SR motorsets, NOT clips! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SilviaDriver · 12-28-2004, 09:42 PM

i decided to give up on the KA-T project, but of course i will STILL be making manifolds for the engine, but too many bad dyno charts i dont like coming from KAs. decided to go with SR now

been browsing around for a while now checking sites to what has the lesser priced engines.

phase
jspec
g-deminsion
h-t
touge
etc etc.
venus

most sites only sell clips...clips are way too epxenisve. i know the downside to having a clip vs motorset is, you get everything undamaged like oilpan etc etc and you have a good referece where shit is gonna be placed. but then you have all that crap left over a junkyard wont take. of course you can sell it but i dont have time for that crap. hence why i chose motorset.

any place besides heavy-throttle that sells COMPLETE motorsets. in other words, a motorset that has everything i need to make my car running

remember looking for MOTORSETS not CLIPS

**mrmephistopheles** · 12-28-2004, 09:49 PM

I know Jspec has (at least in the past) stripped the clip of all necessary parts for customers.
In essence, you're still paying for the whole shebang, but of course you're getting everything and not having to worry about clip disposal. I'm not sure if Sam still does this or what...

ace240sx · 12-28-2004, 10:11 PM

I got my motorset form www.osakajdmmotors.com, but some ppl have bad stories from there. My maf that came with the motorset was faulty, and osaka sent me a new one.

TokyoNights · 12-28-2004, 10:11 PM

Ill have some good kat dyno charts this spring

Anyways jgycustoms is a great place to deal with and has complete motorsets but you will still need to buy a intercooler and e fan.

Flybert · 12-29-2004, 02:16 AM

I got my motorset from phase2 with the prep package and the pre-order discount. I went down and handpicked my motor from the 12 motorsets they had there. If I were you, I'd bring a pickup truck down and bring your motor back to norcal rather than shipping because you can choose your motor.

TheTicTac · 12-29-2004, 04:30 AM

If you want a motorset I have one, and I'm in milpitas so you don't have to drive 6hrs. I pretty much get my motors from the same place every major distributors get them.

Siizzzoooo · 12-29-2004, 09:55 AM

go with phase 2

*HaLo* · 12-29-2004, 12:45 PM

Quote:

Originally Posted by ace240sx

I got my motorset form www.osakajdmmotors.com, but some ppl have bad stories from there. My maf that came with the motorset was faulty, and osaka sent me a new one.

If you guys want motorsets from them, I can scout the engines first... I live close to them... and locally, the engines are much cheaper.

Heartwork · 12-29-2004, 01:19 PM

Quote:

Originally Posted by TheTicTac

If you want a motorset I have one, and I'm in milpitas so you don't have to drive 6hrs. I pretty much get my motors from the same place every major distributors get them.

i was gonna say Gorgeous Garage...
one readily availabe

RBS14 · 12-29-2004, 01:36 PM

hahahahaha

too many bad kat dynos? That's because of the idiots putting them together, not the engines. People act like ka's are so unpredictable, and they are all different and unreliable. The bottom line is that If one makes good power with a good setup, every other ka would too, with the same setup. It's all about matching the turbine with the engine (which most people have no idea how to do, which yields low hp numbers and more lag than necessary) and making a fuel system that works effectively with the engine AND turbo. Save for cams, every ka is the same. It's not like we are dealing with 10 different types of engines that all react differently to modifications.

The other thing to keep in mind, is that if someone turbo'd an old beatup ka, it's never going to make the kind of power that a ka in good condition would. That is also a big factor that people ignore.

Think about it and you'll get it. If not, you need a new hobby.

And if you look, you'll find bad sr dyons too. I've seen plenty of them.

SilviaDriver · 12-29-2004, 03:08 PM

ive gone for SR in my car now, and using my old engine as mock ups for manifolds. so in reality i will be building two engines.

drftwerks · 12-29-2004, 03:27 PM

Quote:

Originally Posted by TheTicTac

If you want a motorset I have one, and I'm in milpitas so you don't have to drive 6hrs. I pretty much get my motors from the same place every major distributors get them.

Yea andy's got the ISH, Gorgeous Garage all the way, ultra cool guy, w/ hella stuff.

Flybert · 12-29-2004, 03:29 PM

Speaking of bad SR dynos. Just saw an S15 SR put down 165 whp. Damn, better switch back to KA.

SilviaDriver · 12-29-2004, 05:53 PM

Quote:

Originally Posted by HaLo

If you guys want motorsets from them, I can scout the engines first... I live close to them... and locally, the engines are much cheaper.

shipping it to the us might be a problem with customs? i heard of this place a while back but didnt it have bad reviews?

rps13sh · 12-29-2004, 06:54 PM

for SoCAL people, i know a small motor importer in stanton that has great prices for motorsets. i got mine from there and have had no problems. good prices too. its a shop i do business with so i got a good deal but i think thier regular prices are like $1500 for redtop, $1600 blacktop. dont quote me on that but check it out. they have everything from SR20DE/T, 4AGE, and a bunch of honda and mitsu motors. if you want more info hit me up on AIM - rps13sh

tell them C.Y. from BEST TINT referred you and they might hook you up *wink

psychedelicbeats · 12-29-2004, 07:01 PM

are you speaking of jer

rps13sh · 12-29-2004, 07:44 PM

what is JER?

psychedelicbeats · 12-30-2004, 03:02 AM

"japanese engine repair", off of garden grove and beach... i guess that's not it. where's this place at?

nismoconvert · 12-30-2004, 09:27 AM

Damn why wasn't any of this stuff there when I lived in Garden Grove.

*HaLo* · 12-30-2004, 10:24 AM

Quote:

Originally Posted by SilviaDriver

shipping it to the us might be a problem with customs? i heard of this place a while back but didnt it have bad reviews?

It did... that's why I offered to check em out first.

My first engine came from them, I paid 1400$ cdn for a S13 Blacktop... it lasted 20 000km...

I'm on my second engine now.

90sr · 12-30-2004, 11:00 AM

i picked up my s13 redtop from Frank over at ardperformance in san diego, guy was really chill, i got everything extra set a coils and a maf, he also sent me a pair of ngk plugs got one with intercooler and piping, runs perfect now. good luck.

chris

blitz180 · 12-31-2004, 05:26 AM

Try www.passwordjdm.com
we visited them while we were in cali for JGTC they are cool. Shipping i dunno might be higher, but they had a GOOD condition clip for 2100. Not bad for a redtop front clip. All their stuff looks to be in good shape, as we have been in the back room to personally pick our stuff out. Call and talk to them... they might uninstall it and make a motorset for you.

12-28-2004, 09:42 PM	#1
SilviaDriver Post Whore! Join Date: Jun 2002 Location: San Jose, CA Age: 40 Posts: 5,514 Trader Rating: (2) Rides Gallery: SilviaDriver Feedback Score: 2 reviews	SR motorsets, NOT clips! i decided to give up on the KA-T project, but of course i will STILL be making manifolds for the engine, but too many bad dyno charts i dont like coming from KAs. decided to go with SR now been browsing around for a while now checking sites to what has the lesser priced engines. phase jspec g-deminsion h-t touge etc etc. venus most sites only sell clips...clips are way too epxenisve. i know the downside to having a clip vs motorset is, you get everything undamaged like oilpan etc etc and you have a good referece where shit is gonna be placed. but then you have all that crap left over a junkyard wont take. of course you can sell it but i dont have time for that crap. hence why i chose motorset. any place besides heavy-throttle that sells COMPLETE motorsets. in other words, a motorset that has everything i need to make my car running remember looking for MOTORSETS not CLIPS

12-28-2004, 10:11 PM	#3
ace240sx Leaky Injector Join Date: Nov 2003 Location: usa Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	I got my motorset form www.osakajdmmotors.com, but some ppl have bad stories from there. My maf that came with the motorset was faulty, and osaka sent me a new one. __________________ "we endorse beating kids faces in as soon as probation is over and we relocate back to so cal"

12-29-2004, 04:30 AM	#6
TheTicTac Zilvia Junkie Join Date: May 2002 Location: CA Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	If you want a motorset I have one, and I'm in milpitas so you don't have to drive 6hrs. I pretty much get my motors from the same place every major distributors get them. __________________ GorgeousGarage L.oose S.ocks D.aisuke !

12-29-2004, 09:55 AM	#7
Siizzzoooo Zilvia FREAK! Join Date: Feb 2002 Location: Murfreesboro,TN Posts: 1,355 Trader Rating: (0) Feedback Score: 0 reviews	go with phase 2 __________________ 2004 Honda S2000 NFR \| 2007 Acura TL CBP \| Project *Coming Soon*

12-29-2004, 01:36 PM	#10
RBS14 Nissanaholic! Join Date: Feb 2003 Location: Santa Cruz/San Diego Posts: 2,271 Trader Rating: (0) Feedback Score: 0 reviews	hahahahaha too many bad kat dynos? That's because of the idiots putting them together, not the engines. People act like ka's are so unpredictable, and they are all different and unreliable. The bottom line is that If one makes good power with a good setup, every other ka would too, with the same setup. It's all about matching the turbine with the engine (which most people have no idea how to do, which yields low hp numbers and more lag than necessary) and making a fuel system that works effectively with the engine AND turbo. Save for cams, every ka is the same. It's not like we are dealing with 10 different types of engines that all react differently to modifications. The other thing to keep in mind, is that if someone turbo'd an old beatup ka, it's never going to make the kind of power that a ka in good condition would. That is also a big factor that people ignore. Think about it and you'll get it. If not, you need a new hobby. And if you look, you'll find bad sr dyons too. I've seen plenty of them. __________________

12-28-2004, 10:11 PM	#4
TokyoNights Zilvia FREAK! Join Date: Dec 2002 Location: garage Age: 42 Posts: 1,215 Trader Rating: (2) Rides Gallery: TokyoNights Feedback Score: 2 reviews	Ill have some good kat dyno charts this spring Anyways jgycustoms is a great place to deal with and has complete motorsets but you will still need to buy a intercooler and e fan.

12-29-2004, 02:16 AM	#5
Flybert Post Whore! Join Date: Mar 2003 Location: none Posts: 3,862 Trader Rating: (7) Feedback Score: 7 reviews	I got my motorset from phase2 with the prep package and the pre-order discount. I went down and handpicked my motor from the 12 motorsets they had there. If I were you, I'd bring a pickup truck down and bring your motor back to norcal rather than shipping because you can choose your motor.

12-29-2004, 03:08 PM	#11
SilviaDriver Post Whore! Join Date: Jun 2002 Location: San Jose, CA Age: 40 Posts: 5,514 Trader Rating: (2) Rides Gallery: SilviaDriver Feedback Score: 2 reviews	ive gone for SR in my car now, and using my old engine as mock ups for manifolds. so in reality i will be building two engines.

12-29-2004, 03:29 PM	#13
Flybert Post Whore! Join Date: Mar 2003 Location: none Posts: 3,862 Trader Rating: (7) Feedback Score: 7 reviews	Speaking of bad SR dynos. Just saw an S15 SR put down 165 whp. Damn, better switch back to KA.

12-29-2004, 06:54 PM	#15
rps13sh Zilvia FREAK! Join Date: Aug 2003 Location: Cerritos, CA Posts: 1,098 Trader Rating: (0) Feedback Score: 0 reviews	for SoCAL people, i know a small motor importer in stanton that has great prices for motorsets. i got mine from there and have had no problems. good prices too. its a shop i do business with so i got a good deal but i think thier regular prices are like $1500 for redtop, $1600 blacktop. dont quote me on that but check it out. they have everything from SR20DE/T, 4AGE, and a bunch of honda and mitsu motors. if you want more info hit me up on AIM - rps13sh tell them C.Y. from BEST TINT referred you and they might hook you up *wink

12-29-2004, 07:01 PM	#16
psychedelicbeats Zilvia Addict Join Date: May 2003 Location: Southern CA Age: 40 Posts: 823 Trader Rating: (0) Feedback Score: 0 reviews	are you speaking of jer

12-29-2004, 07:44 PM	#17
rps13sh Zilvia FREAK! Join Date: Aug 2003 Location: Cerritos, CA Posts: 1,098 Trader Rating: (0) Feedback Score: 0 reviews	what is JER?

12-30-2004, 03:02 AM	#18
psychedelicbeats Zilvia Addict Join Date: May 2003 Location: Southern CA Age: 40 Posts: 823 Trader Rating: (0) Feedback Score: 0 reviews	"japanese engine repair", off of garden grove and beach... i guess that's not it. where's this place at?

12-30-2004, 09:27 AM	#19
nismoconvert Join Date: Aug 2004 Location: Mt Washington Age: 45 Posts: 16 Trader Rating: (0) Feedback Score: 0 reviews	Damn why wasn't any of this stuff there when I lived in Garden Grove.

12-30-2004, 11:00 AM	#21
90sr Zilvia Member Join Date: Dec 2003 Location: toms river, new jersey Age: 40 Posts: 200 Trader Rating: (0) Feedback Score: 0 reviews	i picked up my s13 redtop from Frank over at ardperformance in san diego, guy was really chill, i got everything extra set a coils and a maf, he also sent me a pair of ngk plugs got one with intercooler and piping, runs perfect now. good luck. chris __________________ chris's sr

12-31-2004, 05:26 AM	#22
blitz180 Zilvia Member Join Date: Aug 2003 Location: Usa-shi, Oita-ken, Japan Age: 42 Posts: 169 Trader Rating: (0) Feedback Score: 0 reviews	Try www.passwordjdm.com we visited them while we were in cali for JGTC they are cool. Shipping i dunno might be higher, but they had a GOOD condition clip for 2100. Not bad for a redtop front clip. All their stuff looks to be in good shape, as we have been in the back room to personally pick our stuff out. Call and talk to them... they might uninstall it and make a motorset for you.