AZ RB26 S14 240sx PART OUT! Lots of good parts!

[BrownDogg]

RB26 S14 240sx PART OUT! Lots of good parts!

The time has finally come to part out my S14 Nissan 240sx. Let me know what you would like! My contact information is below

I can bundle parts together if you are interested in multiple parts. Make an offer on what you would like.

Injector Dynamics 1000cc injectors: SOLD

Splitfire RB coilpacks: SOLD

Haltech Platinum Pro 2000 standalone engine management system: $2000
comes with MAP sensor, flying lead harness good for literally any car, includes Haltech wideband O2


Power FC D-Jetro for an RB26 with Map Sensor: SOLD


RB26 OEM Complete engine harness: SOLD


Competition Stage 5 RB Clutch: SOLD


McKinney RB Install kit: SOLD


S14 RB driveshaft. Brand new: SOLD


RB25 5 Speed Transmission: SOLD


RB26 Motorset: SOLD
includes, ARP head studs, greddy timing belt, CP pistons, RB25 oil pan, new head gasket and entire gasket rebuild kit.
polished valve covers, coil pack cover, and GTR engine plate, etc

Stance GR+ Pro S14 coilovers and Z32 rear aluminum uprights: SOLD

K sport rear toe arms: $150


Powertrick Rear Upper Control Arms: $200


Nismo front lower control arms: $100
Plus stock

Turbo smart e-Boost Street electronic Boost controller: $300


OEM RB Coil Packs: $150

RB Cam Angle Sensor : $50

RB26 Twin Scroll tubular T4 divided housing manifold: SOLD

3" v band rb downpipe: SOLD

4" intercooler from Intense power with custom 3" intercooler piping: $400

Precision 6262 T4 divided housing, v band turbo: SOLD

Turbo Smart Hyper Gate 45mm wastegate: SOLD

Turbo Smart Race Port Blow Off valve: $300



Isis short shifter: SOLD

Top Feed Fuel Rail: SOLD

RB pulley kit: SOLD

Koyo ka24 Radiator: SOLD

Electric Fans: SOLD


Varrstoen ES2 wheels: $1500
18x9.5 et 0 and 18x10.5 et 0
Federal RSR 255/35/18 fronts
Federal RSR 265/35/18 rears
Wheels and tires have been driven about 5 miles total. basically new


Sparco Evo Racing Seats, two of them: $1000
comes with bride rails, G Force Racing 5 Point harnesses

I have a royal ton of AN fittings as well. -10, -8, -6, push lock and hose end fittings. I dont have a need for any of them.

Aeromotive Fuel Pressure Regular with marshal gauge: SOLD

Suspicious Garage stainless braided Power Steering lines: $160


Suspicious Garage steel braided brake line kit: $180


Suspicious Garage steel braided clutch line: $50

Brake Master Cylinder with brake lines on opposite side: SOLD

12 Row Oil Cooler: $60
-10 fittings on it


12 Row Power Steering cooler: $60
-10 fittings on it


Aluminum power steering reservoir with male AN fittings on it: $60
-6 feed and -10 drain


2qt Accusump with brackets, ball valve for on/off, and 1 way check valve: $250


Rotora Big Brake Kit: $1500




Z32 Rear Brakes, rotors + calipers: SOLD

Future Fab “Dangle” front knuckles for wide angle: SOLD

5 lug setup: $300 + your stock

S14 titanium 3” exhaust: $250


16 Gallon Fuel Cell: $250


XS 80 gph fuel pump with aeromotive pre and after filters: $200


Ksport hydraulic handbrake setup, fittings, lines: SOLD

Nissan S14 240sx Shell: $5000
Caged, tubed, tubbed, solid subframe bushings, rear firewall, etc






Carbon Fiber Wing: $800

Feel free to call or text me: (949) 922-7937 Text is preferred!!!