IA Built s14 sr20det nearly full swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

QuickSpoolSR · 03-12-2015, 04:39 PM

NEW PRICE $2000 shipped to continental US

The bad: has a top end noise, the shop it's at told me it's the lifters, I'm just done dealing with this engine.

History: was stock drove it for about a year, spun a bearing having it tuned, was rebuilt with bc rods cp Pistons, bc 264/264 cams, acl bearings, it drove for 1300 miles and spun a bearing again, just got done having it rebuilt again, some new parts, currently has under a mile on it. full list of parts:

S14 zenki sr20det engine and trans
All sensors, all accessories, coil packs, igniter, ratty harness but works
Cp Pistons
Bc rods
New remanufactured stock crank with matched acl bearings as close to stock clearance as possible
New bc valves, new valve guides and seals
Bc 264/264 cams
Brand New dynatec lifters(supposedly bad)
Bc springs and ti retainers
New Apexi head gasket
New oem oil pump
New timing chain full kit
New gaskets where applicable
five-o 750cc injectors
Spec street flywheel

Will not come with turbo or exhaust manifold, clutch, or ecu

By disconnecting the coil packs one by one the sound does not go away, which is another good sign that it's not a bearing, also the oil is immaculate no metal or anything, it runs and drives, I drove it around the block, I just don't think it sounds right and I don't trust it. The car is located at a shop in Des Moines Iowa if you would like to hear it in person I will post a link to a video of it running.
I'm sure there are gear heads on here who can probably get this thing running like a top.

Call or text preferred
515-249-5146
John

QuickSpoolSR · 03-12-2015, 05:08 PM

http://youtu.be/puGSJL6Nebg

QuickSpoolSR · 03-13-2015, 11:05 AM

Also forgot to mention the vtc was eliminated it has s13 cams and gears

QuickSpoolSR · 03-16-2015, 09:47 AM

Price drop $2500

QuickSpoolSR · 03-19-2015, 04:04 PM

Buyer flaked, price drop $2,400...

QuickSpoolSR · 03-19-2015, 04:05 PM

Will include apexi power fc tuned to this setup for an even $3k

QuickSpoolSR · 03-22-2015, 05:12 PM

$2300 cant believe there isn't more interest

QuickSpoolSR · 03-24-2015, 03:28 PM

$2200 price drop I'm $650 under stock swap price lol

5280VertDET · 03-24-2015, 03:32 PM

Wow. Someone needs a deal. Come on people.

QuickSpoolSR · 03-25-2015, 09:27 AM

$2,100 bump, this is as low as I'm gunna go before I just part it

5280VertDET · 03-25-2015, 10:32 AM

Throw it on ebay, for BIN at 2300. Someone will buy it if you can get a freighter to ship easily.

QuickSpoolSR · 03-25-2015, 05:32 PM

Will do thanks for the tip

QuickSpoolSR · 04-06-2015, 10:06 AM

$2000 shipped #fuckit this week only

03-12-2015, 04:39 PM	#1
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Built s14 sr20det nearly full swap NEW PRICE $2000 shipped to continental US The bad: has a top end noise, the shop it's at told me it's the lifters, I'm just done dealing with this engine. History: was stock drove it for about a year, spun a bearing having it tuned, was rebuilt with bc rods cp Pistons, bc 264/264 cams, acl bearings, it drove for 1300 miles and spun a bearing again, just got done having it rebuilt again, some new parts, currently has under a mile on it. full list of parts: S14 zenki sr20det engine and trans All sensors, all accessories, coil packs, igniter, ratty harness but works Cp Pistons Bc rods New remanufactured stock crank with matched acl bearings as close to stock clearance as possible New bc valves, new valve guides and seals Bc 264/264 cams Brand New dynatec lifters(supposedly bad) Bc springs and ti retainers New Apexi head gasket New oem oil pump New timing chain full kit New gaskets where applicable five-o 750cc injectors Spec street flywheel Will not come with turbo or exhaust manifold, clutch, or ecu By disconnecting the coil packs one by one the sound does not go away, which is another good sign that it's not a bearing, also the oil is immaculate no metal or anything, it runs and drives, I drove it around the block, I just don't think it sounds right and I don't trust it. The car is located at a shop in Des Moines Iowa if you would like to hear it in person I will post a link to a video of it running. I'm sure there are gear heads on here who can probably get this thing running like a top. Call or text preferred 515-249-5146 John __________________ Last edited by QuickSpoolSR; 04-06-2015 at 10:07 AM..

03-12-2015, 05:08 PM	#2
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	http://youtu.be/puGSJL6Nebg __________________

03-13-2015, 11:05 AM	#3
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Also forgot to mention the vtc was eliminated it has s13 cams and gears __________________

03-16-2015, 09:47 AM	#4
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Price drop $2500 __________________

03-19-2015, 04:04 PM	#5
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Buyer flaked, price drop $2,400... __________________

03-19-2015, 04:05 PM	#6
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Will include apexi power fc tuned to this setup for an even $3k __________________

03-22-2015, 05:12 PM	#7
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	$2300 cant believe there isn't more interest __________________

03-24-2015, 03:28 PM	#8
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	$2200 price drop I'm $650 under stock swap price lol __________________

03-24-2015, 03:32 PM	#9
5280VertDET Nissanaholic! Join Date: Aug 2013 Location: Denver Age: 41 Posts: 2,052 Trader Rating: (14) Feedback Score: 14 reviews	Wow. Someone needs a deal. Come on people. __________________ S13 Vert \| SR \| PE1420 \| 5-Speed \| 15x9.5 - 0 \|

03-25-2015, 09:27 AM	#10
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	$2,100 bump, this is as low as I'm gunna go before I just part it __________________

03-25-2015, 10:32 AM	#11
5280VertDET Nissanaholic! Join Date: Aug 2013 Location: Denver Age: 41 Posts: 2,052 Trader Rating: (14) Feedback Score: 14 reviews	Throw it on ebay, for BIN at 2300. Someone will buy it if you can get a freighter to ship easily. __________________ S13 Vert \| SR \| PE1420 \| 5-Speed \| 15x9.5 - 0 \|

03-25-2015, 05:32 PM	#12
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	Will do thanks for the tip __________________

04-06-2015, 10:06 AM	#13
QuickSpoolSR Zilvia Addict Join Date: Jul 2008 Location: des moines IA Age: 37 Posts: 756 Trader Rating: (8) Feedback Score: 8 reviews	$2000 shipped #fuckit this week only __________________