Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 05-30-2012, 09:44 PM   #1
marryson
Leaky Injector
 
Join Date: Apr 2011
Location: Vancouver
Age: 34
Posts: 67
Trader Rating: (0)
marryson is an unknown quantity at this point
Feedback Score: 0 reviews
93 240sx S13 Hesitates when accelerating on low rev

I have posted this before but i thought I fixed the problem..... so here i am again. my car would hesitate (Rock back and forth) when accelerating below 2000rpm. This started happening when my coolants were leaking and I was driving for 10-20 minutes without even knowing about it. when I got home, there was light smoke coming out of the engine somewhere. when I fix the leak and replace my coolant, everything is fine except for the hesitation issue. I changed my spark plug but that didnt help. any ideas ??
marryson is offline   Reply With Quote
Sponsored Links
Old 08-13-2012, 08:16 PM   #2
drifter1992
 
Join Date: Jul 2012
Location: texas
Age: 31
Posts: 8
Trader Rating: (0)
drifter1992 is an unknown quantity at this point
Feedback Score: 0 reviews
my buddy had a hestitation, he changed his plug wires and it helped but still had a bit of hesitation and then changed his igntion wire from the distributor to the igntion coil and it went away, so maybe try that
drifter1992 is offline   Reply With Quote
Old 08-13-2012, 08:28 PM   #3
marryson
Leaky Injector
 
Join Date: Apr 2011
Location: Vancouver
Age: 34
Posts: 67
Trader Rating: (0)
marryson is an unknown quantity at this point
Feedback Score: 0 reviews
thank you very much for replying to this old post, I will give it a try thx
marryson is offline   Reply With Quote
Old 08-13-2012, 08:49 PM   #4
S13-1UZ
 
Join Date: May 2012
Location: Long Beach
Age: 33
Posts: 35
Trader Rating: (0)
S13-1UZ is an unknown quantity at this point
Feedback Score: 0 reviews
Check the egr or egr backpressure valve with a vacuum tester. It caused hesitation on my KA S13.
S13-1UZ is offline   Reply With Quote
Old 08-23-2012, 10:13 AM   #5
RV_S13
 
Join Date: Aug 2012
Location: Orange County
Age: 34
Posts: 17
Trader Rating: (0)
RV_S13 is an unknown quantity at this point
Feedback Score: 0 reviews
Plugs, wires, check your timing. It's supposed to be 18-22* btdc. Mine was set at 25. It idled smooth but hesitated like a mofo. Once I set it back down I gained a ton of torque back.
RV_S13 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net