TX Rear spherical bearings - Z32 rear uprights

[Def]

I have a few sets of these spherical bearings left over. They fit in Z32 rear uprights, and they feature user replaceable bearings.


To review what these are, they take the place of the toe, traction, and camber bushings on a non-HICAS Z32 rear upright. They include a new 1/2" bolt and locking nut. Some arms will need to be slightly clearanced with a 1/2" bit on the upright hole side. This is a standard oversize dimension for a 12 mm hole, so many arms don't need any additional clearancing here.

The amount of material is extremely minimal and does not affect the operation, or preclude you using the arms with stock 12 mm bolts in the future. The 1/2" bolt and nut also use 19 mm wrenches for easy working on the rear in the future with metric tooling.

The sets that are available:



There are 2 sets of RUSB left that are cosmetically good for $325/set shipped and paypal'd.

And there are 2 sets that did not get full cleanup on the misalignment ears. What does that mean and look like, a pic tells it all (it's a slightly darker region of non-machined aluminum):



Essentially it's unmachined aluminum round stock on a small portion of the ear.

The two sets with blemished misalignment ears are $310/set shipped.


Cliffs: 2 sets of clean RUSB, 2 sets with ears that didn't get full cleanup. PM me if interested.

[Def]

Still available.

[Def]

1 clean set, 2 marked ear sets left!