CA FS: HKS RB26 V-cam Step Pro and it is serious business - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

C-unit · 01-24-2013, 05:31 PM

As some of you can i see I am selling all the Expensive stuff lately..ie: ARC Twin entry cooler, Nismo Mag wheels and now the Vcam pro. I really hate doing this since I plan to keep them and install it on the R34 when they before legal. However, Bad things happen and I need the cash.

I will post the Price here first so for those who are not interested, you can just skip the whole thread and move on.
I need $5200 + $250(air mail)/$80(surface mail) Keep in mind, this is the Step Pro, not the Step 1 and 2. MSRP was $7500 for it.

So for those who are interested, here is what it does.
[ STEP PRO ]

Features
V CAM system for higher levels of tuning compared to Step 1　and Step 2.
Specially designed cam has duration of 264°, valve lift 10mm. Reviewing cam material, profile and valve timing change, Step Pro is suited to higher power outputs at high rpm.
Billet camshaft is used to enhance strength even when used with upgraded valve springs at high RPM (recommended limit 8800rpm). Added strength facilitates a hollow cam design has allowing Step Pro to be 560g lighter than Step 1 and Step 2.
Valve timing has 50° adjustment from 80°~130°
Exhaust cam can be selected to suit vehicle specifications.
Step 2 valve springs are required.
Recess modification of the cylinder head is required.

More info can be found here:
HKS RB26 V CAM SYSTEM

This is what the kit will come with
- Valve cover
- Camshaft
- Cam gear
- sensor
- harness
- adjuster
- instruction

The part was used on a R33 with HKS 2.8L kit before. Running twin HKS GT-RS. I bought the V-cam off him since he was parting his car out.

Part is located In my Hong Kong house. It's all packaged ready to ship.
Here are couple pics of the part.

All the pics can be found here:
HKS Vcam Pro Photos by GenerisLabo | Photobucket

PM or email me if you have any questions. [email protected]

BlewByYou · 01-24-2013, 05:42 PM

Nice.. A lil out of my budget:/

K_style · 01-24-2013, 06:37 PM

Quote:

Originally Posted by BlewByYou

Nice.. A lil out of my budget:/

Just a little ??

Charles, I don't think you belong here... keep trying to sell those High end stuff..

We BROKE !!!!

GLWS...

C-unit · 01-24-2013, 07:05 PM

^ I don't want to sell it but the new 33R has a rod knock...

VAs13 · 01-24-2013, 07:27 PM

man you always have the coolest shit, if only i didnt spend so much $ else where i would have picked this up for sure.

C-unit · 01-26-2013, 11:54 AM

Buy me now!!!!!!!!!!

C-unit · 01-30-2013, 04:19 PM

buy me!!!!!!!!!!!!!!!!!!!!!

Big Zee · 01-30-2013, 05:59 PM

put new rods and bearings in and keep it!!

GLWS

C-unit · 02-03-2013, 02:50 PM

Buy MEEEEE

OrangeVirus1 · 02-03-2013, 03:05 PM

holy shit.. 7500$ CAM? ( bump ) no offense, but you coulda got custom ground cams for waaaaaaaay less

C-unit · 02-03-2013, 07:16 PM

Appearently..you have no clue wtf vcams are.

is ur custom ground cams valving timing adjustable?? dont think so.

OrangeVirus1 · 02-03-2013, 07:24 PM

sure they are

95_S14 · 02-03-2013, 07:27 PM

Quote:

Originally Posted by OrangeVirus1

sure they are

Your a dumbass stop thread shitting

C-unit · 02-03-2013, 07:30 PM

Quote:

Originally Posted by OrangeVirus1

sure they are

you are an idiot....choosing your cam spec is differnet than adjustable valve timing.

anyways..thanks for the bump

***S14DB*** · 02-04-2013, 01:28 AM

So this doesn't include the VALCON II?

C-unit · 02-04-2013, 01:43 AM

This one uses the a digital controller for adjustment instead of the Valcon.

You can get the Valcon upgrade from HKS.

http://1jzmerc.com/files/hks-faq/hks...ion-manual.pdf

Ernie · 06-25-2014, 05:57 AM

Do you still have it?

*brndck* · 06-25-2014, 02:47 PM

Quote:

Originally Posted by Ernie

Do you still have it?

This thread is well over a year old.
Next time send a PM instead of bumping a graveyard thread.

01-24-2013, 05:31 PM	#1
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	FS: HKS RB26 V-cam Step Pro and it is serious business As some of you can i see I am selling all the Expensive stuff lately..ie: ARC Twin entry cooler, Nismo Mag wheels and now the Vcam pro. I really hate doing this since I plan to keep them and install it on the R34 when they before legal. However, Bad things happen and I need the cash. I will post the Price here first so for those who are not interested, you can just skip the whole thread and move on. I need $5200 + $250(air mail)/$80(surface mail) Keep in mind, this is the Step Pro, not the Step 1 and 2. MSRP was $7500 for it. So for those who are interested, here is what it does. [ STEP PRO ] Features V CAM system for higher levels of tuning compared to Step 1　and Step 2. Specially designed cam has duration of 264°, valve lift 10mm. Reviewing cam material, profile and valve timing change, Step Pro is suited to higher power outputs at high rpm. Billet camshaft is used to enhance strength even when used with upgraded valve springs at high RPM (recommended limit 8800rpm). Added strength facilitates a hollow cam design has allowing Step Pro to be 560g lighter than Step 1 and Step 2. Valve timing has 50° adjustment from 80°~130° Exhaust cam can be selected to suit vehicle specifications. Step 2 valve springs are required. Recess modification of the cylinder head is required. More info can be found here: HKS RB26 V CAM SYSTEM This is what the kit will come with - Valve cover - Camshaft - Cam gear - sensor - harness - adjuster - instruction The part was used on a R33 with HKS 2.8L kit before. Running twin HKS GT-RS. I bought the V-cam off him since he was parting his car out. Part is located In my Hong Kong house. It's all packaged ready to ship. Here are couple pics of the part. All the pics can be found here: HKS Vcam Pro Photos by GenerisLabo \| Photobucket PM or email me if you have any questions. [email protected]

02-04-2013, 01:28 AM	#15
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	So this doesn't include the VALCON II? __________________ Comments should be taken as Opinions not as Statements of Fact

01-24-2013, 05:42 PM	#2
BlewByYou Zilvia FREAK! Join Date: Jan 2011 Location: 37 58 N 23 43 E Age: 37 Posts: 1,518 Trader Rating: (10) Feedback Score: 10 reviews	Nice.. A lil out of my budget:/

01-24-2013, 07:05 PM	#4
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	^ I don't want to sell it but the new 33R has a rod knock...

01-24-2013, 07:27 PM	#5
VAs13 Nissanaholic! Join Date: Nov 2006 Location: Tampa, FL Posts: 2,099 Trader Rating: (28) Feedback Score: 28 reviews	man you always have the coolest shit, if only i didnt spend so much $ else where i would have picked this up for sure.

01-26-2013, 11:54 AM	#6
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Buy me now!!!!!!!!!!

01-30-2013, 04:19 PM	#7
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	buy me!!!!!!!!!!!!!!!!!!!!!

01-30-2013, 05:59 PM	#8
Big Zee Zilvia Addict Join Date: Oct 2005 Location: BC Age: 40 Posts: 860 Trader Rating: (10) Feedback Score: 10 reviews	put new rods and bearings in and keep it!! GLWS

02-03-2013, 02:50 PM	#9
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Buy MEEEEE

02-03-2013, 03:05 PM	#10
OrangeVirus1 BANNED Join Date: Jan 2013 Location: PyongYang DPRK-N. Korea, Province 2 Posts: 1,236 Trader Rating: (0) Feedback Score: 0 reviews	holy shit.. 7500$ CAM? ( bump ) no offense, but you coulda got custom ground cams for waaaaaaaay less

02-03-2013, 07:16 PM	#11
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	Appearently..you have no clue wtf vcams are. is ur custom ground cams valving timing adjustable?? dont think so.

02-03-2013, 07:24 PM	#12
OrangeVirus1 BANNED Join Date: Jan 2013 Location: PyongYang DPRK-N. Korea, Province 2 Posts: 1,236 Trader Rating: (0) Feedback Score: 0 reviews	sure they are

02-04-2013, 01:43 AM	#16
C-unit Nissanaholic! Join Date: Apr 2005 Location: Vancouver, Hongkong. Age: 40 Posts: 1,808 Trader Rating: (7) Feedback Score: 7 reviews	This one uses the a digital controller for adjustment instead of the Valcon. You can get the Valcon upgrade from HKS. http://1jzmerc.com/files/hks-faq/hks...ion-manual.pdf

06-25-2014, 05:57 AM	#17
Ernie Join Date: Dec 2007 Location: Long Beach, CA Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	Do you still have it?