thread pattern for lug nuts? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

XXX4life · 03-18-2004, 11:10 AM

what is the thread pitch for the lug nuts on my 90 240sx? i tried to put some lug nuts from my toyota onto the 240sx and they didn't wanna screw on?
thanks

epoxy_nc · 03-18-2004, 11:32 AM

Quote:

Originally Posted by XXX4life

what is the thread pitch for the lug nuts on my 90 240sx? i tried to put some lug nuts from my toyota onto the 240sx and they didn't wanna screw on?
thanks

i dont know it right off the top of my head... but if you search i'm sure it wont take but a minute!!!!

RBS14 · 03-18-2004, 11:37 AM

12 X 1.25 Same with most nissans i know of.

drift into a curb · 03-18-2004, 12:31 PM

And same as Subarus.

Toyotas are 12x1.5 like Hondas, Mitsu, etc etc.

Ghettokracker71 · 03-22-2004, 03:29 PM

Quote:

Originally Posted by RBS14

12 X 1.25 Same with most nissans i know of.

is that the same on a 1991 ??? I just changed the wheels,but my lugs are to fat and any socket that I try to use to tighten/losen them gets stuck in the little hole...hah hah,I'm looking for a long shaft one,or super small (diameter of the head only) ones....anybody know where I can find them???

mistaanime · 03-22-2004, 04:36 PM

Quote:

Originally Posted by Ghettokracker71

is that the same on a 1991 ???

yes they are the same..so are the 95-98.....

RBS14 · 03-22-2004, 06:32 PM

All nissans are the same thread pitch, except maybe for the new truck and maybe the suv's....

GhettoKracker: are you saying the socket gets stuck in the hole in the wheel? If so, you need a thinwall socket.

Ghettokracker71 · 03-22-2004, 08:41 PM

Quote:

Originally Posted by RBS14

All nissans are the same thread pitch, except maybe for the new truck and maybe the suv's....

GhettoKracker: are you saying the socket gets stuck in the hole in the wheel? If so, you need a thinwall socket.

thats just it,I bought the thinnest one I could find.....maybe I need to keep looking....

....

drift into a curb · 03-22-2004, 09:29 PM

Get some Tuner lug nuts like Muteki, McGard, or Gorilla. As long as your wheels are aftermarket, the lug nuts will work, unless they require a special type of shank lug nut, ie. some Kosei wheels.

Ghettokracker71 · 03-23-2004, 10:17 AM

Quote:

Originally Posted by drift into a curb

Get some Tuner lug nuts like Muteki, McGard, or Gorilla. As long as your wheels are aftermarket, the lug nuts will work, unless they require a special type of shank lug nut, ie. some Kosei wheels.

I've seen them,but I didn't know if there had a smaller head on them or not...thanks,I'll look into them

RBS14 · 03-23-2004, 11:18 AM

^^^
just get them in the right thread pitch, i have em, they rock.

03-18-2004, 11:10 AM	#1
XXX4life Zilvia Member Join Date: Jan 2004 Location: portland, OR Age: 43 Posts: 268 Trader Rating: (0) Feedback Score: 0 reviews	thread pattern for lug nuts? what is the thread pitch for the lug nuts on my 90 240sx? i tried to put some lug nuts from my toyota onto the 240sx and they didn't wanna screw on? thanks __________________ 04 Scion xb 90 240sx (ka24de) www.entrustclothing.com

03-18-2004, 11:37 AM	#3
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	12 X 1.25 Same with most nissans i know of. __________________

03-22-2004, 06:32 PM	#7
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	All nissans are the same thread pitch, except maybe for the new truck and maybe the suv's.... GhettoKracker: are you saying the socket gets stuck in the hole in the wheel? If so, you need a thinwall socket. __________________

03-23-2004, 11:18 AM	#11
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	^^^ just get them in the right thread pitch, i have em, they rock. __________________

03-18-2004, 12:31 PM	#4
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	And same as Subarus. Toyotas are 12x1.5 like Hondas, Mitsu, etc etc.

03-22-2004, 09:29 PM	#9
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	Get some Tuner lug nuts like Muteki, McGard, or Gorilla. As long as your wheels are aftermarket, the lug nuts will work, unless they require a special type of shank lug nut, ie. some Kosei wheels.