anyone else running L2 quick release?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sideviewcivic · 08-25-2004, 01:11 PM

Im running the L2 quick-release/spacer and the horn fuction isnt working i notice the momo horn button has 2 male connectors as the ground and constant power. Since my L2 didnt come with instructions for hooking up the horn function(recieved it as a gift). Could anyone send me an e-mail or post a pic or 2 of the connectors they have setup for the horn to work. Living in so cal with jackasses i need the use of a horn or else imma start using the glock as my horn.

drift into a curb · 08-25-2004, 01:32 PM

http://importnut.net/steeringswap.htm

This should have the procedure for wiring the horn.

twong85 · 08-25-2004, 05:53 PM

Well for my 91 240 I took the quick release had two connectors on both ends of it but my nismo hub only have 1 connecter. I wired the hot wire to the single wire on the hub and slipped the ground wire connection in between the metal face of the hub and the quick release as I tightened it onto the hub, this way the wire was properly grounded. On an hkb hub i think theres 2 connections on the hub so the procedure would have to be done on the hub/steering column end of the installation.

ch1873857 · 08-25-2004, 06:06 PM

why the hell do you need to remove the dash?

meme · 08-26-2004, 03:12 AM

i have a smaller QR and did what importnut did. the horn is woring great

i used a strip of metal from a spare radio sleeve and bolted it to the top bolt that holds the spiral cable set.

08-25-2004, 01:11 PM	#1
sideviewcivic BANNED Join Date: Jun 2003 Location: somewhere north of mexico Age: 40 Posts: 356 Trader Rating: (0) Feedback Score: 0 reviews	anyone else running L2 quick release?? Im running the L2 quick-release/spacer and the horn fuction isnt working i notice the momo horn button has 2 male connectors as the ground and constant power. Since my L2 didnt come with instructions for hooking up the horn function(recieved it as a gift). Could anyone send me an e-mail or post a pic or 2 of the connectors they have setup for the horn to work. Living in so cal with jackasses i need the use of a horn or else imma start using the glock as my horn.

08-25-2004, 01:32 PM	#2
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	http://importnut.net/steeringswap.htm This should have the procedure for wiring the horn. __________________ Go big or go home!

08-25-2004, 05:53 PM	#3
twong85 Zilvia Member Join Date: Apr 2004 Location: Monterey Park, CA Age: 39 Posts: 155 Trader Rating: (0) Feedback Score: 0 reviews	Well for my 91 240 I took the quick release had two connectors on both ends of it but my nismo hub only have 1 connecter. I wired the hot wire to the single wire on the hub and slipped the ground wire connection in between the metal face of the hub and the quick release as I tightened it onto the hub, this way the wire was properly grounded. On an hkb hub i think theres 2 connections on the hub so the procedure would have to be done on the hub/steering column end of the installation.

08-25-2004, 06:06 PM	#4
ch1873857 Nissanaholic! Join Date: Sep 2003 Location: Andrews Air Force Base Posts: 1,906 Trader Rating: (1) Feedback Score: 1 reviews	why the hell do you need to remove the dash?

08-26-2004, 03:12 AM	#5
meme Zilvia FREAK! Join Date: Jan 2003 Location: glendale,CA Age: 48 Posts: 1,094 Trader Rating: (8) Feedback Score: 8 reviews	i have a smaller QR and did what importnut did. the horn is woring great i used a strip of metal from a spare radio sleeve and bolted it to the top bolt that holds the spiral cable set.