S13 ebrake caliper spring help??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bobanoid · 05-27-2012, 02:16 PM

So the ebrake functions fine on one wheel but it Turns out that the passenger side caliper has a spring where the cable mounts and that side is tensioned a lot less then the drivers side. So my handbrake can't grab both evenly

My question is if I can replace just the spring, or if I can somehow adjust it??

Worst case scenario I can replace the whole caliper but they were just rebuilt by the previous owner and I'd prefer not to. Thanks guys

05-27-2012, 02:16 PM	#1
bobanoid Join Date: Apr 2012 Location: Roslyn NY Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	S13 ebrake caliper spring help??? So the ebrake functions fine on one wheel but it Turns out that the passenger side caliper has a spring where the cable mounts and that side is tensioned a lot less then the drivers side. So my handbrake can't grab both evenly My question is if I can replace just the spring, or if I can somehow adjust it?? Worst case scenario I can replace the whole caliper but they were just rebuilt by the previous owner and I'd prefer not to. Thanks guys