![]() |
|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
S13 standalone harness
Hey been looking around on here and google. But it's hard to word it for a search engine. I've got a s13 engine, trans and a going to swap it into another chassis. I'm just lookin to isolate the engine harness from the rest of the harness. Not worried about guages and all that other junk. Just want a harness I can add acc power to and run the engine. Anyone ever done this or have a diagram/write up to aid me before I rip this harness apart.any help would be apreciated
|
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Post Whore!
![]() |
You want to rewire your engine harness down to the bare minimums?
You can do it a few ways or you can have someone else do it for you. Hit up Jordan from Jordan Innovations if you need it performed somewhere else.
__________________
Like Me on FaceBook ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|