95 ka24de engine wont stay running - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

j0ey · 08-07-2011, 03:19 PM

My 1995 ka just got its timing redone (not sure if it was 100% right although done professionally) and all new seals. I drove the car for about 2 days and while i was sitting still at lights it started bogging down and would stall out if i didnt tap the gas a bit. So now my dilemma is that i was driving to a buddies house and downshifted from 2nd to 1st and the car started jerking and started bogging a whole lot worse and then stopped running. I sat there for about 20 minutes, cranked the car again and somehow found a sweetspot in the pedal to drive the car about an 1/16 mile to my friends house at under 1500 RPM's, the car has not been able to drive more than 20 yards since. Now when i crank the car it will turn over but as soon as i crank it, the RPM's are around 500 or less and will not fully crank up or stay running

please help, if you need more info i will gladly give it, this is a good as i can come up on a wim right this second

94spitfire91 · 08-07-2011, 03:25 PM

By done professionally I assume you meant at some shop. Well tell them your experiencing these problems maybe they know. Considering it started doing this soon after you got it back from them it could have very well been there fault

Taylor008 · 08-07-2011, 03:31 PM

Fool pump, foo.

Maybe. Check fuel pressure.

j0ey · 08-07-2011, 03:47 PM

thanks for the replies, hes open mon-fri so im bringing it there tommorrow, and i checked the fuel filter did a mini crank and he fuel is coming out just fine, it feel to me like the air/fuel isnt doing the right thing, but im just a noob

j0ey · 08-09-2011, 03:00 PM

incase anyone was wondering, i checked my ecu codes and it seems to be quite simple.
12- MAF sensor
34- Detenation (knock) sensor
41- Intake air temp sensor

ill be picking these up soon and ill post a little video

08-07-2011, 03:19 PM	#1
j0ey Join Date: Jul 2011 Location: Orlando Posts: 15 Trader Rating: (1) Feedback Score: 1 reviews	95 ka24de engine wont stay running My 1995 ka just got its timing redone (not sure if it was 100% right although done professionally) and all new seals. I drove the car for about 2 days and while i was sitting still at lights it started bogging down and would stall out if i didnt tap the gas a bit. So now my dilemma is that i was driving to a buddies house and downshifted from 2nd to 1st and the car started jerking and started bogging a whole lot worse and then stopped running. I sat there for about 20 minutes, cranked the car again and somehow found a sweetspot in the pedal to drive the car about an 1/16 mile to my friends house at under 1500 RPM's, the car has not been able to drive more than 20 yards since. Now when i crank the car it will turn over but as soon as i crank it, the RPM's are around 500 or less and will not fully crank up or stay running please help, if you need more info i will gladly give it, this is a good as i can come up on a wim right this second

08-07-2011, 03:25 PM	#2
94spitfire91 Zilvia Junkie Join Date: Jun 2010 Location: IL Posts: 520 Trader Rating: (15) Feedback Score: 15 reviews	By done professionally I assume you meant at some shop. Well tell them your experiencing these problems maybe they know. Considering it started doing this soon after you got it back from them it could have very well been there fault

08-07-2011, 03:31 PM	#3
Taylor008 Leaky Injector Join Date: Feb 2008 Location: Utah Age: 33 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	Fool pump, foo. Maybe. Check fuel pressure.

08-07-2011, 03:47 PM	#4
j0ey Join Date: Jul 2011 Location: Orlando Posts: 15 Trader Rating: (1) Feedback Score: 1 reviews	thanks for the replies, hes open mon-fri so im bringing it there tommorrow, and i checked the fuel filter did a mini crank and he fuel is coming out just fine, it feel to me like the air/fuel isnt doing the right thing, but im just a noob

08-09-2011, 03:00 PM	#5
j0ey Join Date: Jul 2011 Location: Orlando Posts: 15 Trader Rating: (1) Feedback Score: 1 reviews	incase anyone was wondering, i checked my ecu codes and it seems to be quite simple. 12- MAF sensor 34- Detenation (knock) sensor 41- Intake air temp sensor ill be picking these up soon and ill post a little video