Can I remove these harness plugs?

[S13NismoStyle]

Hi, I am in the middle of re-sleeving and removing unneeded wires/plugs from my S13 sr20det harness.

The plugs in question are:

Boost Pressure Control Solenoid Plug

EAI AIV Control Solenoid Plug

Intake Air Sensor Plug

Tach Check Connector

#1 Coil Check Connector

#1 Coil Check Connector Resistor

Power Steering Pressure Switch Plug

Thermistor Control Amp Plug

And the small grey plug near the power plugs

I was wondering which of these plugs I could completely remove, seeing as I do not use any of them. When I remove them, can I just trace them back to the ECU Connector and De-pin them? Will any of them throw a CEL if removed?

I found this thread here and it has a picture of all the plugs in question.

http://zilvia.net/f/engine-tech/2930...ing-guide.html

(Thanks g6civcx)

But I just want to make sure before I start hacking stuff up.

Im hoping just to clean everything up. Thanks

[S13NismoStyle]

Anyone have any idea? lol

[chiboy002]

why not just try running the car with them unplugged? Thats pretty much what depinning them is, unless you completely remove it within the ecu