GA OS Giken twin plate (never installed) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tloh · 10-31-2013, 11:48 AM

Price drop: sold
I got this clutch with the car I bought, it's for a redtop s13 Sr. Barely used condition looks like, specs below.

measurements on plates are

OS Giken spec new center plate: 4.5mm
OS Giken spec clutch plates: 4.0mm

centerplate: 4.4
plate 1: 3.80mm
plate 2: 3.77mm

rebuild states 1.5mm for replacement of discs

tloh · 10-31-2013, 04:02 PM

Bump for Halloween and price drop 800 offers are good don't be scared of them.

Sent from my Lumia 710 using Tapatalk

JN1AS4 · 10-31-2013, 06:08 PM

That clutch isn't brand new. Maybe slightly used or rebuilt. But you can clearly see the marks from the throw out bearing left on the pressure plate. GLWS sale though!

double zero · 10-31-2013, 06:21 PM

^^^ what he said!!

tloh · 10-31-2013, 07:50 PM

The guy was 50+yo from the scca meets I go to monthly, so I'm just taking his word for it. He said he never installed it, which is true, but he might not have not got it new, no clue. The clutches don't look used at all though. I'm going to post some pics of it apart tomorrow.

keep in mind it's 800, as I don't really know the true nature of it other than what the machine shop told me and the older gentlemen, which was "it was barely used if any". Also take into consideration that I have seen the same type clutch around here go for 1100 with bad springs. Bump. Thanks for the GLs

*brndck* · 10-31-2013, 11:51 PM

sooooooo perhaps you should do things like take photos of the condition of both the friction discs and the plates.

just saying "well, here it is," isn't gonna get anyone to toss you 8 bills.

given the unknown condition i'd offer you $150 shipped.

tloh · 11-01-2013, 05:58 AM

I literary just said I was putting up new pics today of it apart.

The condition isn't unknown unless a machine shop doesn't know how to look at a clutch. Some of you should really read.

No thanks on the 150 I have 3 offers already for around 600 local pickup.

These clutches go for 900-1100 all the time with them needing rebuilds. This one doesn't need anything.

Not asking anyone to "throw" anything at me, that's rude yo. Bump.

TEALSQUEAL · 11-01-2013, 08:58 AM

I picked up a setup similar to this for $300. Unknown condition multiplate clutches decrease in value heavily when they need a rebuild. I'm sure you paid next to nothing on it thinking you'd make a mint off of some zilvia noob. Be realistic and make a profit not a killing.

tloh · 11-01-2013, 09:09 AM

I didn't pay anything for it came with the car. As i stated already. If you got a real os giken for 300 in barely used condition, that's awesome. Thanks for the reply.

tloh · 11-01-2013, 03:53 PM

this is the worst part so i posted it first, damage is on the side only, tips are undamaged

bump for pics 800 obo

os giken ts-2-bd is the part number

*brndck* · 11-01-2013, 07:53 PM

NOW we're talking.

*fliprayzin240sx* · 11-01-2013, 07:58 PM

Quote:

Originally Posted by tloh

I literary just said I was putting up new pics today of it apart.

The condition isn't unknown unless a machine shop doesn't know how to look at a clutch. Some of you should really read.

No thanks on the 150 I have 3 offers already for around 600 local pickup.

These clutches go for 900-1100 all the time with them needing rebuilds. This one doesn't need anything.

Not asking anyone to "throw" anything at me, that's rude yo. Bump.

Needing rebuild for 900-1100? Bullshit since you can get a new for that much...I got 2 TS2B clutches. Now, you asking for $800 for this is a good price considering rebuild kits for these goes for $700-800. Plates look like they're brand new plates so these are definitely a used clutch with fresh rebuild plates.

These clutch looks like Os Giken TS2BD.

Def · 11-01-2013, 10:17 PM

Quote:

Originally Posted by fliprayzin240sx

Needing rebuild for 900-1100? Bullshit since you can get a new for that much...I got 2 TS2B clutches. Now, you asking for $800 for this is a good price considering rebuild kits for these goes for $700-800. Plates look like they're brand new plates so these are definitely a used clutch with fresh rebuild plates.

These clutch looks like Os Giken TS2BD.

Not to be an ass, but the clutch disks look new, but the floaters definitely look used AND resurfaced (look at the heat marking on the outer location tangs). One thing to watch out for on multi-plate clutches is your stack up height. They are usually only rated to 0.030-0.040" of total wear, so if each floater is resurfaced 0.020", you're already at your wear limit with brand new disks. The flywheel is the same story (needs a set step height).

Most people don't know this, then blame the clutch when they smoke it in 5k miles after a "rebuild" with an insufficient stack height.

Some measurements compared to OS Giken specs will help your sale OP.

tloh · 11-02-2013, 08:00 AM

Quote:

Originally Posted by fliprayzin240sx

Needing rebuild for 900-1100? Bullshit since you can get a new for that much...I got 2 TS2B clutches. Now, you asking for $800 for this is a good price considering rebuild kits for these goes for $700-800. Plates look like they're brand new plates so these are definitely a used clutch with fresh rebuild plates.

These clutch looks like Os Giken TS2BD.

Not a full rebuild but it needed springs and sold for 1100 local pickup. New ones I have seen run 1700 is the cheapest I have seen lately, might be looking in wrong spot though.

The clutch needs alittle tlc but in the end i think whoever gets it will save alot of money in the long run.

Thanks for the measurement idea, i'll try to post some this weekend.

Don't be scared to throw me some offers. The money is just going to be used as Christmas money anyway.

Thanks for all the replys and good morning everybody.

tloh · 11-02-2013, 05:32 PM

Bad news: I'm impatient
Good news: Price drop 750

tloh · 11-02-2013, 08:22 PM

measurements on plates are

OS Giken spec new center plate: 4.5mm
OS Giken spec clutch plates: 4.0mm

centerplate: 4.4
plate 1: 3.80mm
plate 2: 3.77mm

rebuild states 1.5mm for replacement of discs

tloh · 11-03-2013, 09:23 AM

Sunday morning bump.

If you scared, go to church.

hks4life · 11-03-2013, 09:41 AM

free bump, i sold my hks twin disk for around 650 in the same condition!!! i wish i kept it lol and went td06

tloh · 11-03-2013, 05:25 PM

Quote:

Originally Posted by hks4life

free bump, i sold my hks twin disk for around 650 in the same condition!!! i wish i kept it lol and went td06

Yea that's a good price, 700 shipped seems very reasonable for the condition it's in. Shipping cost is killer. :/

tloh · 11-04-2013, 06:23 AM

Case of the Mondays, 700 shipped. Can't go any lower. Save 1100 bucks.

Sent from my Lumia 710 using Tapatalk

S14rb25k · 11-04-2013, 08:53 AM

Is that only for sr20 ??? Or it also fits rb motors ??? Do you have a part #

ghudson · 11-04-2013, 09:17 AM

Its for the sr20 due to the 8 flywheel bolts. An Rb would have 6 bolts...

JSimpson · 11-04-2013, 02:58 PM

this is a damn good deal. very nice clutch!

tloh · 11-04-2013, 03:17 PM

Yes, Os giken is a great drifting clutch and all around clutch really. thanks for the bump. Price drop 600.00 need xmas for my 240

tloh · 11-05-2013, 05:35 PM

Bump

hks4life · 11-08-2013, 10:34 AM

I shipped in a flat rate box. Under 20 bucks

tloh · 11-08-2013, 11:49 AM

600 shipped is low as I will go, its a really good deal. Alot of people wanting it, but none seem to have the money. bump.

tloh · 11-10-2013, 02:35 PM

Sold. Thanks for all the replys

10-31-2013, 11:48 AM	#1
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	OS Giken twin plate (sold) Price drop: sold I got this clutch with the car I bought, it's for a redtop s13 Sr. Barely used condition looks like, specs below. measurements on plates are OS Giken spec new center plate: 4.5mm OS Giken spec clutch plates: 4.0mm centerplate: 4.4 plate 1: 3.80mm plate 2: 3.77mm rebuild states 1.5mm for replacement of discs Last edited by tloh; 11-10-2013 at 02:36 PM..

10-31-2013, 06:21 PM	#4
double zero Zilvia Member Join Date: Sep 2013 Location: madtown Age: 42 Posts: 185 Trader Rating: (0) Feedback Score: 0 reviews	^^^ what he said!! __________________ Iam here for the free ethanol!

11-02-2013, 05:32 PM	#15
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Bad news: I'm impatient Good news: Price drop 750 Last edited by tloh; 11-02-2013 at 08:20 PM..

11-02-2013, 08:22 PM	#16
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	measurements on plates are OS Giken spec new center plate: 4.5mm OS Giken spec clutch plates: 4.0mm centerplate: 4.4 plate 1: 3.80mm plate 2: 3.77mm rebuild states 1.5mm for replacement of discs Last edited by tloh; 11-02-2013 at 08:58 PM..

11-04-2013, 03:17 PM	#24
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Yes, Os giken is a great drifting clutch and all around clutch really. thanks for the bump. Price drop 600.00 need xmas for my 240 Last edited by tloh; 11-04-2013 at 07:19 PM..

10-31-2013, 04:02 PM	#2
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Bump for Halloween and price drop 800 offers are good don't be scared of them. Sent from my Lumia 710 using Tapatalk

10-31-2013, 06:08 PM	#3
JN1AS4 Zilvia Member Join Date: Dec 2009 Location: GA Posts: 291 Trader Rating: (1) Feedback Score: 1 reviews	That clutch isn't brand new. Maybe slightly used or rebuilt. But you can clearly see the marks from the throw out bearing left on the pressure plate. GLWS sale though!

10-31-2013, 07:50 PM	#5
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	The guy was 50+yo from the scca meets I go to monthly, so I'm just taking his word for it. He said he never installed it, which is true, but he might not have not got it new, no clue. The clutches don't look used at all though. I'm going to post some pics of it apart tomorrow. keep in mind it's 800, as I don't really know the true nature of it other than what the machine shop told me and the older gentlemen, which was "it was barely used if any". Also take into consideration that I have seen the same type clutch around here go for 1100 with bad springs. Bump. Thanks for the GLs

11-01-2013, 05:58 AM	#7
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	I literary just said I was putting up new pics today of it apart. The condition isn't unknown unless a machine shop doesn't know how to look at a clutch. Some of you should really read. No thanks on the 150 I have 3 offers already for around 600 local pickup. These clutches go for 900-1100 all the time with them needing rebuilds. This one doesn't need anything. Not asking anyone to "throw" anything at me, that's rude yo. Bump.

11-01-2013, 08:58 AM	#8
TEALSQUEAL Zilvia Junkie Join Date: Apr 2004 Location: louisville, ky Posts: 482 Trader Rating: (6) Feedback Score: 6 reviews	I picked up a setup similar to this for $300. Unknown condition multiplate clutches decrease in value heavily when they need a rebuild. I'm sure you paid next to nothing on it thinking you'd make a mint off of some zilvia noob. Be realistic and make a profit not a killing.

11-01-2013, 09:09 AM	#9
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	I didn't pay anything for it came with the car. As i stated already. If you got a real os giken for 300 in barely used condition, that's awesome. Thanks for the reply.

11-01-2013, 03:53 PM	#10
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	this is the worst part so i posted it first, damage is on the side only, tips are undamaged bump for pics 800 obo os giken ts-2-bd is the part number

11-03-2013, 09:23 AM	#17
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Sunday morning bump. If you scared, go to church.

11-03-2013, 09:41 AM	#18
hks4life Zilvia Addict Join Date: Sep 2007 Location: GEORGIA Posts: 637 Trader Rating: (2) Feedback Score: 2 reviews	free bump, i sold my hks twin disk for around 650 in the same condition!!! i wish i kept it lol and went td06

11-04-2013, 06:23 AM	#20
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Case of the Mondays, 700 shipped. Can't go any lower. Save 1100 bucks. Sent from my Lumia 710 using Tapatalk

11-04-2013, 08:53 AM	#21
S14rb25k BANNED Join Date: Jun 2013 Location: Florida Age: 38 Posts: 129 Trader Rating: (0) Feedback Score: 0 reviews	Is that only for sr20 ??? Or it also fits rb motors ??? Do you have a part #

11-04-2013, 09:17 AM	#22
ghudson Zilvia Member Join Date: Nov 2009 Location: Mount Pleasant, SC Age: 33 Posts: 272 Trader Rating: (13) Feedback Score: 13 reviews	Its for the sr20 due to the 8 flywheel bolts. An Rb would have 6 bolts...

11-04-2013, 02:58 PM	#23
JSimpson Banned from the Marketplace Join Date: Nov 2009 Location: Indiana Posts: 1,009 Trader Rating: (15) Feedback Score: 15 reviews	this is a damn good deal. very nice clutch!

11-05-2013, 05:35 PM	#25
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Bump

11-08-2013, 10:34 AM	#26
hks4life Zilvia Addict Join Date: Sep 2007 Location: GEORGIA Posts: 637 Trader Rating: (2) Feedback Score: 2 reviews	I shipped in a flat rate box. Under 20 bucks

11-08-2013, 11:49 AM	#27
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	600 shipped is low as I will go, its a really good deal. Alot of people wanting it, but none seem to have the money. bump.

11-10-2013, 02:35 PM	#28
tloh Leaky Injector Join Date: Jun 2013 Location: columbus ga Age: 40 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	Sold. Thanks for all the replys