbrd - Photobucket

02-04-2011, 08:38 AM	#13
Boston240 Join Date: Dec 2010 Location: Boston Age: 37 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	how old and how many miles are on the coilovers? shipping to 02169?

02-04-2011, 09:29 AM	#14
phaiwezzie Leaky Injector Join Date: Oct 2006 Location: IL Posts: 108 Trader Rating: (3) Feedback Score: 3 reviews	2nd dibs on coilovers, how many miles?

02-04-2011, 09:31 AM	#15
phaiwezzie Leaky Injector Join Date: Oct 2006 Location: IL Posts: 108 Trader Rating: (3) Feedback Score: 3 reviews	sorry its not letting me pm you. also interested in the flywheel how many miles/resurfaces?

02-07-2011, 07:59 AM	#17
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	Coils are sold guys

02-15-2011, 07:30 AM	#18
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	edited for items left, make me some offers on the rest

02-15-2011, 08:20 AM	#19
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	how much u want for vavle spring kit

02-15-2011, 12:01 PM	#21
bmitchell_ga Zilvia Member Join Date: Dec 2008 Location: south ga Age: 42 Posts: 159 Trader Rating: (5) Feedback Score: 5 reviews	You said you bought the motor as a built crate engine. Where did you buy it from? Does it have cams? Also does it have springs? And only 316hp on pump gas? explain

02-17-2011, 06:37 AM	#22
urnext Zilvia Member Join Date: Nov 2008 Location: PA Posts: 199 Trader Rating: (4) Feedback Score: 4 reviews	HRT performance The motor was only on 12lbs when it made 316. With the right turbo setup and a good tune this motor would easily make 400+ on pump as a daily and still be safe. I also have all the paperwork to go with the motor. Full cost when it was picked up was right at 6k with the stage 2 port and polish job.

02-17-2011, 12:22 PM	#23
eSThurTeen Leaky Injector Join Date: Jun 2010 Location: El paso Age: 34 Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	you selling engine and turbo set up for 3 or just the engine alone?? interested

02-18-2011, 09:30 AM	#25
arj Join Date: Jan 2011 Location: mi Age: 37 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	transmission shipped to 48183 thanks!

03-16-2011, 03:55 PM	#26
hopefull Leaky Injector Join Date: Feb 2009 Location: maryland Posts: 75 Trader Rating: (1) Feedback Score: 1 reviews	still have the manifold????