OK FS: GTX2867R SR20 Setup - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wawazat8402 · 10-05-2014, 01:25 PM

Well, I am moving on to a larger setup so this one is up for sale. It is a great midrange power setup and provides power deliver that reminds me of my old G8 GT. It would provide a solid setup for great response and 375-400whp depending on the rest of the engine.

I put maybe 500 miles on this setup. The rings on 1&2 let go but no catastrophic failure or debris found anywhere in the engine. They just wouldn't make enough compression for the engine to start again

It will bolt up to a stock O2 housing down pipe setup. Custom hot pipe and intake may be needed.

Price: $1,800obo this is well over $500 less than it would cost to piece together new. Willing to ship at buyers expense.

The setup consists of the following:
GTX2867R with .64 AR IWG turbine housing
Codyace modified stock SR manifold for Tial MVS EWG with Swaintech White Lightning coating
Braided coolant and oil lines for S14 water neck with oil restrictor
Tial MV-S wastegate with open dump pipe currently using red and black springs for 1 bar base pressure
Extra springs for other base pressures (white, blue, yellow, green, gold)

You can see the bracket I used to hold the IWG flapper shut without welding it. IWG could still be used if wanted.

Mild steel dump pipe with heat wrap.

Spare springs

Synapse DV

This thing is more compact than their BOV, however, it must be recirc'd. It had super fast response and for those that care was still audible when recirculated properly.

The DV is a little scratched up due to being tucked under my hot pipe to keep it out of sight. I have a brand new aluminum weld fitting for it that is included. The silicone couple going to the intake pipe is also included.

Price: $150

I can meet anywhere in OKC and depending on amount of parts bought, maybe further like Tulsa.

Item will ship within 1 week of payment being received. I work a crazy schedule but will provide updates and get it on its way within this time period.

S13alldayyo · 10-05-2014, 07:29 PM

Would you seperate the lines

Sent from my iPhone using Tapatalk

adamhanna · 10-05-2014, 11:44 PM

would you sell just the flange for that bov?

wawazat8402 · 10-06-2014, 03:19 AM

I won't be parting anything out until the turbo is sold. Thanks for the interest though guys.

Jdmsilivias13 · 10-06-2014, 07:51 AM

How much just for the turbo

sr20time · 10-06-2014, 08:04 AM

Yeah can u pm price for turbo. And how comparable is this to 2871r?

wawazat8402 · 10-08-2014, 05:10 PM

All PMs have been replied to.

10-05-2014, 01:25 PM	#1
wawazat8402 Zilvia Member Join Date: Jan 2005 Location: OKC, OK Age: 41 Posts: 183 Trader Rating: (14) Feedback Score: 14 reviews	FS: GTX2867R SR20 Setup Well, I am moving on to a larger setup so this one is up for sale. It is a great midrange power setup and provides power deliver that reminds me of my old G8 GT. It would provide a solid setup for great response and 375-400whp depending on the rest of the engine. I put maybe 500 miles on this setup. The rings on 1&2 let go but no catastrophic failure or debris found anywhere in the engine. They just wouldn't make enough compression for the engine to start again It will bolt up to a stock O2 housing down pipe setup. Custom hot pipe and intake may be needed. Price: $1,800obo this is well over $500 less than it would cost to piece together new. Willing to ship at buyers expense. The setup consists of the following: GTX2867R with .64 AR IWG turbine housing Codyace modified stock SR manifold for Tial MVS EWG with Swaintech White Lightning coating Braided coolant and oil lines for S14 water neck with oil restrictor Tial MV-S wastegate with open dump pipe currently using red and black springs for 1 bar base pressure Extra springs for other base pressures (white, blue, yellow, green, gold) You can see the bracket I used to hold the IWG flapper shut without welding it. IWG could still be used if wanted. Mild steel dump pipe with heat wrap. Spare springs Synapse DV This thing is more compact than their BOV, however, it must be recirc'd. It had super fast response and for those that care was still audible when recirculated properly. The DV is a little scratched up due to being tucked under my hot pipe to keep it out of sight. I have a brand new aluminum weld fitting for it that is included. The silicone couple going to the intake pipe is also included. Price: $150 I can meet anywhere in OKC and depending on amount of parts bought, maybe further like Tulsa. Item will ship within 1 week of payment being received. I work a crazy schedule but will provide updates and get it on its way within this time period.

10-05-2014, 07:29 PM	#2
S13alldayyo Zilvia Addict Join Date: Mar 2012 Location: Florida Posts: 653 Trader Rating: (3) Feedback Score: 3 reviews	Would you seperate the lines Sent from my iPhone using Tapatalk

10-05-2014, 11:44 PM	#3
adamhanna Leaky Injector Join Date: Jan 2014 Location: Nanaimo,BC,Canada Age: 30 Posts: 120 Trader Rating: (0) Feedback Score: 0 reviews	would you sell just the flange for that bov?

10-06-2014, 03:19 AM	#4
wawazat8402 Zilvia Member Join Date: Jan 2005 Location: OKC, OK Age: 41 Posts: 183 Trader Rating: (14) Feedback Score: 14 reviews	I won't be parting anything out until the turbo is sold. Thanks for the interest though guys.

10-06-2014, 07:51 AM	#5
Jdmsilivias13 Leaky Injector Join Date: Jan 2013 Location: West Chester pa Age: 37 Posts: 68 Trader Rating: (2) Feedback Score: 2 reviews	How much just for the turbo

10-06-2014, 08:04 AM	#6
sr20time Zilvia Junkie Join Date: Oct 2010 Location: canada Posts: 597 Trader Rating: (8) Feedback Score: 8 reviews	Yeah can u pm price for turbo. And how comparable is this to 2871r?

10-08-2014, 05:10 PM	#7
wawazat8402 Zilvia Member Join Date: Jan 2005 Location: OKC, OK Age: 41 Posts: 183 Trader Rating: (14) Feedback Score: 14 reviews	All PMs have been replied to.