![]() |
|
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() |
Signal Light's not working after tapping into switched 12v
I tapped into the switched 12v for the hazard button, and the turn signals quit working, I set it back to the way it was and they still do not work.
I replaced the turn signal switch unit, as well as checked the fuses with no success. Any ideas of what actually may have broken?
__________________
5.3 V8 Swap w/ Nitrous |
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
Zilvia Member
![]() |
omg, I have been beating my head against the wall on this since NukeKS14's reply 2 weeks ago.
thanks for the diagram, it helped a lot, turns out the problem is with my eyes, i couldnt tell the diff between the green/white and green/yellow, got it all figured out!
__________________
5.3 V8 Swap w/ Nitrous |
![]() |
![]() |
![]() |
#4 |
Zilvia Member
![]() |
Glad you stuck with it. Electrical problems are some of my least favorite to deal with and some of the most frequent on this chassis.
https://www.nicoclub.com/archives/us...-database.html Grab an FSM for your car. They're extremely well written and very comprehensive. |
![]() |
![]() |
![]() |
Bookmarks |
|
|