OK SR20DET ACT Clutch + Flywheel - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240KA · 05-02-2018, 12:11 PM

I'm not sure on the mileage. This is from a parts car. The previous owner barely had it running when the engine let go. I'd GUESS and say this setup has 5k miles on it. (this car sat for a very long time...dude was in the military)

There appears to be plenty of pad life on the clutch.
I don't know anything about what used clutches are supposed to look like, so I don't know if the black coloration on the pads is normal or not. Please let me know if you have more knowledge about this.

After doing some research, finally figured out this is the kit
https://frsport.com/act-ns1-hdr6-6-p...-89-98-sr20det
https://www.advancedclutch.com/produ...=p4632-c240321

Clutch Pressure Plate - N015 (increase clamp load by 20 to 50 percent)
Clutch Disc - 6240006
Streetlite Flywheel - 600225

Includes Flywheel Bolts

Torque Capacity - 475ft/lbs (as seen on ACT website)

Asking $450 shipped for everything

Engine made 400whp, and this clutch setup should easily be good for that.

digital calipers shows pads at 0.41inches to 0.45inches from pad to pad (TON of life left)

05-02-2018, 12:11 PM	#1
240KA Zilvia Addict Join Date: Mar 2008 Location: OK Age: 41 Posts: 816 Trader Rating: (6) Feedback Score: 6 reviews	SR20DET ACT Clutch + Flywheel I'm not sure on the mileage. This is from a parts car. The previous owner barely had it running when the engine let go. I'd GUESS and say this setup has 5k miles on it. (this car sat for a very long time...dude was in the military) There appears to be plenty of pad life on the clutch. I don't know anything about what used clutches are supposed to look like, so I don't know if the black coloration on the pads is normal or not. Please let me know if you have more knowledge about this. After doing some research, finally figured out this is the kit https://frsport.com/act-ns1-hdr6-6-p...-89-98-sr20det https://www.advancedclutch.com/produ...=p4632-c240321 Clutch Pressure Plate - N015 (increase clamp load by 20 to 50 percent) Clutch Disc - 6240006 Streetlite Flywheel - 600225 Includes Flywheel Bolts Torque Capacity - 475ft/lbs (as seen on ACT website) Asking $450 shipped for everything Engine made 400whp, and this clutch setup should easily be good for that. digital calipers shows pads at 0.41inches to 0.45inches from pad to pad (TON of life left)