S14 chassis (redtopSR20) heater Hose Route - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrFairlady · 02-19-2012, 01:33 PM

Need some help.
No Heat after trying Multiple diff Things.

Posted in 2-3 diff areas of the forum and Searched Everywhere, and No one shows how to Route S14 heater hoses with a Red/Blk top Sr20. Only S13's and a friend has a S14 Sr20's in his S14 that are routed diff since the manifold is Diff.

Which hose to heater Core Goes where?
I routed mine Similar to my S13 with the same engine but for some reason I had heat at 1 point and It now Does not work.
Car also wouldn't quite get to normal Operating Temp (61degrees Cel) so My car is over-cooling or I thought the Thermo was staying Open, untill I changed Thermostats yesterday, back to OEM and re-bled system 2-3 times before that & again. Finally its running at 81degree's Cel with cardboard in front of rad/condenser area also.

help.

rear heater hoses not getting hot (Update: they get hot now**) and Don't seem to hold pressure like the Front rad hoses do.
-Checked heater valve
-Swapped from Nismo Thermo to OEM
-Checked Fuses and all servo Motors
-Stock Clutch fan and Shroud

02-19-2012, 01:33 PM	#1
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 46 Posts: 1,701 Trader Rating: (31) Rides Gallery: MrFairlady Feedback Score: 31 reviews	S14 chassis (redtopSR20) heater Hose Route Need some help. No Heat after trying Multiple diff Things. Posted in 2-3 diff areas of the forum and Searched Everywhere, and No one shows how to Route S14 heater hoses with a Red/Blk top Sr20. Only S13's and a friend has a S14 Sr20's in his S14 that are routed diff since the manifold is Diff. Which hose to heater Core Goes where? I routed mine Similar to my S13 with the same engine but for some reason I had heat at 1 point and It now Does not work. Car also wouldn't quite get to normal Operating Temp (61degrees Cel) so My car is over-cooling or I thought the Thermo was staying Open, untill I changed Thermostats yesterday, back to OEM and re-bled system 2-3 times before that & again. Finally its running at 81degree's Cel with cardboard in front of rad/condenser area also. help. rear heater hoses not getting hot (Update: they get hot now) and Don't seem to hold pressure like the Front rad hoses do. -Checked heater valve -Swapped from Nismo Thermo to OEM -Checked Fuses and all servo Motors -Stock Clutch fan and Shroud __________________ z-tERty-2** Last edited by MrFairlady; 02-21-2012 at 06:28 AM..