how to tell if tps is adjusted at 100% throttle w/o safc? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Indolent · 06-14-2006, 02:53 AM

my tps has been moved, i don't have an safc or anything to tell if my tps is say at WOT/100%, is there a way to adjust the tps w/o say for example an safc, just want to know how to adjusted the tps right the way it should be

R34SKYLINE · 06-14-2006, 03:12 AM

Digital Volt Meter

orion::S14 · 06-14-2006, 07:34 AM

^^^ Yep.

Look for ~0.40-0.50 volts when closed (key in the ON position)...and +4volts when held wide open.

Check an FSM to see which 2 wires to probe.

- Brian

06-14-2006, 02:53 AM	#1
Indolent Zilvia FREAK! Join Date: Jun 2005 Location: So. Cal, Riverside Area Posts: 1,110 Trader Rating: (3) Feedback Score: 3 reviews	how to tell if tps is adjusted at 100% throttle w/o safc? my tps has been moved, i don't have an safc or anything to tell if my tps is say at WOT/100%, is there a way to adjust the tps w/o say for example an safc, just want to know how to adjusted the tps right the way it should be

06-14-2006, 07:34 AM	#3
orion::S14 Nissanaholic! Join Date: May 2003 Location: Orange Park, FL Posts: 1,666 Trader Rating: (0) Feedback Score: 0 reviews	^^^ Yep. Look for ~0.40-0.50 volts when closed (key in the ON position)...and +4volts when held wide open. Check an FSM to see which 2 wires to probe. - Brian __________________ www.KA24DEvelopment.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2006, 03:12 AM	#2
R34SKYLINE Leaky Injector Join Date: May 2006 Location: Socal Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	Digital Volt Meter