S14 diff removal/ drive shaft bolt problems - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ziptietech · 01-29-2013, 09:33 PM

Hey guys I'm trying to remove my differential so I can replace my bushings. So my car is a 96 abs model.

I can't get a box wrench in the nut side because the stud sticks out to far. I have to use an open wrench but they start to round off. Does anyone have any helpful ideas. I thought about buying a boxed wrench and grinding it a little bit and be able to slip between the stud and the diff but don't know.

Some models don't have the studs sticking out so far I think they are the abs models but not sure, the non abs seem to have enough room to put a boxed wrench in with no problem

01-29-2013, 09:33 PM	#1
Ziptietech Zilvia Junkie Join Date: Mar 2012 Location: Carson Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	S14 diff removal/ drive shaft bolt problems Hey guys I'm trying to remove my differential so I can replace my bushings. So my car is a 96 abs model. I can't get a box wrench in the nut side because the stud sticks out to far. I have to use an open wrench but they start to round off. Does anyone have any helpful ideas. I thought about buying a boxed wrench and grinding it a little bit and be able to slip between the stud and the diff but don't know. Some models don't have the studs sticking out so far I think they are the abs models but not sure, the non abs seem to have enough room to put a boxed wrench in with no problem