NC C&R radiator, gt28rs, dohc lines, s14 brakes, ichiba 5 lug, 180sx rhd, stuff look** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nassin31spr · 07-18-2011, 07:11 PM

My name is Scott, I live in Raleigh NC. Im paypal verfied with a business account and an adult. I ship fast and take care to do it right. You can text me any time for an immediate reply. No trades right now and everything is obo so ask, worst I could do is say no but I wont get mad. Thanks in advance and please bump it if you can.

919-749-6261 Scott
I have a set of sr20det coilpacks with harness. Sorry no picks in good working order, $90 obo. text for pics.
Z32 uprights, full aluminum. You can pick up the whole thing or I can just ship the uprights. $50 obo

By flashorlightning at 2011-07-17

S14 rear brakes, one ebrake line is cut and the calipers need a rebuild. S13 rear ichiba hubs in good condition. Rotors and pads all with good front s14 calipers and pads. Rear ebrake plates. Pretty straight forward. Ill sell the lot for $250 or the hubs alone for $150.

By flashorlightning at 2011-07-17

300zx 92 right e brake cable, used $25

By flashorlightning at 2011-07-17

This is pretty cool. A 1998 nissan oem rhd type x knee guard. It was attached to the dash, it keeps your knee in place when clutching it in a rhd vehicle. $50 obo

By flashorlightning at 2011-07-17

Nissan oem new but installed and never used water pump. Sr20det engine. $60 obo

By flashorlightning at 2011-07-17

Sr20det coilpack cover, $25 the rubber needs to be readheased to it but ill leave that up to the new owner. In good used condition.

By flashorlightning at 2011-07-17

Nissan 1998 type x blacktop full engine harness. Sr20det with 2 j4 ecus. Its uncut and has both sides of pigtails for the harness. $250obo.

By flashorlightning at 2011-06-15

Z32 maf. The first screen was cut out. Has pigtail and a random cold pipe attached with 3 to 2 1.5 inche couplings. $100 obo

By flashorlightning at 2011-06-15

C&R radiator, this is a full race setup for an s14 sr20det but can be used on any car. It can be mounted any way you want, it was meant for a v mount. Comes with a csi filler, and 16inch spawl fan, and has a stock s14 temp sensor welded in with bung on the radiator. $200 obo

By flashorlightning at 2011-06-15

By flashorlightning at 2011-06-15

Stock sr20det manifold with an excellent conditon heat shield. One bolt broken off on heat shield. $30 obo

By flashorlightning at 2011-06-15

This is a used T25/t28 dsm hybrid turbo for the sr20det. Its a direct bolt up. Has no fin damage and minimal shaft play. Its been sitting for a couple of years so I dont know how the seals are. Easy rebuild though. $180 obo.

By flashorlightning at 2011-06-15

By flashorlightning at 2011-06-15

Dohc 1992 nissan 240sx power steering lines. everything for the swap. $75.

By flashorlightning at 2011-06-15

Sr20det lower intake manifold with iacv still attached and some hoses. Good to go. Theres a new oem gasket on the iacv. $100 obo

By flashorlightning at 2011-06-15

full s13 chassis harness. It was a 1993 coupe with power options and moon roof. All intact with a couple of relays fuses and bulbs missing. No cuts in the harness. $150 obo.

By flashorlightning at 2011-06-15

S13 double din with brackets. I have a couple of these. $20 obo

By flashorlightning at 2011-06-15

Gt28rs china made turbo, Bought it off ebay a couple of years ago. Never ran it. Just had it on the motor and did some pulls with it. No shaft play in new used conditon. It has earls oil inlet line with fittings for the block and an earls oil restrictor line. All coolent lines oem nissan sr20det, ssac header, and ssac o2 housing. direct bolt on on a sr20det. Even has the turbo inlet oem sr with new oem gasket. $500 obo.

By flashorlightning at 2011-06-15

nassin31spr · 07-19-2011, 08:01 PM

Update, manifold is sold, dohc lines are sold. Please bump it if you can so I can get some stuff sold. Thank you.

mr.flores · 07-19-2011, 08:07 PM

knee pad is cool bro! GLWS!

RHD95S14 · 07-19-2011, 08:54 PM

I'll be in touch. I want that radiator!

nassin31spr · 07-20-2011, 10:29 AM

obo on the knee pad... you really arent going to see another on any time soon.

nassin31spr · 07-22-2011, 06:04 PM

last and final bump. Ill close it and start a new one in 3 days.

wannabe240 · 07-23-2011, 07:17 AM

How much for just the high pressure line shipped to 97045?

nassin31spr · 07-23-2011, 09:30 AM

Quote:

Originally Posted by wannabe240

How much for just the high pressure line shipped to 97045?

Im sorry the high pressure line is not sold seperatly, thanks though

*racerx2k1* · 07-23-2011, 09:54 AM

Quote:

Originally Posted by nassin31spr

Update, manifold is sold, dohc lines are sold. Please bump it if you can so I can get some stuff sold. Thank you.

Quote:

Originally Posted by nassin31spr

obo on the knee pad... you really arent going to see another on any time soon.

Quote:

Originally Posted by nassin31spr

last and final bump. Ill close it and start a new one in 3 days.

2 bump limit. You can start new thread in 3 days.

07-18-2011, 07:11 PM	#1
nassin31spr Zilvia Junkie Join Date: Jan 2007 Location: clay town NC Age: 45 Posts: 437 Trader Rating: (7) Feedback Score: 7 reviews	C&R radiator, gt28rs, dohc lines, s14 brakes, ichiba 5 lug, 180sx rhd, stuff look My name is Scott, I live in Raleigh NC. Im paypal verfied with a business account and an adult. I ship fast and take care to do it right. You can text me any time for an immediate reply. No trades right now and everything is obo so ask, worst I could do is say no but I wont get mad. Thanks in advance and please bump it if you can. 919-749-6261 Scott I have a set of sr20det coilpacks with harness. Sorry no picks in good working order, $90 obo. text for pics. Z32 uprights, full aluminum. You can pick up the whole thing or I can just ship the uprights. $50 obo By flashorlightning at 2011-07-17 S14 rear brakes, one ebrake line is cut and the calipers need a rebuild. S13 rear ichiba hubs in good condition. Rotors and pads all with good front s14 calipers and pads. Rear ebrake plates. Pretty straight forward. Ill sell the lot for $250 or the hubs alone for $150. By flashorlightning at 2011-07-17 300zx 92 right e brake cable, used $25 By flashorlightning at 2011-07-17 This is pretty cool. A 1998 nissan oem rhd type x knee guard. It was attached to the dash, it keeps your knee in place when clutching it in a rhd vehicle. $50 obo By flashorlightning at 2011-07-17 Nissan oem new but installed and never used water pump. Sr20det engine. $60 obo By flashorlightning at 2011-07-17 Sr20det coilpack cover, $25 the rubber needs to be readheased to it but ill leave that up to the new owner. In good used condition. By flashorlightning at 2011-07-17 Nissan 1998 type x blacktop full engine harness. Sr20det with 2 j4 ecus. Its uncut and has both sides of pigtails for the harness. $250obo. By flashorlightning at 2011-06-15 Z32 maf. The first screen was cut out. Has pigtail and a random cold pipe attached with 3 to 2 1.5 inche couplings. $100 obo By flashorlightning at 2011-06-15 C&R radiator, this is a full race setup for an s14 sr20det but can be used on any car. It can be mounted any way you want, it was meant for a v mount. Comes with a csi filler, and 16inch spawl fan, and has a stock s14 temp sensor welded in with bung on the radiator. $200 obo By flashorlightning at 2011-06-15 By flashorlightning at 2011-06-15 By flashorlightning at 2011-06-15 Stock sr20det manifold with an excellent conditon heat shield. One bolt broken off on heat shield. $30 obo By flashorlightning at 2011-06-15 This is a used T25/t28 dsm hybrid turbo for the sr20det. Its a direct bolt up. Has no fin damage and minimal shaft play. Its been sitting for a couple of years so I dont know how the seals are. Easy rebuild though. $180 obo. By flashorlightning at 2011-06-15 By flashorlightning at 2011-06-15 Dohc 1992 nissan 240sx power steering lines. everything for the swap. $75. By flashorlightning at 2011-06-15 Sr20det lower intake manifold with iacv still attached and some hoses. Good to go. Theres a new oem gasket on the iacv. $100 obo By flashorlightning at 2011-06-15 full s13 chassis harness. It was a 1993 coupe with power options and moon roof. All intact with a couple of relays fuses and bulbs missing. No cuts in the harness. $150 obo. By flashorlightning at 2011-06-15 S13 double din with brackets. I have a couple of these. $20 obo By flashorlightning at 2011-06-15 Gt28rs china made turbo, Bought it off ebay a couple of years ago. Never ran it. Just had it on the motor and did some pulls with it. No shaft play in new used conditon. It has earls oil inlet line with fittings for the block and an earls oil restrictor line. All coolent lines oem nissan sr20det, ssac header, and ssac o2 housing. direct bolt on on a sr20det. Even has the turbo inlet oem sr with new oem gasket. $500 obo. By flashorlightning at 2011-06-15 By flashorlightning at 2011-06-15 By flashorlightning at 2011-06-15 __________________ "Home is where the armor is"**

07-19-2011, 08:01 PM	#2
nassin31spr Zilvia Junkie Join Date: Jan 2007 Location: clay town NC Age: 45 Posts: 437 Trader Rating: (7) Feedback Score: 7 reviews	Update, manifold is sold, dohc lines are sold. Please bump it if you can so I can get some stuff sold. Thank you. __________________ *"Home is where the armor is"*

07-20-2011, 10:29 AM	#5
nassin31spr Zilvia Junkie Join Date: Jan 2007 Location: clay town NC Age: 45 Posts: 437 Trader Rating: (7) Feedback Score: 7 reviews	obo on the knee pad... you really arent going to see another on any time soon. __________________ *"Home is where the armor is"*

07-22-2011, 06:04 PM	#6
nassin31spr Zilvia Junkie Join Date: Jan 2007 Location: clay town NC Age: 45 Posts: 437 Trader Rating: (7) Feedback Score: 7 reviews	last and final bump. Ill close it and start a new one in 3 days. __________________ *"Home is where the armor is"*

07-19-2011, 08:07 PM	#3
mr.flores Zilvia Member Join Date: May 2010 Location: Houston, TX Age: 42 Posts: 169 Trader Rating: (7) Feedback Score: 7 reviews	knee pad is cool bro! GLWS!

07-19-2011, 08:54 PM	#4
RHD95S14 Zilvia Member Join Date: Apr 2009 Location: STL Age: 39 Posts: 169 Trader Rating: (3) Feedback Score: 3 reviews	I'll be in touch. I want that radiator!

07-23-2011, 07:17 AM	#7
wannabe240 Join Date: Feb 2007 Location: Portland Oregon Age: 35 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	How much for just the high pressure line shipped to 97045?