TX SR20 Super Part Deal! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Angronrb25 · 04-23-2012, 02:05 PM

Well it is time for me to sell the SR in my coupe. This motor has been super good to me. I am still in debate if I am even going to keep the body so for now I am selling the motor till I decide.
Motor is still in the car running and driving.
This is the most complete setup ever!
Leonidas Motor
Z32 MAF
CMS Intercooler Pipes
Greddy TD06SH 20g
Unknown Front Mount Intercooler
Greddy Type RS Blow Off Valve
Greddy Intake Manifold
Greddy Fuel Rail Adapter
Nismo 740cc Injectors
Greddy Oil Cap
Greddy Rocker Arm Stops
BC 264/264 Intake Exhaust Cams
BC +1mm Over Sized Vales
Slight Port and Polish Head
BC Titanium Springs and Retainers
ARP Head Studs
Apexi 1.1mm Head gasket
ARP Rod and Main Bolts
ISIS Oil Pan
Greddy Exhaust Manifold (CMS modified for LHD)
Greddy 44mm Waste gate w/screamer pipe
Greddy Down pipe
ISIS Test Pipe
ISIS 3” Exhaust
Mishimoto Radiator
Greddy Radiator Cap
ISIS Silicone Hoses
ISIS Pulleys
Sard Fuel Pressure Regulator w/gauge
Splitfire Coil Packs
Nismo Motor Mounts
Nismo Tranny Mount
DSS 1pc. Aluminum Driveshaft
S13 SR to S13 Wiring Harness
Enthalpy Tuned Ecu
3 60mm Greddy Gauges
Greddy E0-1
Greddy Turbo Timer
AEM Wideband
Only thing wrong with it is the Enthalpy Tune makes the car run rich, but I have the fuel pressure set lower to compansate some!
Basically I will pull straigt out of my car and give you everything! I am only keeping the Overflow tank and the Chase Bay Power Steering Canister.
This is a Intercooler to Exhaust swap for sale!
Asking 6k for everything.
I will part out only if I canget some of the big items sold! I.E. Turbo Kit, All Gauges, Long Block, etc.

Thank you
Leonidas
832-428-9673

godrifttoday · 04-23-2012, 02:07 PM

6k and no car??

Angronrb25 · 04-23-2012, 02:35 PM

Quote:

Originally Posted by godrifttoday

6k and no car??

Yes sir! The Turbo Kit alone is 4500-5500 new. I feel it is fair and I am Negotiable.

Edwin562 · 04-23-2012, 02:40 PM

price is abit high, Got a dyno sheet to see the number this motor can produce?

Angronrb25 · 04-23-2012, 03:51 PM

Quote:

Originally Posted by Edwin562

price is abit high, Got a dyno sheet to see the number this motor can produce?

Honestly Mr Edwin, I believe it would be hard to find little lone build a SR with these quality parts for under 6k. Turbo kit alone from RHD Japan is 5400. This is an authentic kit not a ebay slap together top mount. Gauges are another 1400 or so. 2 Greddy Peak and Hold 60mm guages, 1 Electronic 60mm, 1 AEM Wideband, 1 Greddy Turbo Timer w/Harness, 1 E0-1 Electronic Boost Controller. So now I have surpassed the 6k I am asking and havent even touched the block, head, driveline.

This is a FULL SWAP. All Electronics, Motor, Turbo, Driveshaft, Exhaust, Harness, Radiator, Oil Cooler, All Mods, and Everything to pull out of my car and into the next s13!

dave7 · 04-23-2012, 05:39 PM

I might be interested in injectors and maf if you part out.

sr20time · 04-23-2012, 05:48 PM

interested in FPR and your Intake Tubing into the greddy intake.

heiyuu · 04-23-2012, 06:00 PM

price for these parts shipped to 58265 please!

Greddy Intake Manifold
DSS 1pc. Aluminum Driveshaft if it is for a non-abs

Angronrb25 · 04-23-2012, 06:18 PM

Quote:

Originally Posted by heiyuu

price for these parts shipped to 58265 please!

Greddy Intake Manifold
DSS 1pc. Aluminum Driveshaft if it is for a non-abs

Quote:

Originally Posted by dave7

I might be interested in injectors and maf if you part out.

Quote:

Originally Posted by sr20time

interested in FPR and your Intake Tubing into the greddy intake.

I will part if the turbo kit sells! That will fund the shipping and starting of the next motor build!

1slicktwo4oh · 04-23-2012, 06:38 PM

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

Angronrb25 · 04-23-2012, 08:11 PM

Quote:

Originally Posted by 1slicktwo4oh

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

Like I said only if the Turbo kit sells!

CeezS13 · 04-24-2012, 12:41 AM

For everything you're getting with it, the price seems fair. What numbers is this set up putting down?

Angronrb25 · 04-24-2012, 04:57 AM

Quote:

Originally Posted by CeezS13

For everything you're getting with it, the price seems fair. What numbers is this set up putting down?

The Turbo is good to 470ish I had a FP 20g before this turbo and the oversize valves and made 417whp.

I am talking with enthalpy now about the running rich problem

Angronrb25 · 04-24-2012, 02:36 PM

Quote:

Originally Posted by 1slicktwo4oh

If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

If I get the turbo kit sold then I will part!

Angronrb25 · 04-25-2012, 02:22 PM

Bump #1

Any offers?

Angronrb25 · 04-26-2012, 11:25 AM

Bump #2

Any offers?

Angronrb25 · 05-01-2012, 09:17 PM

Greddy TD06SH 20g(good to 460ish whp)
Greddy Exhaust manifold(modified for LHD)
Manifold Header Wrapped
Greddy R08 External wastegate w/screamerpipe
Greddy Downpipe

All for 2500obo!

If anybody is interested! I am also negotiable on the kit!

Akuma · 05-01-2012, 09:26 PM

Damn that whole setup would be nice...
Wish I had a spare 6k...

04-23-2012, 06:00 PM	#8
heiyuu Zilvia Addict Join Date: Jun 2007 Location: winnipeg Age: 39 Posts: 875 Trader Rating: (6) Feedback Score: 6 reviews	price for these parts shipped to 58265 please! Greddy Intake Manifold DSS 1pc. Aluminum Driveshaft if it is for a non-abs __________________

05-01-2012, 09:26 PM	#18
Akuma Join Date: Jan 2007 Location: OR Age: 43 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Damn that whole setup would be nice... Wish I had a spare 6k... __________________

04-23-2012, 02:05 PM	#1
Angronrb25 Zilvia Member Join Date: Feb 2009 Location: Houston Age: 43 Posts: 262 Trader Rating: (6) Feedback Score: 6 reviews	SR20 Super Part Deal! Well it is time for me to sell the SR in my coupe. This motor has been super good to me. I am still in debate if I am even going to keep the body so for now I am selling the motor till I decide. Motor is still in the car running and driving. This is the most complete setup ever! Leonidas Motor Z32 MAF CMS Intercooler Pipes Greddy TD06SH 20g Unknown Front Mount Intercooler Greddy Type RS Blow Off Valve Greddy Intake Manifold Greddy Fuel Rail Adapter Nismo 740cc Injectors Greddy Oil Cap Greddy Rocker Arm Stops BC 264/264 Intake Exhaust Cams BC +1mm Over Sized Vales Slight Port and Polish Head BC Titanium Springs and Retainers ARP Head Studs Apexi 1.1mm Head gasket ARP Rod and Main Bolts ISIS Oil Pan Greddy Exhaust Manifold (CMS modified for LHD) Greddy 44mm Waste gate w/screamer pipe Greddy Down pipe ISIS Test Pipe ISIS 3” Exhaust Mishimoto Radiator Greddy Radiator Cap ISIS Silicone Hoses ISIS Pulleys Sard Fuel Pressure Regulator w/gauge Splitfire Coil Packs Nismo Motor Mounts Nismo Tranny Mount DSS 1pc. Aluminum Driveshaft S13 SR to S13 Wiring Harness Enthalpy Tuned Ecu 3 60mm Greddy Gauges Greddy E0-1 Greddy Turbo Timer AEM Wideband Only thing wrong with it is the Enthalpy Tune makes the car run rich, but I have the fuel pressure set lower to compansate some! Basically I will pull straigt out of my car and give you everything! I am only keeping the Overflow tank and the Chase Bay Power Steering Canister. This is a Intercooler to Exhaust swap for sale! Asking 6k for everything. I will part out only if I canget some of the big items sold! I.E. Turbo Kit, All Gauges, Long Block, etc. Thank you Leonidas 832-428-9673

04-23-2012, 02:07 PM	#2
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 41 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	6k and no car?? __________________ NEED Bolt kits for your car?

04-23-2012, 02:40 PM	#4
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 35 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	price is abit high, Got a dyno sheet to see the number this motor can produce?

04-23-2012, 05:39 PM	#6
dave7 Leaky Injector Join Date: Mar 2012 Location: DC Age: 39 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	I might be interested in injectors and maf if you part out.

04-23-2012, 05:48 PM	#7
sr20time Zilvia Junkie Join Date: Oct 2010 Location: canada Posts: 597 Trader Rating: (8) Feedback Score: 8 reviews	interested in FPR and your Intake Tubing into the greddy intake.

04-23-2012, 06:38 PM	#10
1slicktwo4oh Zilvia Addict Join Date: Dec 2010 Location: los angeles Age: 41 Posts: 949 Trader Rating: (45) Feedback Score: 45 reviews	If you part..interested in the greddy oil cap, coolant temp adapter, coilpack cover shipped to 90602

04-24-2012, 12:41 AM	#12
CeezS13 Zilvia Junkie Join Date: Dec 2009 Location: Los Angeles Age: 34 Posts: 427 Trader Rating: (13) Feedback Score: 13 reviews	For everything you're getting with it, the price seems fair. What numbers is this set up putting down?

04-25-2012, 02:22 PM	#15
Angronrb25 Zilvia Member Join Date: Feb 2009 Location: Houston Age: 43 Posts: 262 Trader Rating: (6) Feedback Score: 6 reviews	Bump #1 Any offers?

04-26-2012, 11:25 AM	#16
Angronrb25 Zilvia Member Join Date: Feb 2009 Location: Houston Age: 43 Posts: 262 Trader Rating: (6) Feedback Score: 6 reviews	Bump #2 Any offers?

05-01-2012, 09:17 PM	#17
Angronrb25 Zilvia Member Join Date: Feb 2009 Location: Houston Age: 43 Posts: 262 Trader Rating: (6) Feedback Score: 6 reviews	Greddy TD06SH 20g(good to 460ish whp) Greddy Exhaust manifold(modified for LHD) Manifold Header Wrapped Greddy R08 External wastegate w/screamerpipe Greddy Downpipe All for 2500obo! If anybody is interested! I am also negotiable on the kit!