16x7 wheel offset ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

guy · 05-10-2002, 01:46 PM

What offset do i need?  I found some that I want and they are 40 offset.  Would these work?

240meowth · 05-10-2002, 02:53 PM

+40mm will fit your car, but if you are looking for a "flush" look go w/ +35mm or +32 for more fun

guy · 05-10-2002, 04:26 PM

Thanks for the advise.  How much more "flush" would a +35 or +32 be.  Is this measured in mm?  If it is, would it be 5-7mm more towards the outside, and therefore more wheelbase?  Sorry for these questions but i am on the run and can't investigate this now.

240meowth · 05-10-2002, 04:36 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (guy @ May 10 2002,3:26)</td></tr><tr><td id="QUOTE">Thanks for the advise. How much more "flush" would a +35 or +32 be. Is this measured in mm? If it is, would it be 5-7mm more towards the outside, and therefore more wheelbase? Sorry for these questions but i am on the run and can't investigate this now.</td></tr></table><span id='postcolor'>
the smaller the offset (in mm) the further it will be out, towards the fender/body

05-10-2002, 02:53 PM	#2
240meowth Nissanaholic! Join Date: Dec 2001 Location: torrance, ca Age: 41 Posts: 2,407 Trader Rating: (4) Feedback Score: 4 reviews	+40mm will fit your car, but if you are looking for a "flush" look go w/ +35mm or +32 for more fun __________________

05-10-2002, 04:36 PM	#4
240meowth Nissanaholic! Join Date: Dec 2001 Location: torrance, ca Age: 41 Posts: 2,407 Trader Rating: (4) Feedback Score: 4 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (guy @ May 10 2002,3:26)</td></tr><tr><td id="QUOTE">Thanks for the advise. How much more "flush" would a +35 or +32 be. Is this measured in mm? If it is, would it be 5-7mm more towards the outside, and therefore more wheelbase? Sorry for these questions but i am on the run and can't investigate this now.</td></tr></table><span id='postcolor'> the smaller the offset (in mm) the further it will be out, towards the fender/body __________________

05-10-2002, 01:46 PM	#1
guy Join Date: Apr 2002 Location: Madison, WI Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	What offset do i need?  I found some that I want and they are 40 offset.  Would these work?

05-10-2002, 04:26 PM	#3
guy Join Date: Apr 2002 Location: Madison, WI Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the advise.  How much more "flush" would a +35 or +32 be.  Is this measured in mm?  If it is, would it be 5-7mm more towards the outside, and therefore more wheelbase?  Sorry for these questions but i am on the run and can't investigate this now.