NOT ANOTHER TURBO THREAD!!!....but seriously i need some imput... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JFoxx · 09-20-2012, 11:29 AM

i picked up a brand new gtx35r. this turbo is going on a built sr22det. the motor will be running e85, and used for track purposes only. these turbos are not sold with the turbine housing, and here lies my dilema. i am looking to make about 550rwhp i want to make this turbo spool as fast as possible.

im leaning towards the t3 .82 AR divided housing

other options available are t3 or t4 1.06 AR divided housing.

im having a hard time finding any kind of comparison results from the different AR's available for this turbo.

does anyone have experience with any of theses setups?

(i did search and could not find what i was looking for)

S@nt0s · 09-20-2012, 12:01 PM

go with the t3 .63 housing
the E85 will take care of the rest of the spooling

Rut Ro · 09-20-2012, 12:04 PM

Just make sure that your ratio of hot side to compressor housing isn't more than 30%. Stick with the T3 .63 or .82 housing.

Croustibat · 09-21-2012, 04:01 AM

Not sure .63 will give 550 whp ... Pretty sure the 1.06 is too big though. That is the kind of A/R you can find on 6/8 cylinders, 3L+ engines.

S@nt0s · 09-21-2012, 07:23 AM

Quote:

Originally Posted by Croustibat

Not sure .63 will give 550 whp ... Pretty sure the 1.06 is too big though. That is the kind of A/R you can find on 6/8 cylinders, 3L+ engines.

im running a 63 A/R, my dad runs a 82 and makes 800
and there are tons of 4bangers running 1.06, 1.19 AR's but those are big HP guys

JFoxx · 09-21-2012, 07:29 AM

Quote:

Originally Posted by S@nt0s

im running a 63 A/R, my dad runs a 82 and makes 800
and there are tons of 4bangers running 1.06, 1.19 AR's but those are big HP guys

how much power are you making on the .63? single scroll correct? when do you hit full boost?

S@nt0s · 09-21-2012, 07:53 AM

Quote:

Originally Posted by JFoxx

how much power are you making on the .63? single scroll correct? when do you hit full boost?

525whp 424ft lbs
i hit 25psi @5700 but pushing it to 33psi to 8100

09-20-2012, 11:29 AM	#1
JFoxx BANNED Join Date: May 2008 Location: SD & OC Posts: 722 Trader Rating: (3) Feedback Score: 3 reviews	NOT ANOTHER TURBO THREAD!!!....but seriously i need some imput... i picked up a brand new gtx35r. this turbo is going on a built sr22det. the motor will be running e85, and used for track purposes only. these turbos are not sold with the turbine housing, and here lies my dilema. i am looking to make about 550rwhp i want to make this turbo spool as fast as possible. im leaning towards the t3 .82 AR divided housing other options available are t3 or t4 1.06 AR divided housing. im having a hard time finding any kind of comparison results from the different AR's available for this turbo. does anyone have experience with any of theses setups? (i did search and could not find what i was looking for)

09-20-2012, 12:01 PM	#2
S@nt0s Zilvia Addict Join Date: Jan 2008 Location: 310 all day! Age: 44 Posts: 912 Trader Rating: (4) Feedback Score: 4 reviews	go with the t3 .63 housing the E85 will take care of the rest of the spooling __________________ MunkyW3rkz Racing

09-20-2012, 12:04 PM	#3
Rut Ro Leaky Injector Join Date: Jun 2010 Location: Colorado Age: 40 Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	Just make sure that your ratio of hot side to compressor housing isn't more than 30%. Stick with the T3 .63 or .82 housing.

09-21-2012, 04:01 AM	#4
Croustibat Nissanaholic! Join Date: Aug 2011 Location: France - Toulouse Age: 44 Posts: 1,851 Trader Rating: (0) Feedback Score: 0 reviews	Not sure .63 will give 550 whp ... Pretty sure the 1.06 is too big though. That is the kind of A/R you can find on 6/8 cylinders, 3L+ engines.