FL Built KA24de Motor plus more!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

crash33 · 02-16-2014, 03:27 PM

Alright so I am looking to move at the end of march so here are the final parts that I have left that need to go. I just need this stuff GONE!!!! No prices BEST REASONABLE OFFER GETS IT. I am very flexible on the price money in the pocket is easier to move than a motor. lol

IMPORTATN NOTE: PLEASE READ ALL THE INFORMATION IN THIS POST. DO NOT TEXT ME AND ASK (WHAT PARTS ARE IN THE MOTOR? HOW MUCH DO U WANT FOR THIS PART? ARE YOU WILLING TO PART OUT THE PISTIONS? WHAT IS YOUR LOWEST PRICE? CAN YOU SEND ME PICS?). DO NOT TRY AND LOW BALL ME. I HAVE A LIMITED TIME TO SELL THESE PARTS BECAUSE IT WILL BE DIFFICULT FOR ME TO SELL THEM AFTER I MOVE. I DO NOT WANT TO WASTE YOUR TIME OR MINE. THE PRICES ARE LISTED, MAKE AN OFFER AND WE CAN NEGOIATE A PRICE. I AM NOT TRYING TO BE RUDE BUT I HAVE GOTTEN SO MANY LOW BALL OFFERS AND STUPID QUESTIONS. IF U WANT THE PART LET ME KNOW AND MAKE AN OFFER. PEOPLE WHO HAVE BOUGHT FROM ME GET WHAT THEY PAY FOR. I DO NOT LIKE GETTING PLAYED AND I'M SURE YOU GUYS DONT EITHER SO I AM FARE AND TRY TO LIST ALL INFO SO THIS WAY YOU GUYS CAN BUY WITH CONFIDENCE. WHY WOULD I TAKE TIME TO TYPE THIS IF I DIDN'T MEAN IT?

Built KA motor (WILL NOT PART OUT)
Block and head have been machined (decked, magna fluxed, pressure tested, honed)
all new celvite bearings
all gaskets replaced with felpro
Forged CP 9.0-1cr pistons
stock rods
all ARP HARDWARE (mains, rods, and head)
OIL PAN with turbo drain
Rebuilt oil pump with genuine Nissan OEM gears.
Motor has less than 500miles the head gasket didn't seal (I repeat DID NOT SEAL DIFFERENT THAN BLOWN) so that is the only issue. IT DOES RUN just puffs white smoke. Price is OBO (no shipping) (SOLD)

5 Speed transmission s13
No major issues with it would recommend a flush and refilling with redline mt90 for best performance OBO (SOLD)

5 speed stock drive shaft s13
No major issues. OBO (SOLD)

White bunny clutch setup (WILL NOT PART OUT)
z31 southbend street clutch rated for 350ftlbs on a vg30 with the reduced weight of the ka it is probably closer to 400ftlbs. it uses a d21 flywheel. It still has plenty of meat left on it. I would recommend a resurface of the wheel but it may not be necessary. price OBO will ship

Custom Nissan tach!!!!
This is brand new never used custom made tachometer. The brand is speedhut they are very well know in the domestic car world. Great bulid quality and it comes with a lifetime warranty on the internal electric components. OBO will ship

Autometer fully programmable fuel level gauge brand new never used. I bought it second hand so it does not come with the original box but the harness is uncut and never been used. retails for 200+ price OBO will ship

JGS 40mm wastegate. Worked just fine on my setup comes with 14psi spring. OBO will ship (SOLD)

1g dsm BOV. great little BOV for the money can easily hold 14+spi stock. (sold)

Large Front mount intercooler. CX racing brand a little beat up but still functional. OBO will ship (SOLD)

I really need this stuff gone because I could use the money for the move.

Thanks for looking and pics will be posted in the next post

please PM ME OR TEXT ME AT 352-316-6826

crash33 · 02-16-2014, 03:27 PM

crash33 · 02-16-2014, 03:28 PM

crash33 · 02-21-2014, 08:46 AM

Bump need this stuff gone.

crash33 · 02-23-2014, 10:52 AM

Transmission and driveshaft sold. still plenty of parts left.

crash33 · 02-28-2014, 10:29 PM

Alright so I have a moving date of 4/4/14 so this stuff needs to go in the next month. Shoot me and offer on this stuff I'm flexible on the prices because I just need this stuff gone.

thanks

inRot8ion · 03-01-2014, 12:24 AM

Price for whatevers left in the bundle? And is that $200 for the shipping of te motor bundle?

crash33 · 03-05-2014, 10:49 AM

I am not shipping the motor sorry. The smaller items like the gauges, clutch and flywheel, wastegate I would.

crash33 · 03-09-2014, 09:36 AM

Bump 3 weeks left before I move need this stuff gone. I'm flexible on prices.

Rpalm240sx · 03-09-2014, 09:48 AM

What state do you live in? I'm in ohio. Seeing if it would be worth driving to get motor

crash33 · 03-10-2014, 10:10 PM

It would be a hell of a drive I'm in FL. Less than three weeks before I move. Again I am VERY flexible on prices I just need this gone please not looking to make a huge profit.

crash33 · 03-16-2014, 06:35 PM

Ok roughly two weeks before I move I need this stuff gone. Hell if ya come with a couple hundred bucks you can have the motor and any of my spare KA parts at NO EXTRA COST. I am cutting my losses and just need to get rid of this stuff so I am very flexible on price so send me any REASONABLE offer.

thanks

crash33 · 03-23-2014, 11:10 PM

OK motor, intercooler, and wastegate are sold. I have less than two weeks before I move so Turbo, gauges, and clutch\flywheel setup are still available.

crash33 · 03-27-2014, 11:52 AM

I have one week before I move turbo, gauges and clutch\flywheel setup are still available. Make me an offer.

02-16-2014, 03:27 PM	#1
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Built KA24de Motor plus more (no listed prices BO gets it) Alright so I am looking to move at the end of march so here are the final parts that I have left that need to go. I just need this stuff GONE!!!! No prices BEST REASONABLE OFFER GETS IT. I am very flexible on the price money in the pocket is easier to move than a motor. lol IMPORTATN NOTE: PLEASE READ ALL THE INFORMATION IN THIS POST. DO NOT TEXT ME AND ASK (WHAT PARTS ARE IN THE MOTOR? HOW MUCH DO U WANT FOR THIS PART? ARE YOU WILLING TO PART OUT THE PISTIONS? WHAT IS YOUR LOWEST PRICE? CAN YOU SEND ME PICS?). DO NOT TRY AND LOW BALL ME. I HAVE A LIMITED TIME TO SELL THESE PARTS BECAUSE IT WILL BE DIFFICULT FOR ME TO SELL THEM AFTER I MOVE. I DO NOT WANT TO WASTE YOUR TIME OR MINE. THE PRICES ARE LISTED, MAKE AN OFFER AND WE CAN NEGOIATE A PRICE. I AM NOT TRYING TO BE RUDE BUT I HAVE GOTTEN SO MANY LOW BALL OFFERS AND STUPID QUESTIONS. IF U WANT THE PART LET ME KNOW AND MAKE AN OFFER. PEOPLE WHO HAVE BOUGHT FROM ME GET WHAT THEY PAY FOR. I DO NOT LIKE GETTING PLAYED AND I'M SURE YOU GUYS DONT EITHER SO I AM FARE AND TRY TO LIST ALL INFO SO THIS WAY YOU GUYS CAN BUY WITH CONFIDENCE. WHY WOULD I TAKE TIME TO TYPE THIS IF I DIDN'T MEAN IT? Built KA motor (WILL NOT PART OUT) Block and head have been machined (decked, magna fluxed, pressure tested, honed) all new celvite bearings all gaskets replaced with felpro Forged CP 9.0-1cr pistons stock rods all ARP HARDWARE (mains, rods, and head) OIL PAN with turbo drain Rebuilt oil pump with genuine Nissan OEM gears. Motor has less than 500miles the head gasket didn't seal (I repeat DID NOT SEAL DIFFERENT THAN BLOWN) so that is the only issue. IT DOES RUN just puffs white smoke. Price is OBO (no shipping) (SOLD) 5 Speed transmission s13 No major issues with it would recommend a flush and refilling with redline mt90 for best performance OBO (SOLD) 5 speed stock drive shaft s13 No major issues. OBO (SOLD) White bunny clutch setup (WILL NOT PART OUT) z31 southbend street clutch rated for 350ftlbs on a vg30 with the reduced weight of the ka it is probably closer to 400ftlbs. it uses a d21 flywheel. It still has plenty of meat left on it. I would recommend a resurface of the wheel but it may not be necessary. price OBO will ship Custom Nissan tach!!!! This is brand new never used custom made tachometer. The brand is speedhut they are very well know in the domestic car world. Great bulid quality and it comes with a lifetime warranty on the internal electric components. OBO will ship Autometer fully programmable fuel level gauge brand new never used. I bought it second hand so it does not come with the original box but the harness is uncut and never been used. retails for 200+ price OBO will ship JGS 40mm wastegate. Worked just fine on my setup comes with 14psi spring. OBO will ship (SOLD) 1g dsm BOV. great little BOV for the money can easily hold 14+spi stock. (sold) Large Front mount intercooler. CX racing brand a little beat up but still functional. OBO will ship (SOLD) I really need this stuff gone because I could use the money for the move. Thanks for looking and pics will be posted in the next post please PM ME OR TEXT ME AT 352-316-6826 Last edited by crash33; 03-23-2014 at 11:09 PM..

03-09-2014, 09:48 AM	#10
Rpalm240sx Join Date: Dec 2013 Location: Columbus ohio Age: 31 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	What state do you live in? I'm in ohio. Seeing if it would be worth driving to get motor __________________ 92 sr20det red top hatch

02-16-2014, 03:28 PM	#3
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews

02-21-2014, 08:46 AM	#4
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Bump need this stuff gone.

02-23-2014, 10:52 AM	#5
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Transmission and driveshaft sold. still plenty of parts left.

02-28-2014, 10:29 PM	#6
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Alright so I have a moving date of 4/4/14 so this stuff needs to go in the next month. Shoot me and offer on this stuff I'm flexible on the prices because I just need this stuff gone. thanks

03-01-2014, 12:24 AM	#7
inRot8ion Leaky Injector Join Date: Dec 2010 Location: Bay Area, Cali Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	Price for whatevers left in the bundle? And is that $200 for the shipping of te motor bundle?

03-05-2014, 10:49 AM	#8
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	I am not shipping the motor sorry. The smaller items like the gauges, clutch and flywheel, wastegate I would.

03-09-2014, 09:36 AM	#9
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Bump 3 weeks left before I move need this stuff gone. I'm flexible on prices.

03-10-2014, 10:10 PM	#11
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	It would be a hell of a drive I'm in FL. Less than three weeks before I move. Again I am VERY flexible on prices I just need this gone please not looking to make a huge profit.

03-16-2014, 06:35 PM	#12
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	Ok roughly two weeks before I move I need this stuff gone. Hell if ya come with a couple hundred bucks you can have the motor and any of my spare KA parts at NO EXTRA COST. I am cutting my losses and just need to get rid of this stuff so I am very flexible on price so send me any REASONABLE offer. thanks

03-23-2014, 11:10 PM	#13
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	OK motor, intercooler, and wastegate are sold. I have less than two weeks before I move so Turbo, gauges, and clutch\flywheel setup are still available.

03-27-2014, 11:52 AM	#14
crash33 Leaky Injector Join Date: Jan 2010 Location: fl Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	I have one week before I move turbo, gauges and clutch\flywheel setup are still available. Make me an offer.