MD Z31 brackets and Altima Rotor rear BBK conversion (bolt-on)

[RalliartRsX]

Hello all

This has been a very nice BBK upgrade for the rear of the S13/S14 chassis. This is a direct bolt on kit and the rotors are brand new! Only mounted but never driven on (the marks on the rotor is for test fitting and placing the car in first gear while on jack stands to check clearance).

Rotors:
The rotors themselves are brand new. The Center portion and bolts holes give it away as brand new

Brackets (Z31 87 NA. The correct bracket with the bigger opening for the rotor and no pad overhang):
The brackets are already machined for centering the Rotor on a S14 chassis. Includes all bolts and hardware. Brackets were painted with high temp black paint

You reuse your stock everything else/hardware (the stock calipers bolt to this bracket directly, the pad brackets/holders, everything!).

Price is $150 shipped (or pickup in MD for cheaper). This is one of the cheapest most effective rear BBK you will find. And good luck finding the correct brackets. Also, you do not have to remove the upright or anything or mess with parking cables like the 300ZX setup

Thanks much!

Rotor/brackets/hardware


Bracket


Machines portion of brackets


Other bracket


Other machined potion


Rotors (you can still see the brand new "shine")


Interior/hub portion of rotor to show that they are new


Another of the inner portion


Another of the rotor

[RalliartRsX]

Bump!!!!!!!!

[RalliartRsX]

Bump!!!!!!!!

[RalliartRsX]

UP to the top for a nice BBK!

[TheRealSy90]

Wish it was four lug!

[RalliartRsX]

.......Redrill the rotors. Cost you about $20 total!

[RalliartRsX]

Bump it up to the top!

[RalliartRsX]

FInal bump before new thread