![]() |
|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
Join Date: Oct 2008
Location: Northern VA
Age: 37
Posts: 84
Trader Rating: (9)
![]() Feedback Score: 9 reviews
|
Mazworx Z32/ Endless/ Koyo & Electric Water Pump/ GT28rs/ SR etc..
Some stuff for sale: Located Northern VA
If you pay to ship it, then I will. If you have questions ask. Ill get the rest of the pictures up tomorrow. Z32 transmission with a Mazworx adapter kit. $1500 PENDING SALE Everything you need to run it, Adapter Plate, Bolts, Driveshaft, Starter, Shifter, etc ![]() Garret Dual Ball Bearing 28rs with a 60 hotside. $800 OBO It has a 4 bolt on the back with a vband adapter and a Vibrant 90 degree elbow on the cold side. Spins like a top, made 350 on a stock sr with cams @ 15psi on a Dyno Dynamics. ![]() Endless Front calipers SOLD ![]() FANS SOLD Koyo by it self $200 Electirc water pump and block off plate with AN lines SOLD ![]() ![]() ![]() Subframe things $40 PENDING ![]() Full Race manifold for SR, T3 flange single wastegate $500 PENDING ![]() Tial BOV $125 SOLD It can come with the pipe its on or I have a new flange and clamp that you can weld onto your existing set up. ![]() Tial 44mm Wastegate $200 PENDING SALE Vband on both sides, 15lbs spring ![]() Flipped Greddy intercooler made into midmount $125 SOLD It will come with two red vibrant couplers and 4 clamps I was running fixed pop ups. Small amount of trimming needs to be done to the core support. Will work with projectors as well. ![]() Polished Freddy intake $100 SOLD Comes with a block off plate on the IAC, and multiple quick disconnect vaccum fittings. Stock s13 throttle body too. ![]() ![]() SR with Greddy oilpan, Ported and Polished Head, Cometic HG, BC 264 cam and HKS adj. cam gears, autometer oil pressure and water temp sensors, alternator/ powersteering lightweight pulleys, Valve cover with custom AN breathers. $800 PENDING ![]() ![]() Vibrant Vaccum Block - $40 ![]() S14 Spindles w/ Parts Shop Max Angle Kit $300 PENDING ![]() ![]() JGY Fuel Rail with 1000cc Injectors $300 Rail will have to push lock AN fittings for either end for rubber hose ![]() Last edited by pigeon; 02-11-2012 at 04:16 PM.. Reason: update |
![]() |
![]() |
Sponsored Links |
![]() |
Bookmarks |
|
|