FL Gobble Gobble Part out *SR* *S13* *N' Stuffs* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Josh · 11-19-2011, 09:39 AM

Updated a few prices

Everything that is engine specific is for an SR. Most is OBO, OBO does not include shipping. I'm not in a rush so lowballs will be ignored, however I am open to negation, possibly interested in trade though no car stuff (I am big into cycling so if you have cycling shit, maybe). Ask as many questions as you want, I will answer everything. If you want better pictures of a specific item please PM me. There is a lot more stuff that I will eventually post once some of this stuff is sold. If you see something that I have overpriced, no need to trash the thread, please PM me with a valid link where it can be found cheaper and I will adjust my price accordingly.

NOTE: in some of the images there are still sensors attached, they will NOT come with the item.

BNIB Painless 50003 $350shipped

FIA legal 6-point $75shipped

NGK wideband $150shipped

Bulleye Power S256 w/ oil lines $800shipped /w downpipe & straight pipe w/ flex $950+shipping w/heat shield $1000+shipping

5MM slip on $20shipped
25mm bolt-ons $100shipped
Clutch master & slave w/line $100shipped

Tanabe Sway Bar $150OBO
Cusco Strut $100OBO

Dust Shield $30

Electromotive Tec3r $2000OBO
Included:
Required sensors
Mag Bracket
ATI Dampener w/trigger wheel
DFU's with plug wires and mounting bracket
Wiring harnesses
Serial cable w/pc card

Flexalit 2x12's $200OBO

S13 Mirrors

$150OBO

I would rather not part this out because it is all wired but will if there is interest in separate gauges. Empty space was a Yosh Water Temp. Um.. Make me an offer?
Included:
STRI Oil P, Oil T, Boost
AutoMeter Fuel Level
Stew Warn Digitial Tach

Spec-M IC modified to be run as a midmount $250OBO

Full Race Mani $800shipped
Tial WG $200shipped (comes with dump)
Both $975shipped

NRG Quick Release $75shipped

NOTE: All 'shipped' is for INCONUS ONLY! Eskimo? Canuck? Etc? Ask for a shipping quote.

Big Zee · 11-19-2011, 12:08 PM

PM'd about the BV Arms

Josh · 11-21-2011, 12:47 PM

Bump

Sent from my ADR6300 using Tapatalk

Spoolin fourty · 11-21-2011, 02:24 PM

DAMN GREAT prices wish i had the cash free bump!!!!

Sliderintrainin · 11-21-2011, 02:37 PM

still have starter? i sent a message with my number.thanks

1gr8bar10der · 11-21-2011, 03:04 PM

Where in FL are you located?

Josh · 11-21-2011, 03:19 PM

Quote:

Originally Posted by Sliderintrainin

still have starter? i sent a message with my number.thanks

replied

Quote:

Originally Posted by 1gr8bar10der

Where in FL are you located?

orlando

Briou · 11-21-2011, 08:06 PM

are you selling the ps pump??

tommytwo40hands · 11-21-2011, 09:46 PM

interested in the tein outers and other suspension parts...will be sending you a pm.

Dsic240sx · 11-21-2011, 11:26 PM

how can you run the intercooler as a sidemount? pics please. i might be very interested.

Josh · 11-22-2011, 05:21 AM

Quote:

Originally Posted by tommytwo40hands

interested in the tein outers and other suspension parts...will be sending you a pm.

all the battleversion components are sold, sorry. tein outters are still available

Quote:

Originally Posted by Dsic240sx

how can you run the intercooler as a sidemount? pics please. i might be very interested.

never said anything about sidemount, midmount

here are some pics I dug up real quick, sorry for shitty cell quality, they are like 6 months old.

Quote:

Originally Posted by Briou

are you selling the ps pump??

yes, I have a full AN line system + cooler (same as oil cooler setup just smaller cooler). I have to find the HP line in my garage though. I will sell the pump alone but you will not get the AN fitting adapters.

240canni · 11-22-2011, 06:06 AM

hey pmed you about the sparco just give me a call thanks

Josh · 11-22-2011, 06:11 AM

Quote:

Originally Posted by 240canni

hey pmed you about the sparco just give me a call thanks

Didn't get a pm from you bud.

Sent from my ADR6300 using Tapatalk

240canni · 11-22-2011, 06:31 AM

i know im sorry i sent a visitor message, i just sent the pm, my bad

zz_kouki_zz · 11-22-2011, 06:43 AM

Hey Josh pm me your contact number I need some parts from you, also live in Orlando

Briou · 11-22-2011, 12:44 PM

how much for the ps pump with all the an lines?

Josh · 11-22-2011, 02:24 PM

Quote:

Originally Posted by Briou

how much for the ps pump with all the an lines?

all lines to include the cooler/fan setup?

lightsource · 11-22-2011, 05:31 PM

Is that a rear or front sway bar?

Briou · 11-22-2011, 06:38 PM

no just the pump and the steering lines themselves...no cooler or cooler lines

Josh · 11-22-2011, 07:05 PM

Quote:

Originally Posted by lightsource

Is that a rear or front sway bar?

front

Quote:

Originally Posted by Briou

no just the pump and the steering lines themselves...no cooler or cooler lines

let me find the high pressure line first then Ill get back with you

DallasTXjdm · 11-22-2011, 07:09 PM

You got a PM

tommytwo40hands · 11-22-2011, 11:13 PM

tien outers sold to me...thanks man

Briou · 11-23-2011, 09:54 AM

Quote:

Originally Posted by Josh

let me find the high pressure line first then Ill get back with you

Ok thanks man...If you can't find it i will take the pump by its self....and you wouldn't happen to know if those PE injectors work with the greddy top feed fuel rail?

Josh · 11-23-2011, 01:16 PM

Quote:

Originally Posted by Briou

Ok thanks man...If you can't find it i will take the pump by its self....and you wouldn't happen to know if those PE injectors work with the greddy top feed fuel rail?

They do. I will also include the clip pigtails if you want them.

Briou · 11-23-2011, 05:31 PM

maybe we could work out a package deal for the injectors and ps pump??

Josh · 11-23-2011, 06:13 PM

Quote:

Originally Posted by Briou

maybe we could work out a package deal for the injectors and ps pump??

Im sure we can come to a deal, ill get with you tomorrow after I look around in the garage for that line.

GTR_240SX · 11-23-2011, 06:26 PM

You still have the the Z32 Ebrake assembly I'm interested in the rear brakes and ebrake assembly...

Josh · 11-23-2011, 07:15 PM

Quote:

Originally Posted by GTR_240SX

You still have the the Z32 Ebrake assembly I'm interested in the rear brakes and ebrake assembly...

I do. PM me.

Briou · 11-24-2011, 12:17 AM

ok take your time I'm in no rush really...I probably won't be back on her until newt week anyway...I'll hit you up then!!

gunmetalr32 · 11-24-2011, 12:23 AM

Quote:

Originally Posted by Josh

all the battleversion components are sold, sorry. tein outters are still available

never said anything about sidemount, midmount

here are some pics I dug up real quick, sorry for shitty cell quality, they are like 6 months old.

yes, I have a full AN line system + cooler (same as oil cooler setup just smaller cooler). I have to find the HP line in my garage though. I will sell the pump alone but you will not get the AN fitting adapters.

loving the mid mount set up

11-19-2011, 09:39 AM	#1
Josh Zilvia Member Join Date: Mar 2006 Location: Party Town, Florida Posts: 182 Trader Rating: (5) Feedback Score: 5 reviews	*Gobble Gobble Part out SR* S13 N' Stuffs UPDATED** Updated a few prices Everything that is engine specific is for an SR. Most is OBO, OBO does not include shipping. I'm not in a rush so lowballs will be ignored, however I am open to negation, possibly interested in trade though no car stuff (I am big into cycling so if you have cycling shit, maybe). Ask as many questions as you want, I will answer everything. If you want better pictures of a specific item please PM me. There is a lot more stuff that I will eventually post once some of this stuff is sold. If you see something that I have overpriced, no need to trash the thread, please PM me with a valid link where it can be found cheaper and I will adjust my price accordingly. NOTE: in some of the images there are still sensors attached, they will NOT come with the item. BNIB Painless 50003 $350shipped FIA legal 6-point $75shipped NGK wideband $150shipped Bulleye Power S256 w/ oil lines $800shipped /w downpipe & straight pipe w/ flex $950+shipping w/heat shield $1000+shipping 5MM slip on $20shipped 25mm bolt-ons $100shipped Clutch master & slave w/line $100shipped Tanabe Sway Bar $150OBO Cusco Strut $100OBO Dust Shield $30 Electromotive Tec3r $2000OBO Included: Required sensors Mag Bracket ATI Dampener w/trigger wheel DFU's with plug wires and mounting bracket Wiring harnesses Serial cable w/pc card Flexalit 2x12's $200OBO S13 Mirrors $150OBO I would rather not part this out because it is all wired but will if there is interest in separate gauges. Empty space was a Yosh Water Temp. Um.. Make me an offer? Included: STRI Oil P, Oil T, Boost AutoMeter Fuel Level Stew Warn Digitial Tach Spec-M IC modified to be run as a midmount $250OBO Full Race Mani $800shipped Tial WG $200shipped (comes with dump) Both $975shipped NRG Quick Release $75shipped NOTE: All 'shipped' is for INCONUS ONLY! Eskimo? Canuck? Etc? Ask for a shipping quote. Last edited by Josh; 12-23-2011 at 09:39 AM..

11-21-2011, 02:37 PM	#5
Sliderintrainin Zilvia Member Join Date: Sep 2011 Location: NY Posts: 266 Trader Rating: (12) Feedback Score: 12 reviews	still have starter? i sent a message with my number.thanks Last edited by Sliderintrainin; 11-21-2011 at 02:44 PM.. Reason: sent private message

11-22-2011, 06:43 AM	#15
zz_kouki_zz Zilvia Addict Join Date: Sep 2009 Location: Orlando FL/ Redlands Ca Age: 44 Posts: 930 Trader Rating: (13) Feedback Score: 13 reviews	Hey Josh pm me your contact number I need some parts from you, also live in Orlando __________________ 1997 KOUKI SR'D SKEPTRON POWER!

11-19-2011, 12:08 PM	#2
Big Zee Zilvia Addict Join Date: Oct 2005 Location: BC Age: 40 Posts: 860 Trader Rating: (10) Feedback Score: 10 reviews	PM'd about the BV Arms

11-21-2011, 12:47 PM	#3
Josh Zilvia Member Join Date: Mar 2006 Location: Party Town, Florida Posts: 182 Trader Rating: (5) Feedback Score: 5 reviews	Bump Sent from my ADR6300 using Tapatalk

11-21-2011, 02:24 PM	#4
Spoolin fourty BANNED Join Date: Nov 2011 Location: OHIO Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	DAMN GREAT prices wish i had the cash free bump!!!!

11-21-2011, 03:04 PM	#6
1gr8bar10der Post Whore! Join Date: Aug 2009 Location: Tampa/Bangkok Posts: 3,431 Trader Rating: (77) Feedback Score: 77 reviews	Where in FL are you located?

11-21-2011, 08:06 PM	#8
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	are you selling the ps pump??

11-21-2011, 09:46 PM	#9
tommytwo40hands Leaky Injector Join Date: Jun 2010 Location: Springfield, MO Age: 36 Posts: 145 Trader Rating: (2) Feedback Score: 2 reviews	interested in the tein outers and other suspension parts...will be sending you a pm.

11-21-2011, 11:26 PM	#10
Dsic240sx Zilvia Member Join Date: Apr 2010 Location: 714 Age: 33 Posts: 281 Trader Rating: (6) Feedback Score: 6 reviews	how can you run the intercooler as a sidemount? pics please. i might be very interested.

11-22-2011, 06:06 AM	#12
240canni Join Date: Sep 2010 Location: jax fl Age: 31 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	hey pmed you about the sparco just give me a call thanks

11-22-2011, 06:31 AM	#14
240canni Join Date: Sep 2010 Location: jax fl Age: 31 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	i know im sorry i sent a visitor message, i just sent the pm, my bad

11-22-2011, 12:44 PM	#16
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	how much for the ps pump with all the an lines?

11-22-2011, 05:31 PM	#18
lightsource Zilvia FREAK! Join Date: Jul 2008 Location: Compton, CA Posts: 1,153 Trader Rating: (41) Feedback Score: 41 reviews	Is that a rear or front sway bar?

11-22-2011, 06:38 PM	#19
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	no just the pump and the steering lines themselves...no cooler or cooler lines

11-22-2011, 07:09 PM	#21
DallasTXjdm Zilvia Junkie Join Date: Sep 2011 Location: USA Posts: 581 Trader Rating: (41) Feedback Score: 41 reviews	You got a PM

11-22-2011, 11:13 PM	#22
tommytwo40hands Leaky Injector Join Date: Jun 2010 Location: Springfield, MO Age: 36 Posts: 145 Trader Rating: (2) Feedback Score: 2 reviews	tien outers sold to me...thanks man

11-23-2011, 05:31 PM	#25
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	maybe we could work out a package deal for the injectors and ps pump??

11-23-2011, 06:26 PM	#27
GTR_240SX Zilvia Junkie Join Date: Apr 2010 Location: Chicago, IL Age: 39 Posts: 343 Trader Rating: (2) Feedback Score: 2 reviews	You still have the the Z32 Ebrake assembly I'm interested in the rear brakes and ebrake assembly...

11-24-2011, 12:17 AM	#29
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	ok take your time I'm in no rush really...I probably won't be back on her until newt week anyway...I'll hit you up then!!