Hydro ebrake set up help please - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JDMStanced · 05-11-2011, 12:54 AM

Hi people,
I need help with getting a hydraulic E-brake set up on my 350z.

I already ordered the ebrake handle and bracket from CNC. Didn't order from this website. http://www.offroadwarehouse.com/prod...roductID/41837
i chose the one without master cylinder so that i can use that CNC balling handle with Wilwood master cylinder. WILWOOD SINGLE REMOTE RESERVOIR MASTER CYLINDER - P/N 260-10371 Ordered this too.
Now i need brake lines, one T fitting, and two Y fittings.
Will it be OK if i use this brake line instead of hardlines?http://www.autozone.com/autozone/acc...er=602041_0_0_ It supposedly bend easily by hand. The line will go down through the shifter area, down to the bottom of the car next to tranny, go around and connect to other lines in the passenger wheel well area.
The reason im considering this is because If i go with hardlines, i'd need to buy like couple adapters to make it longer. I need about 24 ft.
If it is OK to use this brake line that is linked above, i'd need a flaring tool. Perhaps someone on this forum has a flaring tool and a hardline bender that i can borrow..

Also, does anyone know (or have) where i can get 10mm x 10mm x 3/16" Y-fitting?

i won't reject anyone who wants to come help me for a drink

Your help will be greatly appreciated thanks

JDMStanced · 05-12-2011, 11:36 PM

bump for help.

JDMStanced · 05-13-2011, 06:06 PM

where i can get 10mm x 10mm x 3/16" Y-fitting?

E30Napalm · 05-13-2011, 06:39 PM

buy a m10 3 way tee. Buy m10 to imperial adapter. Insert in tee.done. Ive seen them on ebay.
Brian

JDMStanced · 05-13-2011, 07:02 PM

^^that could work..lol
i'll do that if i can't find the proper one

sr23det · 05-13-2011, 07:03 PM

why are you using a Y/3 way fitting may i ask

JDMStanced · 05-13-2011, 07:11 PM

Why Y-fitting instead of T-fitting?
looking for a y fitting that looks like this http://www.google.com/imgres?imgurl=...w=1280&bih=705

JDMStanced · 05-14-2011, 11:25 PM

helppppppppppp

JDMStanced · 05-15-2011, 03:12 AM

not sure if this can be a hook up, but can anyone hook me up with 1"x 3/16" thickness flat bar's? length is not determined yet but probably around 24 " or less

05-11-2011, 12:54 AM	#1
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	Hydro ebrake set up help please Hi people, I need help with getting a hydraulic E-brake set up on my 350z. I already ordered the ebrake handle and bracket from CNC. Didn't order from this website. http://www.offroadwarehouse.com/prod...roductID/41837 i chose the one without master cylinder so that i can use that CNC balling handle with Wilwood master cylinder. WILWOOD SINGLE REMOTE RESERVOIR MASTER CYLINDER - P/N 260-10371 Ordered this too. Now i need brake lines, one T fitting, and two Y fittings. Will it be OK if i use this brake line instead of hardlines?http://www.autozone.com/autozone/acc...er=602041_0_0_ It supposedly bend easily by hand. The line will go down through the shifter area, down to the bottom of the car next to tranny, go around and connect to other lines in the passenger wheel well area. The reason im considering this is because If i go with hardlines, i'd need to buy like couple adapters to make it longer. I need about 24 ft. If it is OK to use this brake line that is linked above, i'd need a flaring tool. Perhaps someone on this forum has a flaring tool and a hardline bender that i can borrow.. Also, does anyone know (or have) where i can get 10mm x 10mm x 3/16" Y-fitting? i won't reject anyone who wants to come help me for a drink Your help will be greatly appreciated thanks Last edited by JDMStanced; 05-13-2011 at 06:06 PM..

05-12-2011, 11:36 PM	#2
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	bump for help. Last edited by JDMStanced; 05-13-2011 at 06:05 PM..

05-13-2011, 07:11 PM	#7
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	Why Y-fitting instead of T-fitting? looking for a y fitting that looks like this http://www.google.com/imgres?imgurl=...w=1280&bih=705 Last edited by JDMStanced; 05-13-2011 at 08:17 PM..

05-13-2011, 06:06 PM	#3
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	where i can get 10mm x 10mm x 3/16" Y-fitting?

05-13-2011, 06:39 PM	#4
E30Napalm Join Date: May 2011 Location: Edmonton Alberrrrrta Age: 52 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	buy a m10 3 way tee. Buy m10 to imperial adapter. Insert in tee.done. Ive seen them on ebay. Brian

05-13-2011, 07:02 PM	#5
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	^^that could work..lol i'll do that if i can't find the proper one

05-13-2011, 07:03 PM	#6
sr23det Zilvia Member Join Date: Jul 2009 Location: norcal Age: 41 Posts: 182 Trader Rating: (2) Feedback Score: 2 reviews	why are you using a Y/3 way fitting may i ask

05-14-2011, 11:25 PM	#8
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	helppppppppppp

05-15-2011, 03:12 AM	#9
JDMStanced Zilvia Addict Join Date: Apr 2011 Location: irvine Posts: 606 Trader Rating: (3) Feedback Score: 3 reviews	not sure if this can be a hook up, but can anyone hook me up with 1"x 3/16" thickness flat bar's? length is not determined yet but probably around 24 " or less