![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
![]() |
sr20det tranny.driveshaft.bov problems!!! please help me!!
hey guys.. got a couple problems with the s13 sr20det in my s14... first off, when im driving at certain rpms, the shifter and clutch pedal vibrate very badly.. usually at high speeds as well... im thinking it either unbalanced driveshaft, bad u-joints or just a bad tranny.. secondly, when i take the motor over 5k rpm, i cant shift smoothly.. its like i go to clutch and try to pull the shifter out of 1rst and it takes me forever to get it out of first like its stuck... happens in gear 2 as well... i think there might be something wrong with the clutch line as well.. changed out new master and slave cylinders and bled it properly... man this sucks.. cant even race cuz i cant shift and the vibration is annoying....lastly, i have a blitz dd bov atmospheric.. the car dies when the rpms jump.. when the rpm drops from over 3k rpm, the needle drops to 0 and the car dies... people have told me to adjust the spring but that didnt help.. any other suggestions. thanks
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 | |
Zilvia Member
![]() Join Date: Dec 2003
Location: Virginia beach, VA.
Age: 45
Posts: 207
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
the BOV is a common problem for a SR but what you are explaining sounds as though you need to reset the whole spring and work it up as needed....... |
|
![]() |
![]() |
![]() |
#4 | |
BANNED
![]() Join Date: Jul 2001
Location: Canyon Country, CA
Age: 44
Posts: 714
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
Check everything else, b4 thinking you got a bad tranny. These trannys are pretty tough ![]() |
|
![]() |
![]() |
![]() |
#5 |
Leaky Injector
![]() |
yea.. know bout the bov and maf thing.. might just switch out bov entirely... carrier bearing.. where is that.. i can try that.. also, why is it so hard to shift at high rpms..
|
![]() |
![]() |
![]() |
#6 | |
Zilvia Member
![]() Join Date: Dec 2003
Location: Virginia beach, VA.
Age: 45
Posts: 207
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
Maybe Im wrong .............. |
|
![]() |
![]() |
![]() |
#7 |
Leaky Injector
![]() |
no... i dont think it dies cuz i run to rich.. it backfires cuz its rich... i think it dies cuz the bov stays open too long and and no air can get to the manifold...what i need to know is how can i get the valve to close quicker...
|
![]() |
![]() |
![]() |
#8 | |
Zilvia Member
![]() Join Date: Dec 2003
Location: Virginia beach, VA.
Age: 45
Posts: 207
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
I was talking to kazuo...........I getting at the same thing you are........ |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|