Megan Coilover- dampening/Installation question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ped · 03-27-2006, 12:50 AM

Hey guys

before i installed the coilovers, my idiot friend played with the dampening settings

... now i'm not sure what the stock dampening was originally set to..in any case I heard u have to break them in, is this true ?

If so am I supposed to let the coilovers break in at the dampening they were originally set to (which i have no idea, what they were), or just throw them on adjust them to any setting and drive ...

thanks
-Ped

*Sonic Motor* · 03-27-2006, 01:50 AM

just put it on the stiffest and once you getten used to the stiff ride, go soft. Then they will be broken in

g6civcx · 03-27-2006, 03:56 AM

You're supposed to set it on the softest setting and drive it around for a week or so to seat the springs. Then adjust to taste.

!Zar! · 03-27-2006, 10:25 AM

There shouldn't be any need to break in the springs. Just set and change them to your liking. The springs seat onece you lower your car and push down on each corner once or twice.

03-27-2006, 12:50 AM	#1
ped Join Date: May 2005 Location: North York Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Megan Coilover- dampening/Installation question Hey guys before i installed the coilovers, my idiot friend played with the dampening settings ... now i'm not sure what the stock dampening was originally set to..in any case I heard u have to break them in, is this true ? If so am I supposed to let the coilovers break in at the dampening they were originally set to (which i have no idea, what they were), or just throw them on adjust them to any setting and drive ... thanks -Ped

03-27-2006, 01:50 AM	#2
Sonic Motor www.SonicMotor.com Join Date: Aug 2005 Location: 4981 N Irwindale Ave #100, Irwindale, CA Posts: 9,481 Trader Rating: (113) Feedback Score: 113 reviews	just put it on the stiffest and once you getten used to the stiff ride, go soft. Then they will be broken in __________________ Sonicmotor.com \| Zach @ Sonic Motor \| 626.363.9036 \| [email protected] Check out our website! ( CLICK )

03-27-2006, 10:25 AM	#4
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	There shouldn't be any need to break in the springs. Just set and change them to your liking. The springs seat onece you lower your car and push down on each corner once or twice. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2006, 03:56 AM	#3
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	You're supposed to set it on the softest setting and drive it around for a week or so to seat the springs. Then adjust to taste.