![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Leaky Injector
![]() Join Date: Mar 2013
Location: muscatine iowa
Posts: 149
Trader Rating: (2)
![]() Feedback Score: 2 reviews
|
Tranny getting really hot... Help?
So I notice when I ever drive my car (s14) there's always a lot of heat coming from the tranny hole or by the shifter and the other day some smoke was coming threw the hole any ideas on what it could be
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Zilvia Junkie
![]() Join Date: Oct 2009
Location: Santa Rosa, CA
Age: 43
Posts: 359
Trader Rating: (5)
![]() Feedback Score: 5 reviews
|
Holy cow, really! WOW is all I have to say... Very impressive!
__________________
As long as you're not a ham-fisted retard there shouldn't be a problem. |
![]() |
![]() |
![]() |
#5 |
Zilvia Addict
![]() |
Try using dei heat reflective racing film stuff around the tunnel area and that should keep some of the heat out, or heat wrap the exhaust system if you wanna gain some ponies and keep it cooler
__________________
Instagram username:angelmkiv |
![]() |
![]() |
![]() |
#8 |
Leaky Injector
![]() |
Please keep your sex life off of zilvia, there are children present who don't know what a tranny is.
__________________
|
![]() |
![]() |
![]() |
#9 |
Nissanaholic!
![]() |
|
![]() |
![]() |
![]() |
#11 |
Zilvia Junkie
![]() |
When my buddy and I did a vh45de swap we had the same issue at the Y-pipe. Turns out some of the welds burned through and we warped the flanges. It was all exhaust leak. The smoke in the cabin and all the extreme heat coming through the hole. Go on courtesy nissan .com and order that ring that seals the trans tunnel, its like 20 bucks. Keep the smoke out. Than check all your flanges and welds.
I had all my flanges decked flat to make sure the seal is good. It was real check an performance shop can do it. |
![]() |
![]() |
![]() |
Bookmarks |
|
|