Wiring Specialties Sr20det (s13) to S14 chassis Fuse box ?

[liveordie72089]

I have just completed my engine swap with the wiring specialties harness (Best harness I have ever used hands down, save the headache, support wiring specialties, you wont regret it!). Anyways, I am trying to figure out why the fuse box isn't getting power to it. Here are the pictures that I took and you can see what I had to do to get power to the fuse box.

First wire im guessing is right but just want to make sure?


This connection red to white has to be connected straight to the battery cable going to the trunk.


Heres where the wire has to connect in order for me to get any kind of power to the car for it to start.

[wiring specialties]

Hey, just make sure that the main battery cable in the wiring specialties harness connects to the battery feed. Needs to be a good connection.
Also, the fuse box power wire (white/red) needs to be connected to the battery as well. There should be two white/red wires.

Hope this helps.

[liveordie72089]

Originally Posted by wiring specialties

Hey, just make sure that the main battery cable in the wiring specialties harness connects to the battery feed. Needs to be a good connection.
Also, the fuse box power wire (white/red) needs to be connected to the battery as well. There should be two white/red wires.

Hope this helps.

Exactly what I needed thank you! Best wiring harness ever! Car started right up. Will be using these from now on!

[appmatteach]

good,the fuse box power wire (white/red) needs to be connected to the battery as well. There should be two white/red wires.thanks