FL S14 Partout - 1998 Kouki Built KA-T W/ Full Race Kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

~S13 Status~ · 08-21-2021, 09:49 AM

Was planning on selling my car as a whole, but figured it would be easier to try and let go of some stuff in chunks (Motor / Rolling Chassis). I have a 1998 Kouki with a fully built KA24DET (Full-Race Turbo Kit & GTX3071R). The car is currently running with no problems, has functional A/C and around 4.5k miles on the motor. Long block was built by Mazworx with just about everything they offer (I have all receipts), and parts/build list is listed below. Car made 516 hp / 526 TQ @ 24psi on E60 on a Haltech Elite 1500 and was tuned by Crispeed @ AGautosports. This is an great street setup that makes good power and spools quickly without the lag. If I wasn't needing to let go of all my car related stuff I wouldn't be doing so.. Hopefully someone can enjoy this platform.

Prices are negotiable and I'm open to different bundles if you are interested in multiple parts. I listed few bundles to give some ideas. I can send videos upon request & more pics

Shell Sold with Wheels

Suspension:
KW Variant 3 Coilovers
SPL Front Tension Rods
SPL outer tie rods / Z32 inner
SPC Rear Camber / traction arm kit & toe link
Subframe - (SPL Solid subframe bushings / GK Tech reinforcement Kit/ powdercoated black)
Energy Suspension Differential bushings
Z32 Front and Rear brakes
Stealth Fab Power Brace

Interior:
Alcantara (black) w/ red stitching wrapped Dashboard / Center console & lid / Shift Boot
Alcantara (black) wrapped Headliner / Sun visors / Front Pillars / Glove box
New Black carpet from Stock interiors
Street Faction Rear Seat Delete (Powder Coated Black)
Rear Plastics intact and not busted and broken
Skyline R33 Driver and Passenger Seats no rips and in good condition.
Clean Black Kouki Door panels
NRG Quick Release Hub
Personal Steering Wheel
AEM Trim Pot 12 position switch
JDM Kouki Cluster 180kph(set to MPH) / Dakota Digital Speedo
Garage Moon floor mats
Street Faction Fire Ext. mount (Coated Black)
Haltech Multi Can Gauge
Gizzmo Boost Controller

Exterior:
Street Faction Chassis Mount Wing & Bash Bar
OEM Kouki bumper & side skirts
Customer Splitter / Diffuser (Front Bumper / Side skirts / Rear )
VIS Carbon Fiber Vented Hood
Wheels - Enkei RPF1's powdercoated - (Front) 18 x 9.5 +15 & (Rear) 18 x 10.5 +15
Tires - Nitto NT05's (About 2k miles) - (Front) 265/35 & (Rear) 285/35

Engine: KA24DET
About everything that could be done at Mazworx to a KA.. (I have all receipts just shoot me a msg)
Block hot tanked sandblasted decked painted bored .20 over
CP pistons 9.0:1 with upgraded wrist pins
King Bearings main & rod bearings
Arp main studs
Crank polished and balanced
Crower Rods (not BC)
Head: Hot tanked, sand blasted, decked, valve job etc..
Ferrea valvetrain kit : valves / springs / retainers
350z shimless buckets
RB26 ARP Headstuds
Cosworth Headgasket
Kelford 264 cams
New OEM Front cover
New OEM Timing chain kit
Mechanically locked timing chain tensioners
ATI damper

NiceTime Racing K20 Coil pack bracket (Coated black)
K20 Coilpacks
Fuel System - (All SS fuel lines back to Fuel Tank / Radium fuel rail / ID 1700x Injectors / Radium High Flow Fuel Filter / AEM Fuel Regulator)
Full-Race Turbo kit - (Turbo Manifold - Downpipe - Backdoor Intercooler Setup)
Turbo - Garrett GTX3071R .78
Tial Mvr 44mm WG / Tial Q Bov
Z32 Transmission mated to an RB25 bellhousing
1 PC driveshaft
Z1 Motorsports Z32 short shifter
Competition 6 Puck White Bunny Clutch Kit

Wiring Specialties Pro Harness (Haltech 1500 / Z32 Trans / Haltech WB / K20 Coils)
Haltech Elite 1500 ECU / Flex fuel sensor etc.

What is listed below is what is left (A few other misc parts will be added)

KA24DE Longblock (Details listed above) includes ATI Damper / Fuel Rail / Starter / PS & AC & Quest Alternator: SOLD

Koyo N-flow Radiator w/ shroud and SPAL 14' Fan attached: $250

NiceTime Racing K-Series Coil Pack Bracket (Coated black): $225 (pics to added)

Injector Dynamics 1700x Injectors (2.5kish miles on them): $900 (Can be seen in engine pic, did not pull rail yet will add another pic)

Street Faction Fire Ext. mount (Coated Black): $80

Injector Dynamics 1050x Injectors (1.5kish miles before my E85 tune): $400

Haltech CAN Gauge $250 (pics to added)

Street Faction Chassis Wing & Bash Bar $1,100 (is $1,800 new)

Kouki Tail Lights SOLD

Kouki USDM Headlights $400

Carbon Fiber Sunroof Delete (Northwind Composites) *New never installed* $325

Kouki Vertex Lang Kit new and never installed (Front Bumper / Front Fenders / Side Skirts $1,500

S14 Kouki Front Bumper Retainer $50

S14 KA Fan Shroud $40

S14 Okuyama Carbing Front Strut Tower Bar $220

1

louisrosas00 · 08-21-2021, 10:58 AM

I'm interested in the seats how much??

Sent from my SM-N975U using Tapatalk

Silv1401 · 08-21-2021, 01:37 PM

PM'd.

Sent from my SM-N986U1 using Tapatalk

itsmrgreen · 08-21-2021, 05:58 PM

How much for the dash, center console, shift boot, headliner?

EDacIouSX · 08-21-2021, 06:03 PM

wow, who did your dash?

RedSled · 08-21-2021, 08:40 PM

Price for haltech multi can gauge ,z32 transmission and the z1 shifter

Whitey13 · 08-22-2021, 03:13 PM

Quote:

Originally Posted by EDacIouSX

wow, who did your dash?

seconded...

***Future240*** · 08-22-2021, 03:42 PM

Quote:

Originally Posted by Whitey13

seconded...

Thirded but the center console too.

~S13 Status~ · 08-22-2021, 05:21 PM

Quote:

Originally Posted by EDacIouSX

wow, who did your dash?

It was done by E3 Upholstery down here in South Fl. They did all the pieces

~S13 Status~ · 08-22-2021, 05:23 PM

Quote:

Originally Posted by itsmrgreen

How much for the dash, center console, shift boot, headliner?

I will get back to you on that. Was gonna let it go with shell but change of mind. I will give a price soon.

I will DM the rest of you guys that posted.

Nissan2nr22 · 08-22-2021, 07:22 PM

Hey bud I’m local and I will take a lot of those things I’m sure we can work out a deal

Check p.m.

raultheghoul · 08-23-2021, 07:55 AM

im interested in the street faction fire ext mount, how much shipped to 77396?

Silv1401 · 08-23-2021, 09:20 AM

Did you reply to PM's yet? Never got any message back and want to make sure you got mine about the Haltech gauge, and aero.

Sent from my SM-N986U1 using Tapatalk

itsmrgreen · 08-23-2021, 04:53 PM

Quote:

Originally Posted by ~S13 Status~

I will get back to you on that. Was gonna let it go with shell but change of mind. I will give a price soon.

I will DM the rest of you guys that posted.

Thanks I appreciate it!

sr20boy18 · 08-23-2021, 07:59 PM

Interested in the hood if your willing to ship lol

4drsleeper · 08-26-2021, 08:13 AM

Pm sent about the carpet

Janz99 · 08-27-2021, 06:53 AM

I'm interested in the door panels if your parting out the interior. Shoot me a PM with a price when you get a chance.

-Ryan

5t341tH · 08-27-2021, 06:00 PM

How much for the MVR wastegate?

RedSled · 08-28-2021, 10:17 AM

Don't see the OP responding to anything ,it's like he just set up everyone here ,and more and more just keep asking for a price

~S13 Status~ · 08-28-2021, 11:28 AM

Quote:

Originally Posted by RedSled

Don't see the OP responding to anything ,it's like he just set up everyone here ,and more and more just keep asking for a price

I have already responded to those that msged me or posted before the 26th via PM. Sorry I realized I somehow missed your msg though. Car was pending sale as whole and buyer fell through, engine was pulled yesterday so I'm a bit behind for the newer posts.

Update for those asking about interior I would be willing to sell all the alcantara wrapped interior pieces for 1.6k. Don't want to piece it out, buyer would need to take all.

Also R33 Seats are sold but I have a friend with a set so if you are looking still lmk I believe the price is 1.2K for the pair.

For parts that do not yet have pics they will be up shortly as I'm still removing a few more items

importdude · 08-28-2021, 08:15 PM

still waiting on pm back lmk

asahiyum · 09-01-2021, 06:46 AM

Hi there, might be too new to pm but I'm interested in the rear subframe. Can you pm me with price? I can handle organizing the freight.

sr20boy18 · 09-01-2021, 10:49 PM

How much for hood shipped to 63116 if willing?

~S13 Status~ · 09-02-2021, 05:18 PM

Shell was sold so all exterior/interior parts not listed are gone. (A few extra interior pieces I will have up like a/c and radio trim, etc.)

Yea, sorry I would not have shipped the hood.

List has been updated with parts that are available. Pics missing for just a few items I will have them up tomorrow.

Vin_Spin_S14 · 09-07-2021, 05:30 AM

Sent you a PM regarding the taillights

Sent from my SM-N960U using Tapatalk

jerry_beans · 10-13-2021, 07:42 PM

Do you still have the rack and pinion?!

Trini-GT · 10-13-2021, 09:30 PM

If willing to sell the turbo I am interested.

KBPatel · 10-14-2021, 01:26 AM

If the carbon roof delete is still available I'm interested! Would it fit on an S13 hatch?

iarejon · 10-14-2021, 03:36 PM

I’m located in Miami and I’d like to pick up that sunroof delete asap.

jerry_beans · 10-15-2021, 02:43 AM

I’ll take the steering rack!!

08-21-2021, 09:49 AM	#1
~S13 Status~ Leaky Injector Join Date: Feb 2010 Location: South Fl Age: 35 Posts: 71 Trader Rating: (0) Feedback Score: 0 reviews	S14 Partout - 1998 Kouki Built KA-T W/ Full Race Kit (UPDATED) Was planning on selling my car as a whole, but figured it would be easier to try and let go of some stuff in chunks (Motor / Rolling Chassis). I have a 1998 Kouki with a fully built KA24DET (Full-Race Turbo Kit & GTX3071R). The car is currently running with no problems, has functional A/C and around 4.5k miles on the motor. Long block was built by Mazworx with just about everything they offer (I have all receipts), and parts/build list is listed below. Car made 516 hp / 526 TQ @ 24psi on E60 on a Haltech Elite 1500 and was tuned by Crispeed @ AGautosports. This is an great street setup that makes good power and spools quickly without the lag. If I wasn't needing to let go of all my car related stuff I wouldn't be doing so.. Hopefully someone can enjoy this platform. Prices are negotiable and I'm open to different bundles if you are interested in multiple parts. I listed few bundles to give some ideas. I can send videos upon request & more pics Shell Sold with Wheels Suspension: KW Variant 3 Coilovers SPL Front Tension Rods SPL outer tie rods / Z32 inner SPC Rear Camber / traction arm kit & toe link Subframe - (SPL Solid subframe bushings / GK Tech reinforcement Kit/ powdercoated black) Energy Suspension Differential bushings Z32 Front and Rear brakes Stealth Fab Power Brace Interior: Alcantara (black) w/ red stitching wrapped Dashboard / Center console & lid / Shift Boot Alcantara (black) wrapped Headliner / Sun visors / Front Pillars / Glove box New Black carpet from Stock interiors Street Faction Rear Seat Delete (Powder Coated Black) Rear Plastics intact and not busted and broken Skyline R33 Driver and Passenger Seats no rips and in good condition. Clean Black Kouki Door panels NRG Quick Release Hub Personal Steering Wheel AEM Trim Pot 12 position switch JDM Kouki Cluster 180kph(set to MPH) / Dakota Digital Speedo Garage Moon floor mats Street Faction Fire Ext. mount (Coated Black) Haltech Multi Can Gauge Gizzmo Boost Controller Exterior: Street Faction Chassis Mount Wing & Bash Bar OEM Kouki bumper & side skirts Customer Splitter / Diffuser (Front Bumper / Side skirts / Rear ) VIS Carbon Fiber Vented Hood Wheels - Enkei RPF1's powdercoated - (Front) 18 x 9.5 +15 & (Rear) 18 x 10.5 +15 Tires - Nitto NT05's (About 2k miles) - (Front) 265/35 & (Rear) 285/35 Engine: KA24DET About everything that could be done at Mazworx to a KA.. (I have all receipts just shoot me a msg) Block hot tanked sandblasted decked painted bored .20 over CP pistons 9.0:1 with upgraded wrist pins King Bearings main & rod bearings Arp main studs Crank polished and balanced Crower Rods (not BC) Head: Hot tanked, sand blasted, decked, valve job etc.. Ferrea valvetrain kit : valves / springs / retainers 350z shimless buckets RB26 ARP Headstuds Cosworth Headgasket Kelford 264 cams New OEM Front cover New OEM Timing chain kit Mechanically locked timing chain tensioners ATI damper NiceTime Racing K20 Coil pack bracket (Coated black) K20 Coilpacks Fuel System - (All SS fuel lines back to Fuel Tank / Radium fuel rail / ID 1700x Injectors / Radium High Flow Fuel Filter / AEM Fuel Regulator) Full-Race Turbo kit - (Turbo Manifold - Downpipe - Backdoor Intercooler Setup) Turbo - Garrett GTX3071R .78 Tial Mvr 44mm WG / Tial Q Bov Z32 Transmission mated to an RB25 bellhousing 1 PC driveshaft Z1 Motorsports Z32 short shifter Competition 6 Puck White Bunny Clutch Kit Wiring Specialties Pro Harness (Haltech 1500 / Z32 Trans / Haltech WB / K20 Coils) Haltech Elite 1500 ECU / Flex fuel sensor etc. What is listed below is what is left (A few other misc parts will be added) KA24DE Longblock (Details listed above) includes ATI Damper / Fuel Rail / Starter / PS & AC & Quest Alternator: SOLD Koyo N-flow Radiator w/ shroud and SPAL 14' Fan attached: $250 NiceTime Racing K-Series Coil Pack Bracket (Coated black): $225 (pics to added) Injector Dynamics 1700x Injectors (2.5kish miles on them): $900 (Can be seen in engine pic, did not pull rail yet will add another pic) Street Faction Fire Ext. mount (Coated Black): $80 Injector Dynamics 1050x Injectors (1.5kish miles before my E85 tune): $400 Haltech CAN Gauge $250 (pics to added) Street Faction Chassis Wing & Bash Bar $1,100 (is $1,800 new) Kouki Tail Lights SOLD Kouki USDM Headlights $400 Carbon Fiber Sunroof Delete (Northwind Composites) New never installed $325 Kouki Vertex Lang Kit new and never installed (Front Bumper / Front Fenders / Side Skirts $1,500 S14 Kouki Front Bumper Retainer $50 S14 KA Fan Shroud $40 S14 Okuyama Carbing Front Strut Tower Bar $220 1 Last edited by ~S13 Status~; 09-11-2021 at 08:02 AM.. Reason: new pics and parts

08-27-2021, 06:00 PM	#18
5t341tH Post Whore! Join Date: Jun 2006 Location: socal (Huntington Beach) Age: 36 Posts: 2,787 Trader Rating: (14) Feedback Score: 14 reviews	How much for the MVR wastegate? __________________ lexus baby

08-28-2021, 08:15 PM	#21
importdude Zilvia FREAK! Join Date: Nov 2006 Location: san j0 Posts: 1,391 Trader Rating: (19) Feedback Score: 19 reviews	still waiting on pm back lmk __________________ built ka-t

10-13-2021, 07:42 PM	#26
jerry_beans Zilvia FREAK! Join Date: Oct 2011 Location: El Paso Tejas Posts: 1,007 Trader Rating: (27) Feedback Score: 27 reviews	Do you still have the rack and pinion?! __________________ IG @jerry_beans_

10-15-2021, 02:43 AM	#30
jerry_beans Zilvia FREAK! Join Date: Oct 2011 Location: El Paso Tejas Posts: 1,007 Trader Rating: (27) Feedback Score: 27 reviews	I’ll take the steering rack!! __________________ IG @jerry_beans_

08-21-2021, 10:58 AM	#2
louisrosas00 Join Date: May 2020 Location: Cali Age: 27 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in the seats how much?? Sent from my SM-N975U using Tapatalk

08-21-2021, 01:37 PM	#3
Silv1401 Zilvia Member Join Date: Jan 2019 Location: Vancouver, WA/Portland, OR, USA Posts: 189 Trader Rating: (1) Feedback Score: 1 reviews	PM'd. Sent from my SM-N986U1 using Tapatalk

08-21-2021, 05:58 PM	#4
itsmrgreen Join Date: Oct 2020 Location: NY Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	How much for the dash, center console, shift boot, headliner?

08-21-2021, 06:03 PM	#5
EDacIouSX Post Whore! Join Date: Nov 2004 Location: Los Angeles Age: 39 Posts: 4,566 Trader Rating: (53) Rides Gallery: EDacIouSX Feedback Score: 53 reviews	wow, who did your dash?

08-21-2021, 08:40 PM	#6
RedSled Leaky Injector Join Date: Mar 2007 Location: chilling Posts: 116 Trader Rating: (3) Feedback Score: 3 reviews	Price for haltech multi can gauge ,z32 transmission and the z1 shifter

08-22-2021, 07:22 PM	#11
Nissan2nr22 Nissanaholic! Join Date: Aug 2008 Location: USA Posts: 1,631 Trader Rating: (30) Rides Gallery: Nissan2nr22 Feedback Score: 30 reviews	Hey bud I’m local and I will take a lot of those things I’m sure we can work out a deal Check p.m.

08-23-2021, 07:55 AM	#12
raultheghoul Join Date: Jan 2020 Location: Houston, TX Age: 27 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	im interested in the street faction fire ext mount, how much shipped to 77396?

08-23-2021, 09:20 AM	#13
Silv1401 Zilvia Member Join Date: Jan 2019 Location: Vancouver, WA/Portland, OR, USA Posts: 189 Trader Rating: (1) Feedback Score: 1 reviews	Did you reply to PM's yet? Never got any message back and want to make sure you got mine about the Haltech gauge, and aero. Sent from my SM-N986U1 using Tapatalk

08-23-2021, 07:59 PM	#15
sr20boy18 Leaky Injector Join Date: Apr 2009 Location: saint louis Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	Interested in the hood if your willing to ship lol

08-26-2021, 08:13 AM	#16
4drsleeper Zilvia Member Join Date: May 2010 Location: hollywood, florida Age: 37 Posts: 159 Trader Rating: (2) Feedback Score: 2 reviews	Pm sent about the carpet

08-27-2021, 06:53 AM	#17
Janz99 Leaky Injector Join Date: Mar 2007 Location: Winnipeg, Canada Age: 42 Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	I'm interested in the door panels if your parting out the interior. Shoot me a PM with a price when you get a chance. -Ryan

08-28-2021, 10:17 AM	#19
RedSled Leaky Injector Join Date: Mar 2007 Location: chilling Posts: 116 Trader Rating: (3) Feedback Score: 3 reviews	Don't see the OP responding to anything ,it's like he just set up everyone here ,and more and more just keep asking for a price

09-01-2021, 06:46 AM	#22
asahiyum Join Date: Sep 2021 Location: california Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	Hi there, might be too new to pm but I'm interested in the rear subframe. Can you pm me with price? I can handle organizing the freight.

09-01-2021, 10:49 PM	#23
sr20boy18 Leaky Injector Join Date: Apr 2009 Location: saint louis Posts: 56 Trader Rating: (0) Feedback Score: 0 reviews	How much for hood shipped to 63116 if willing?

09-02-2021, 05:18 PM	#24
~S13 Status~ Leaky Injector Join Date: Feb 2010 Location: South Fl Age: 35 Posts: 71 Trader Rating: (0) Feedback Score: 0 reviews	Shell was sold so all exterior/interior parts not listed are gone. (A few extra interior pieces I will have up like a/c and radio trim, etc.) Yea, sorry I would not have shipped the hood. List has been updated with parts that are available. Pics missing for just a few items I will have them up tomorrow.

09-07-2021, 05:30 AM	#25
Vin_Spin_S14 Join Date: Mar 2019 Location: Red Bank, NJ Posts: 18 Trader Rating: (2) Feedback Score: 2 reviews	Sent you a PM regarding the taillights Sent from my SM-N960U using Tapatalk

10-13-2021, 09:30 PM	#27
Trini-GT Join Date: Jun 2021 Location: Trinidad Posts: 21 Trader Rating: (1) Feedback Score: 1 reviews	If willing to sell the turbo I am interested.

10-14-2021, 01:26 AM	#28
KBPatel Join Date: Nov 2013 Location: Dallas, Texas Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	If the carbon roof delete is still available I'm interested! Would it fit on an S13 hatch?

10-14-2021, 03:36 PM	#29
iarejon Join Date: Oct 2021 Location: Miami, Fl. Age: 39 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	I’m located in Miami and I’d like to pick up that sunroof delete asap.