|
|
|||||||
| For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
 |
|
|
Thread Tools | Display Modes |
08-05-2014, 06:06 PM
|
#1 |
|
Leaky Injector
Join Date: Sep 2006
Location: chicago
Age: 39
Posts: 62
Trader Rating: (2)
 Feedback Score: 2 reviews
|
FS: S13 Parts ka24de engine, trans, kaaz diff & more
Name: shiftin_sideways
EMAIL:Pm is best LOCATION:near Schaumburg, IL PAYMENT: cash ------------------------------------------------------------------ ITEM: KA24DE engine PRICE: $200 SHIPPING: NO DESCRIPTION: bought this about 4 years ago as a spare. I was told it runs fine. engine rotates freely by hand. Note: long block means no peripheral accessories i.e. no intake manifold, no distributor, no fuel injectors, etc.  ITEM: SR trans PRICE: $60 SHIPPING: NO DESCRIPTION: bought trans about 5 years ago, told doesn't grind and no leaks. never installed to drive and see if it was true. the trans that will be for sale will be the one on the left in picture has orange overflow tube and extension housing. NOTE: trans cross member in picture will not come with trans.  ITEM: KA trans with SR bellhousing PRICE: $10 SHIPPING: NO DESCRIPTION: grinds in 2nd gear, had about 100,000 miles on it when pulled. buy it and rebuild the internals for a spare is my suggestion to you. the trans for sale will be the one in the picture on the right. ITEM: Kaaz 2 way clutch type differential PRICE: $640 SHIPPING: NO DESCRIPTION: about 8 years old, less than 10,000 miles on it, has about 10 track events on it. Just replaced the diff oil a month ago.  ITEM: Powered by Max version 1 Knuckles and control arms PRICE: $300 SHIPPING: NO DESCRIPTION: I got these knuckles when Powered by Max first started, maybe 4 years ago(?). The tie rod connection on stock s13 knuckle is modified to allow for more angle. There are two settings for tie rod angle. The control arms have had their stock bump stops removed and replace with an adjustable bump stop. The arms have been braced for less torsion of control arms. I drove in the snow once, which explains rust. All work done on knuckles and control arms was done by Powered by Max.     ITEM: Uras Tatsunootoshigo(sea horse) PRICE: $70 SHIPPING: Buyer Pays DESCRIPTION: these allow less effort in pulling ebrake to lock up rear wheels. install on rear brake caliper assemblies. Some more info in link. http://www.rhdjapan.com/uras-tatsunootoshigo-s13.html  picture of stock vs. Uras stock on the left   ITEM: YANACK Steering Rack Collar Set PRICE: $80 SHIPPING: Buyer Pays DESCRIPTION: solid aluminum bushings for steering rack on s13.   ITEM: Apexi Afc-Neo PRICE: $100 SHIPPING: Buyer Pays DESCRIPTION: Bought 2 years ago, told it works, never tested or powered up to see if works  ITEM: various ecu's from s13 PRICE: $60 each SHIPPING: Buyer Pays DESCRIPTION: 2 #24 and 1 #28, one of them is for auto ka24de in s13 and the other is for manual ka24de in s13. you will have to check part #'s to make sure. Jim Wolf Technology may have the part #'s for all the ecu's.    ITEM: steering bushing for s13 from touge factory PRICE: $40 SHIPPING: Buyer Pays DESCRIPTION: steering bushing that mounts on steering column above u joint in steering rack. the stock bushing is located near the firewall. reduces the amount in play between the steering wheel and steering rack.  ITEM: Jdm steering wheel PRICE: $80 SHIPPING: NO DESCRIPTION: size 350 mm, semi dished, 6 bolt pattern, color is maziora purple. some paint chipping on back on wheel.  ITEM: HJC AR-10 helmet PRICE: $160 SHIPPING: NO DESCRIPTION: size m, hat sizes 7 1/8- 7 1/4, comes with clear visor, gold tinted visor(discontinued by HJC), and helmet bag. Wore for about 10 events. Snell Sa2005  ITEM: Peak performance trans mount for sr or ka PRICE: $50 SHIPPING: Buyer Pays DESCRIPTION: made of polyurethane  ITEM: Peak performance inner tie rods with spacer PRICE: $50 SHIPPING: Buyer Pays DESCRIPTION: no play in ball joints used for 1500 miles and 3 track events.  ITEM: s13 steering rack PRICE: $40 SHIPPING: NO DESCRIPTION: no leaks when pulled, hard lines have no rust pic below ITEM: flip up headlights set PRICE: $20 SHIPPING: NO DESCRIPTION: complete assembly with motors, last time operated lights lit, went up, but not down, don't know if motor assembly is to blame pic below ITEM: s13 stock shifter PRICE: $5 each SHIPPING: Buyer Pays DESCRIPTION: hass clip and plastic retainer intact  ITEM: trans crossmember for manual sr or ka PRICE: $5 each SHIPPING: Buyer Pays DESCRIPTION: comes with factory rubber trans mount in good condition  ITEM: Destruction warehouse shift know PRICE: $25 SHIPPING: Buyer Pays DESCRIPTION: threaded for stock s13 shifter, size is about the same as stock s13 shift knob   ITEM: ebrake lever with drift knob, complete ebrake line PRICE: $30 SHIPPING: Buyer Pays DESCRIPTION: ebrake lever with attached cables that go all the way to rear calipers, pulled from a car with about 100k miles  also in above picture are wiper arms, turn signal stalk, wiper stock, wiper motor, ash tray, flash, rear defrost, headlight flip switches all $5,willing to ship all ITEM: 5mm spacer for 4/5x114.3 hub pattern PRICE: $20 for all four SHIPPING: Buyer Pays DESCRIPTION: used once  ITEM: ignition coil for ka24de PRICE: $20 SHIPPING: Buyer Pays DESCRIPTION: used to test a no start problem, other than that not used since bought brand new  ITEM: fuel rail for ka24de no injectors included PRICE: $5 SHIPPING: Buyer Pays DESCRIPTION: didn't test fuel rail for leaks, just took out injectors for another engine  ITEM: stock s13 axles PRICE: $30 each SHIPPING: NO DESCRIPTION: had about 100k miles on them when pulled, 3 track events  ITEM: stock s13 open diff PRICE: $20 SHIPPING: NO DESCRIPTION: taken out of car with 100k miles  Also in above pic, rear lower control arms, starter, and brake calipers(need rebuild) are $5 dollars NO SHIPPING ITEM: A/C components for s13 KA24DE PRICE: $5 for everything SHIPPING: NO DESCRIPTION: don't know if anything works or leaks  ITEM: key cylinders for s13 hatch(don't know if fits s13 coupe) PRICE: $10 SHIPPING: NO DESCRIPTION: key cylinders for both front doors, rear hatch, glove box,and ignition cylinder. all lock and unlock with one key. suggest to re key all locks for a new key so new key won't be so worn down.  Also have a Cusco front strut bar, stock exhaust (after catalytic converter all the way to muffler)with 1 year old muffler , and 15'' tires. I will upload pics as soon as I can. |
|
|
| Sponsored Links |
|
08-05-2014, 09:17 PM
|
#2 |
|
Nissanaholic!
 
Join Date: Aug 2013
Location: Denver
Age: 41
Posts: 2,052
Trader Rating: (14)
 Feedback Score: 14 reviews
|
If you change your mind in the ac stuff, I'll take it all except the compressor and bracket. Shoot me a PM shipped to 80205 if you want.
Thanks!
__________________
S13 Vert | SR | PE1420 | 5-Speed | 15x9.5 - 0 | 
|
|
|
|
|
08-10-2014, 03:17 PM
|
#6 |
|
Leaky Injector
Join Date: Jul 2014
Location: Buford, GA
Age: 37
Posts: 55
Trader Rating: (0)
Feedback Score: 0 reviews
|
DAM! i wanted that a/c system. haha Great fucking deals man.. interested in the keylock setup, willing to ship to 30518?
dont want glove box lock -_- just doors and hatch!! since mine are all different LOL. |
|
|
|
|
10-17-2014, 09:37 PM
|
#14 |
|
Zilvia Junkie
 Join Date: May 2011
Location: Atlanta, GA
Age: 33
Posts: 433
Trader Rating: (7)
Feedback Score: 7 reviews
|
Any guess on what shipping would cost on the manual transmission cross member? I really just need the bracket off of that lower one that braces the exhaust.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
