FL Nissan R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

KiLLeR2001 · 07-01-2015, 07:06 PM

Nissan Infiniti 240SX 180SX SILVIA SKYLINE 300ZX Q45 R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio.

If upgrading from a stock 4.083 ring gear from a 240sx this gear set will give you a higher top speed. Ideal for cars putting down more power that would like to cruise on the highway at lower RPM. This is the same final drive gear ratio as an S15 Nissan Silvia Spec-R.

Comes with LH and RH shims and ring gear bolts.

$240 shipped.

If you have any questions or looking for another gear set ratio please let me know. PM for quickest response.

SR20PWRALTY · 07-03-2015, 01:47 AM

What will be needed to put in J30 diff?

KiLLeR2001 · 07-03-2015, 06:06 AM

You will need to swap the pinion washers, spacer, and bearings off of the J30 pinion gear onto this one. Once that is done you press it into the pumpkin. Once ring gear is installed onto a diff, use the shims to position it onto the pinion gear. Always be sure to verify backlash.

KiLLeR2001 · 07-03-2015, 11:39 AM

This has been sold!

07-01-2015, 07:06 PM	#1
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	Nissan R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio Nissan Infiniti 240SX 180SX SILVIA SKYLINE 300ZX Q45 R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio. If upgrading from a stock 4.083 ring gear from a 240sx this gear set will give you a higher top speed. Ideal for cars putting down more power that would like to cruise on the highway at lower RPM. This is the same final drive gear ratio as an S15 Nissan Silvia Spec-R. Comes with LH and RH shims and ring gear bolts. $240 shipped. If you have any questions or looking for another gear set ratio please let me know. PM for quickest response. __________________ Last edited by KiLLeR2001; 07-02-2015 at 06:24 AM..

07-03-2015, 06:06 AM	#3
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	You will need to swap the pinion washers, spacer, and bearings off of the J30 pinion gear onto this one. Once that is done you press it into the pumpkin. Once ring gear is installed onto a diff, use the shims to position it onto the pinion gear. Always be sure to verify backlash. __________________

07-03-2015, 11:39 AM	#4
KiLLeR2001 Post Whore! Join Date: Jun 2007 Location: オーランドフロリダ Posts: 7,955 Trader Rating: (46) Feedback Score: 46 reviews	This has been sold! __________________

07-03-2015, 01:47 AM	#2
SR20PWRALTY Zilvia Junkie Join Date: Mar 2005 Location: SOCAL Posts: 579 Trader Rating: (13) Feedback Score: 13 reviews	What will be needed to put in J30 diff?