WA Fs: Ae86 caged and race prepped chassis. Price lowered to sell asap. $1700 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tubedae86 · 10-01-2013, 08:47 PM

Located in Kennewick, WA
Needs A LOT of fabrication still.
Needs quite a bit of fiberglass work.
Needs quite a bit of body work.
By buying this car you understand that it is a project and you will have a lot of work.

Yes, I have the title to the vehicle.

The car is currently in sealer, some was brushed on as recommended, the rest was sprayed. Fuel Cell has already been cut out. Has been stitch welded as well as the windows and doors were spot welded. The cage has been tig welded, although there are a few spots that needs to be finished. Most the fiberglass panels need fiberglass work. Its lower 4 link mounts have been replaced and custom 4 links will be needed, the pan-hard mount was also removed with intention on going with the double wishbone.

I have had three people give me down payments and back out because they could not get shipping taken care of on their end. So show up with an enclosed trailer and we can strap the vehicle on the dollies and roll it on in with some friends.

I am selling because I am trying to consolidate all the things in my life.... Since I work seven days a week most weeks I don't have time to work on it, even though I have the money and parts to get more done. I have lost my little sister in the last year and I have realized I have a lot of things I want to do with my life and finishing this isn't on the top of my list. Im solely trying to consolidate the things in life, to accomplish the things I want to.

WHAT YOU SEE IS WHAT YOU GET.

Here are some questions that I get asked on almost the daily, so i will answer them for you.

NO, I will not finish it for you and sell it to you.
NO, I will not part out anything unless the chassis is sold first.
NO, I will not part ANYTHING off of it separate.
NO, I do no have additional parts to make it rolling.
NO, I do not have time to help you work on it.

DO NOT ASK ME MY BOTTOM DOLLAR THEN INSIST ON TRYING TO LOW BALL ME... I WILL LITERALLY TELL YOU TO FUCK OFF. The price I am posting is my bottom dollar. If you want it and cannot understand the price that is being asked, then you shouldn't be buying this car anyways. Many of the older guys on this forum know me and know I have been around a while... Im not a bullshitter, so please don't bullshit me.

Here are the prices, NOTHING LOWER:
Metal only, 1/4 panel windows, caged non rolling chassis, NO FIBERGLASS PANELS: $1200
Vehicle with panels, complete with everything in the pictures: $1700
Fiberglass panels only: $600 (only if chassis sells)
Kouki Rear Bumper: $200 (only if chassis sells)
Only serious inquiries please, I don't get on here too much anymore so please text instead. 509-521-7037

s13&ae86love · 10-02-2013, 05:05 AM

.................. 1,500

Fitted · 10-02-2013, 09:36 AM

Damn! I would love this, if it didn't cost almost 1,000 to deliver it :/

Zip_Tyte · 10-02-2013, 05:40 PM

Bump for a great guy and a steal of a deal.

tubedae86 · 10-02-2013, 06:29 PM

Price is firm as specified. Even at a $1000 for shipping, its still a deal! I cannot go any lower on price. If you can buy it and pick it up in a week, ill take 1600 just because i can not pay for storage of the vehicle. Other than that, price stays.

tubedae86 · 11-12-2013, 07:09 PM

Still getting a lot of people interested from all around the US. No one has picked it up yet. Wont find a better price on something similar.

mogli9000 · 11-14-2013, 07:04 AM

Sick car. Just wished the 86 suspension wasn't so outdated and limited.

lounah · 11-14-2013, 10:20 AM

Danggggggggg. So hard to find these where I'm at. Good luck

Sent from my LG-P659 using Tapatalk

tubedae86 · 11-14-2013, 05:09 PM

hence why the rearend was made to fit either a 240sx Suspension or a custom double wishbone.

Baby_Killer · 11-15-2013, 03:40 PM

So this does not come with driver and passenger doors?

10-01-2013, 08:47 PM	#1
tubedae86 Zilvia Member Join Date: Feb 2005 Location: Tri-cities Posts: 230 Trader Rating: (0) Feedback Score: 0 reviews	Fs: Ae86 caged and race prepped chassis. Price lowered to sell asap. $1700 Located in Kennewick, WA Needs A LOT of fabrication still. Needs quite a bit of fiberglass work. Needs quite a bit of body work. By buying this car you understand that it is a project and you will have a lot of work. Yes, I have the title to the vehicle. The car is currently in sealer, some was brushed on as recommended, the rest was sprayed. Fuel Cell has already been cut out. Has been stitch welded as well as the windows and doors were spot welded. The cage has been tig welded, although there are a few spots that needs to be finished. Most the fiberglass panels need fiberglass work. Its lower 4 link mounts have been replaced and custom 4 links will be needed, the pan-hard mount was also removed with intention on going with the double wishbone. I have had three people give me down payments and back out because they could not get shipping taken care of on their end. So show up with an enclosed trailer and we can strap the vehicle on the dollies and roll it on in with some friends. I am selling because I am trying to consolidate all the things in my life.... Since I work seven days a week most weeks I don't have time to work on it, even though I have the money and parts to get more done. I have lost my little sister in the last year and I have realized I have a lot of things I want to do with my life and finishing this isn't on the top of my list. Im solely trying to consolidate the things in life, to accomplish the things I want to. WHAT YOU SEE IS WHAT YOU GET. Here are some questions that I get asked on almost the daily, so i will answer them for you. NO, I will not finish it for you and sell it to you. NO, I will not part out anything unless the chassis is sold first. NO, I will not part ANYTHING off of it separate. NO, I do no have additional parts to make it rolling. NO, I do not have time to help you work on it. DO NOT ASK ME MY BOTTOM DOLLAR THEN INSIST ON TRYING TO LOW BALL ME... I WILL LITERALLY TELL YOU TO FUCK OFF. The price I am posting is my bottom dollar. If you want it and cannot understand the price that is being asked, then you shouldn't be buying this car anyways. Many of the older guys on this forum know me and know I have been around a while... Im not a bullshitter, so please don't bullshit me. Here are the prices, NOTHING LOWER: Metal only, 1/4 panel windows, caged non rolling chassis, NO FIBERGLASS PANELS: $1200 Vehicle with panels, complete with everything in the pictures: $1700 Fiberglass panels only: $600 (only if chassis sells) Kouki Rear Bumper: $200 (only if chassis sells) Only serious inquiries please, I don't get on here too much anymore so please text instead. 509-521-7037

10-02-2013, 05:05 AM	#2
s13&ae86love Leaky Injector Join Date: Jan 2012 Location: new jersey Age: 35 Posts: 118 Trader Rating: (2) Feedback Score: 2 reviews	.................. 1,500 __________________ YOTA LOVE! Last edited by s13&ae86love; 10-02-2013 at 05:38 AM..

10-02-2013, 09:36 AM	#3
Fitted Zilvia Junkie Join Date: Jul 2010 Location: Northern Cali Posts: 422 Trader Rating: (5) Feedback Score: 5 reviews	Damn! I would love this, if it didn't cost almost 1,000 to deliver it :/

10-02-2013, 05:40 PM	#4
Zip_Tyte Leaky Injector Join Date: Jan 2009 Location: Olympia WA Age: 38 Posts: 142 Trader Rating: (0) Feedback Score: 0 reviews	Bump for a great guy and a steal of a deal.

10-02-2013, 06:29 PM	#5
tubedae86 Zilvia Member Join Date: Feb 2005 Location: Tri-cities Posts: 230 Trader Rating: (0) Feedback Score: 0 reviews	Price is firm as specified. Even at a $1000 for shipping, its still a deal! I cannot go any lower on price. If you can buy it and pick it up in a week, ill take 1600 just because i can not pay for storage of the vehicle. Other than that, price stays.

11-12-2013, 07:09 PM	#6
tubedae86 Zilvia Member Join Date: Feb 2005 Location: Tri-cities Posts: 230 Trader Rating: (0) Feedback Score: 0 reviews	Still getting a lot of people interested from all around the US. No one has picked it up yet. Wont find a better price on something similar.

11-14-2013, 07:04 AM	#7
mogli9000 Nissanaholic! Join Date: Mar 2012 Location: Slums of Shaolin Age: 31 Posts: 1,811 Trader Rating: (68) Feedback Score: 68 reviews	Sick car. Just wished the 86 suspension wasn't so outdated and limited.

11-14-2013, 10:20 AM	#8
lounah Join Date: Nov 2013 Location: pensacola Age: 30 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Danggggggggg. So hard to find these where I'm at. Good luck Sent from my LG-P659 using Tapatalk

11-14-2013, 05:09 PM	#9
tubedae86 Zilvia Member Join Date: Feb 2005 Location: Tri-cities Posts: 230 Trader Rating: (0) Feedback Score: 0 reviews	hence why the rearend was made to fit either a 240sx Suspension or a custom double wishbone.

11-15-2013, 03:40 PM	#10
Baby_Killer Join Date: Jan 2011 Location: Colorado Springs Age: 40 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	So this does not come with driver and passenger doors?