MD Built KA24DE-T 400hp Set Up

[ATLspeed]

Name: Nick
Location: Eden, MD 21822
Contact: PM or 410-845-673eight
Payment: Cash/Paypal

~~Buy Combo parts and I will discount them~~

1) Built KA24DE w/30k- $1500

• Block decked, bored, honed .20
• 9.1 CP Pistons
• AMS Rods
• ARP Rod Bolts
• ARP Headstuds
• ARP Main Studs
• Clevite Rod Bearings
• Clevite Main Bearings
• Felpro Headgasket
• -10 AN tapped oilpan
• 248/248 "hot cam" swap
• Quest Alternator
• SR lightweight Oversized waterpump pully
• Thermo IM Gasket
• EGR Block off plate

2) Competition Clutch, Stage 5 (4 puck unsprung) $100 shipped obo









3) XTD 11lbs Lightweight flywheel $120 shipped





5) [2] KA Transmission - $100 ea/pu



6) Holset he351cw (internal wg flapper needs to be tacked/welded shut) - $450 shipped
-- Will include v-ban downpipes for an additional $150











7) Enthalpy ECU (tuned for 850cc, z32, holset he351) - $225 shipped

(ignore the OLD turn writing on the cover)






10) EMUSA Wastegate (36mm I believe)- $40 shipped



11) s13 KA Valve Cover - $30+shipping



12) KA Radiator - $30+shipping




14) s13 KA-DE DC Header - $200

[LOVERboy]

Willing to part out just the manifold? How does it sit?


Sunny D.-

[brudacille]

JE Performance is a pretty sweet shop although I only bought some 370cc SR injectors from them.. So many Rb26's in s13's and s14's to look at and drool over... GLWS, nice setup, very good price!

[ATLspeed]

Originally Posted by LOVERboy

Willing to part out just the manifold? How does it sit?


Sunny D.-

IF i were to sell it it would be $400+shipping

[imbored205]

cheezit's shipped to 95125?

[unhealer]

all that jizz on that vlave cover

[KOME]

$800 shipped for turbo kit?

Got money ready to be sent.

[PureRush]

How much for the short shifter

[ATLspeed]

Originally Posted by KOME

$800 shipped for turbo kit?

Got money ready to be sent.

Manifold - $400
wrap -$100
Turbo - $400
Injectors -$200
Maf -$75
Enthalpy ecu - $350
TOTAL = $1525

...can't do $800

[jssilc]

who welded the manifold? im interested in it

[PureRush]

Dude how much for the short shifter?

[KOME]

How about just the manifold and turbo?

[Nvkreationz]

I pmd awhile back but no reply. I can pick up and have cash ready. Lmk

[Badwrex]

you have been pm sir!!!

[brudacille]

not sure how this post got here, hmmm..... (Edited 6/28/2012)

[ATLspeed]

bump

parting out

[Badwrex]

1300 for the motor

[godrifttoday]

Post pics of manifold welds

[nismo91blk240sx]

Quest alternator shipped to 46517

[itwillboost]

I am interested in the manifold if you drop the price slightly, also pm me pictures of all the welds please. I have cash in hand.

[ATLspeed]

Originally Posted by nismo91blk240sx

Quest alternator shipped to 46517

not parting anything off the motor

Originally Posted by Badwrex

1300 for the motor

$1400 if you pick it up by the 19th...NOT shipping

Originally Posted by godrifttoday

Post pics of manifold welds

Originally Posted by itwillboost

I am interested in the manifold if you drop the price slightly, also pm me pictures of all the welds please. I have cash in hand.

I will have to take the wrap off and take pics

[anti tyler]

I see you said the ECU was tuned for that turbo, but what about the boost pressure? piston size? etc...

I'm interested in the ecu or even ecu/turbo combo but for the $200 I could just retune my enthalpy board.

LMK

[ATLspeed]

Originally Posted by anti tyler

I see you said the ECU was tuned for that turbo, but what about the boost pressure? piston size? etc...

I'm interested in the ecu or even ecu/turbo combo but for the $200 I could just retune my enthalpy board.

LMK

S13 ka24de enthalpy ecu:
- 850cc
- z32/n62 maf
- Holset HE351cw (20psi - ran up to 25psi no prob)
- 9.1cr
- 8k rev limit
- idles at 900rpm

If you have an enthalpy board you will be better off getting it retuned if you don't have 850cc injectors. If you do have 850cc ill do
$580 shipped for turbo+ecu

[anti tyler]

I already have 850cc injectors and a setup etc. but I wont be using a turbo at 20lbs, and I don't like high rev so I'll stick to retuning mine no disrespect. Thanks

[ATLspeed]

No prob. I'm anti high rev on stock valvetrain, used a separate limiter at 7k. I had plans on building the head to rev to 8k along with a bigger lagging turbo

The Holset turbos don't really perform all to well under 15psi since they don't "wake up" until 20-26psi

[bgepperson]

you have an extra 5 speed? if yu do how much

[ATLspeed]

Originally Posted by bgepperson

you have an extra 5 speed? if yu do how much

$100 picked up

[LOVERboy]

Is the manifold twin scroll?


Sunny D.-

[ATLspeed]

Originally Posted by LOVERboy

Is the manifold twin scroll?


Sunny D.-

Manifold is sold, but no it wasn't

[slipnslide88]

woulldve loved that manifold great price