5 lug swappage! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

justinhustle · 07-01-2004, 10:19 AM

when you s14 guys swap to 5 lug, did you get front hubs only or hubs and spindles?

im about to swap out project heaven's front hubs and i didnt know if it needs the spindles as well

thanks

drift freaq · 07-01-2004, 10:21 AM

Quote:

Originally Posted by [email protected]

when you s14 guys swap to 5 lug, did you get front hubs only or hubs and spindles?

im about to swap out project heaven's front hubs and i didnt know if it needs the spindles as well

thanks

\
you only need to swap the hubs. you only need to use the spindles when installing them on s13

justinhustle · 07-01-2004, 10:37 AM

i forgot to add

are they side specific? and if i get one with spindles on it, can i remove the spindle, or should i just swap the whole unit?

Levi@GTPRO · 07-01-2004, 10:52 AM

Just remove the hub from the spindle. Its alot less work involved. To swap spindle's your gonna have to seperate the spindle from the ball joint on the control arm and tie rod. When you do that your gonna end up destroying them making you have to buy new ball joints and tie rod ends as well as have them pressed out and in. To much work. As far as side specific i dont believe they are.

07-01-2004, 10:19 AM	#1
justinhustle Nissanaholic! Join Date: Mar 2003 Location: ohio Age: 45 Posts: 1,693 Trader Rating: (0) Rides Gallery: justinhustle Feedback Score: 0 reviews	5 lug swappage! when you s14 guys swap to 5 lug, did you get front hubs only or hubs and spindles? im about to swap out project heaven's front hubs and i didnt know if it needs the spindles as well thanks

07-01-2004, 10:52 AM	#4
Levi@GTPRO Zilvia Member Join Date: Dec 2003 Location: Industry Age: 43 Posts: 262 Trader Rating: (0) Feedback Score: 0 reviews	Just remove the hub from the spindle. Its alot less work involved. To swap spindle's your gonna have to seperate the spindle from the ball joint on the control arm and tie rod. When you do that your gonna end up destroying them making you have to buy new ball joints and tie rod ends as well as have them pressed out and in. To much work. As far as side specific i dont believe they are. __________________ VisitGTPRO! This post has been brought to you by LAND HO the fresh makers!

07-01-2004, 10:37 AM	#3
justinhustle Nissanaholic! Join Date: Mar 2003 Location: ohio Age: 45 Posts: 1,693 Trader Rating: (0) Rides Gallery: justinhustle Feedback Score: 0 reviews	i forgot to add are they side specific? and if i get one with spindles on it, can i remove the spindle, or should i just swap the whole unit?