FL 1.5jz 420whp r154 aem etc complete swap plus - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

driftslideways · 03-07-2015, 09:48 AM

5,500 firm ... over 7k to put together... be doing burnouts this weekend

Navarre florida 850-777-6196

1jz head machined on a ge block with gte pistons and wrist pins with new oil pump and bearings etc timing belt water pump etc super clean.
Top feed an fitting fuel rail with denso 630cc injectors
Top mount T4 manifold
Garrett to4e rebuilt
3 inch down pipe and exhaust good for s13 and s14
Mount kit
R154 with spec disc
1 piece aluminum s13 driveshaft
Driftmotion pulleys
Aem v2 from driftmotion with pnp harness.
Ebay fpr
External oil cooler with remote resivoir
Huge k and n air filter.

This motor is super clean and runs great, can show it run before pulling

Dyno tuned at adams dyno tuning made 420 wheel

Can make more with a retune

Wiring is easy as fuck.... like 4 power wires and 2 grounds boom done hookup fuel start.

Will include innovate wide band with new sensor, auto meter boost gauge, temp gauge, and oil pressure gauge, radiator, fan, short route intercooler etc

driftslideways · 03-08-2015, 12:33 AM

How the fuck is there no intrest on this lol

FLG · 03-08-2015, 12:34 AM

Damn just what I'm looking for.

If you ever head down into central FL send me a PM or email [email protected]
Thanks.

driftslideways · 03-08-2015, 12:37 AM

Quote:

Originally Posted by FLG

Damn just what I'm looking for.

If you ever head down into central FL send me a PM or email [email protected]
Thanks.

Then Come Get This bitch while it's still in the car to run lol, I'm trying to pickup a 67 mustang

driftslideways · 03-09-2015, 10:41 AM

Bump 5k is a steal come get it, will be pulling it out soon

Matt300ZXT · 03-09-2015, 11:09 AM

If you pull it, would you be selling the motor separately? I know most people are gonna be coming after that R154 if you do part it, I'd be interested in the long block.

driftslideways · 03-09-2015, 11:13 AM

I'm trying not to separate the stuff

driftslideways · 03-09-2015, 11:35 AM

I'll sell the whole 1.5jz minus top mount setup, and aem setup for 3k. Then sell the while top mount kit with aem for 2500?

carsfreak88 · 03-09-2015, 10:15 PM

Pm me price how much just for aem

d_nice · 03-10-2015, 12:15 PM

good stuff here..

bmar19 · 04-23-2015, 12:05 AM

how much for gauges need temp and pressure

a-s-silvia · 04-23-2015, 10:09 AM

Florida seller and low posts and no trader rating better be careful Zilvian's

03-07-2015, 09:48 AM	#1
driftslideways Join Date: Sep 2014 Location: pensacola florida Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	1.5jz 420whp r154 aem etc complete swap plus 5,500 firm ... over 7k to put together... be doing burnouts this weekend Navarre florida 850-777-6196 1jz head machined on a ge block with gte pistons and wrist pins with new oil pump and bearings etc timing belt water pump etc super clean. Top feed an fitting fuel rail with denso 630cc injectors Top mount T4 manifold Garrett to4e rebuilt 3 inch down pipe and exhaust good for s13 and s14 Mount kit R154 with spec disc 1 piece aluminum s13 driveshaft Driftmotion pulleys Aem v2 from driftmotion with pnp harness. Ebay fpr External oil cooler with remote resivoir Huge k and n air filter. This motor is super clean and runs great, can show it run before pulling Dyno tuned at adams dyno tuning made 420 wheel Can make more with a retune Wiring is easy as fuck.... like 4 power wires and 2 grounds boom done hookup fuel start. Will include innovate wide band with new sensor, auto meter boost gauge, temp gauge, and oil pressure gauge, radiator, fan, short route intercooler etc

03-08-2015, 12:34 AM	#3
FLG Leaky Injector Join Date: Sep 2013 Location: Summerfield, Florida Posts: 134 Trader Rating: (0) Feedback Score: 0 reviews	Damn just what I'm looking for. If you ever head down into central FL send me a PM or email [email protected] Thanks. __________________ Scrapeddd Media

04-23-2015, 10:09 AM	#12
a-s-silvia Zilvia FREAK! Join Date: Nov 2006 Location: Colorado Age: 38 Posts: 1,298 Trader Rating: (5) Feedback Score: 5 reviews	Florida seller and low posts and no trader rating better be careful Zilvian's __________________ [SIGPIC][/SIGPIC]

03-08-2015, 12:33 AM	#2
driftslideways Join Date: Sep 2014 Location: pensacola florida Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	How the fuck is there no intrest on this lol

03-09-2015, 10:41 AM	#5
driftslideways Join Date: Sep 2014 Location: pensacola florida Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	Bump 5k is a steal come get it, will be pulling it out soon

03-09-2015, 11:09 AM	#6
Matt300ZXT Leaky Injector Join Date: Apr 2007 Location: Chattanooga, TN Age: 44 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	If you pull it, would you be selling the motor separately? I know most people are gonna be coming after that R154 if you do part it, I'd be interested in the long block.

03-09-2015, 11:13 AM	#7
driftslideways Join Date: Sep 2014 Location: pensacola florida Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	I'm trying not to separate the stuff

03-09-2015, 11:35 AM	#8
driftslideways Join Date: Sep 2014 Location: pensacola florida Posts: 18 Trader Rating: (0) Feedback Score: 0 reviews	I'll sell the whole 1.5jz minus top mount setup, and aem setup for 3k. Then sell the while top mount kit with aem for 2500?

03-09-2015, 10:15 PM	#9
carsfreak88 Join Date: Sep 2011 Location: brooklyn ny Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	Pm me price how much just for aem

03-10-2015, 12:15 PM	#10
d_nice Post Whore! Join Date: Aug 2010 Location: florida Age: 44 Posts: 3,596 Trader Rating: (39) Feedback Score: 39 reviews	good stuff here..

04-23-2015, 12:05 AM	#11
bmar19 Zilvia Junkie Join Date: Jul 2013 Location: Broward Posts: 563 Trader Rating: (4) Feedback Score: 4 reviews	how much for gauges need temp and pressure