s14 tension rod problem?

[missionsix010]

ok so here is the problem......
the car befor i put the tension rods would shake between 60 and 80 but it was very little and maybe a little bit more when i got off the gas but it was never a big deal. i brought it to a shop months ago for a differnt problem and they said i needed tension rods.

so a few days ago got new tension rods(isis) matched them up the best i could be for putting them in. after putting them in at like 60 you can feel it start pulling to the right alittle and shaking and any thing over 65 the car shakes so much it might fall apart.any ideas???

in the morning it was driving fine with a very little shake(stock tension rods) that went away with increased speed then 4 hours later(w/new isis tension rods) cant even go over 65 with out feeling like the car is going to shake apart

[omgRWDgoodness!]

So you make another thread, copied word for word, asking for help about the same shit you posted half an hour ago.

Goddamn fucking newbs!!!!





/ragequit

[missionsix010]

yeah i did, trying to get more input have a problem with it deal with it...newbie lol pls sry dont spend my life on forums tell you do cause that whip is wack so go talk shit on some other thread

[blueshark123]

get a alignment

[missionsix010]

getting one tmw but have a feeling that it isnt that cause doesnt really pull till 50mph and the shaking doesnt start to like 60,,,but when i say shake i mean it shakes man cant hold ther steering wheel with out your arm going numb

[fliprayzin240sx]

alignment, wheels balanced, check your wheel bearings too. Theres only so much shit that can cause something like this...

[brndck]

/\/\/\/\ what he said.
What condition are your tires in? If they're same size front and rear you might consider rotating them as well. I've seen tires with separating tread cause some straaaaaaange problems.

[missionsix010]

getting one tmw and checking wheels but dont think its that cause it wasnt like it been going on for month and its been getting worst, in the moring when i went to pick up the tension rods drove fine with a little shake but was nothing i was worried about and hours later once the new one where in this happen so wheels couldnt have got tht unbalanced in the matter of hours

[missionsix010]

as for the the wheel bearing same thing there has been no sign of wear on them and where fine in the moring when i drove it to 240sxmotoring and that same day put them in and now here i am trying to fig out what the hell happen

[KA-Life86]

Originally Posted by blueshark123

a alignment

A alignment

[missionsix010]

ill let you all know what happens after i get one tmw but in the mean time any thing else should check?

dont belive it to be the bearings or tie rods there is no play or sounds when i move the wheel and what not

[SuperBlackS14]

Wheel balance.

[TheZ31Guy]

Are your tie-rods bad?

Jack up your front end and see if you can shake your wheels/tires

[BC S14]

99% of the time its shitty tires. However s14's do have a steering rack problem nobody has mentioned. Theres a spring in the rack that looses tension as the car gets older. It's a total pita to replace, but I thing nico has a writeup.

[missionsix010]

superblacks14- i dont think its that cause it was fine when i drove to pick the tension rods up did nothing during the drive that would unbalance them.

thez31guy- ive checked i jacked it up also to see if the wheel its self was loose but every thing solid

[missionsix010]

ill put my old rims on they have fresh tires and see but idk if its that ill let you know

[missionsix010]

lets say it is the tires wouldnt have shown signs and would be getting worst? they are was fine leading up to the day i changed the tension rods i was driving on highs at 75+ it had a lil shake but very little nothing i would think to fix or worry about,,and later that night after finshed changing this happed...just trying to understand why it would be tires

[omgRWDgoodness!]

Originally Posted by missionsix010

*incoherent gibberish* that whip is wack *more incoherent gibberish*

Blind, retarded, and illiterate? Lol, end yourself now pls.

[fliprayzin240sx]

Jesus Christ...you ask us what to check for and makes multiple fucking threads asking the same fucking thing. We tell you what to check, but like a fucking cum bubble, you refuse to listen to us and check what we told you. Shit takes 5 mins to check for everything we've told you. Go jump off a fucking bridge and be done with it.

[missionsix010]

Just here to hold your hand when you die fucking *snip* just give up.
if you take a min to read you would see ive already check what you all have said to check fucking *snip*..

[jr_ss]

Originally Posted by missionsix010

Just here to hold your hand when you die fucking *snip* just give up.
if you take a min to read you would see ive already check what you all have said to check fucking *snip*..

Congratulations moron, you just got yourself pinked. Now please, do as suggested and jump off a bridge or drive the car into a tree, idiot.

[SuperBlackS14]

Last thing to do here is disrespect people you ask for help. Have fun with your Pink.

[JKL1031]

Originally Posted by KA-Life86

A alignment

An alignment...

[xoxide]

Dont drive over 60... problem solved.

[Sileighty_85]

Bad Throw Out bearing....

Sarcasm//

[Drifting Kalamari]

Get alignment, rotate balance tires, lift front and grab tie rod and see if they have any give or movement.

[DJ-of-E]

Originally Posted by missionsix010

Just here to hold your hand when you die fucking *snip* just give up.
if you take a min to read you would see ive already check what you all have said to check fucking *snip*..

Maybe we should stop telling people to check because they most likely do not know how to "check" if a part is okay. Kinda reminds me of a kid with an S14 couldn't start his car and I told him to check/replace his start. Kid went off and replaced the clutch switch instead.

[sil80d]

Does it have the same symptoms driving backwards?

[fliprayzin240sx]

Dont think you can go 60mph backwards...

[sil80d]

It would be awesome to watch him try