Zauber Wheels? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

staygold24 · 09-21-2006, 08:37 PM

Hey I saw some zauber mesh wheels and was wondering how they would fit on a 240sx and if anyone had any pictures of them, preferrably on a s14. Sizes are 17x8+29, 17x9+36. Thanks guys

ayuaddict · 09-21-2006, 09:09 PM

yeaaa...those sizes will technically fit, whats the PCD and bolt pattern?

staygold24 · 09-21-2006, 09:34 PM

its a universal 4 or 5 lug. its more of a vip wheel ive heard and I searched zilvia and theyr only mentioned twice. Seem to look good to me though and look 3 piece.

backroadtouge · 09-21-2006, 10:50 PM

well after 1 minute on google (seriously) i found Zauber has about 3 different 3piece rims, adn vip dish faced adn a sorta volk mesh looking ones. 5x114.3 adn some euro.. so which one ya looking at?

**mrmephistopheles** · 09-21-2006, 11:04 PM

if you're looking at dish wheels, those offsets will SUCK for dish depth. you *might* get 1" in the rear.
That sizing is much more common for the mesh wheels that they make.

For those wheels, *I* would run a 25mm spacer.

!Zar! · 09-21-2006, 11:17 PM

Zauber has some nice wheels, and are more common in the vip scene.

They will, "fit". But they won't be anywhere near flush.

But if you are going to purchace some, make sure to find the pcd. You're is either 4x114.3 or 5x114.3

staygold24 · 09-22-2006, 10:50 AM

They are only listed as zauber so I really dont know what the model name is. Also I was deffinately gonna run some spacers. The pcd is boht 4 and 5x114.3. http://rbmotoring.com/gallery/album315/aaa That is where Im planning to buy em from. Also provides some pictures of the wheel.

TheSquidd · 09-22-2006, 11:44 AM

You could stack two of them in the back, run a dualie setup, then you might be near flush

staygold24 · 09-22-2006, 01:41 PM

haha dont worry bout that spacers will be installed before I would get these. My 17x7s and honda offsets are killing me. Like the pics?

TheSquidd · 09-22-2006, 01:57 PM

Quote:

Originally Posted by staygold24

Like the pics?

Not really. And spacers wont change the fact there is no lip on them.

staygold24 · 09-22-2006, 03:11 PM

I know they wont change the lip, I still like them though and are probably the best rims in my price range with best quality and lip for below a grand. Thanks for the opinions though. If you can find any better looking wheels with more lip in four lug below a grand let me know.

staygold24 · 09-25-2006, 04:02 PM

anybody else? suggestions? any pictures on a car?

09-21-2006, 08:37 PM	#1
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	Zauber Wheels? Hey I saw some zauber mesh wheels and was wondering how they would fit on a 240sx and if anyone had any pictures of them, preferrably on a s14. Sizes are 17x8+29, 17x9+36. Thanks guys

09-21-2006, 10:50 PM	#4
backroadtouge Zilvia Member Join Date: Sep 2006 Location: TEXAS Posts: 217 Trader Rating: (0) Feedback Score: 0 reviews	well after 1 minute on google (seriously) i found Zauber has about 3 different 3piece rims, adn vip dish faced adn a sorta volk mesh looking ones. 5x114.3 adn some euro.. so which one ya looking at? __________________ お金も腕も、何も無い・

09-21-2006, 11:17 PM	#6
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	Zauber has some nice wheels, and are more common in the vip scene. They will, "fit". But they won't be anywhere near flush. But if you are going to purchace some, make sure to find the pcd. You're is either 4x114.3 or 5x114.3 __________________

09-22-2006, 11:44 AM	#8
TheSquidd Post Whore! Join Date: Nov 2004 Location: Where dirt goes to die. Posts: 3,165 Trader Rating: (7) Rides Gallery: TheSquidd Feedback Score: 7 reviews	You could stack two of them in the back, run a dualie setup, then you might be near flush __________________ www.squidd.org www.violent-running.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2006, 09:09 PM	#2
ayuaddict Post Whore! Join Date: Jan 2006 Location: Socal Age: 36 Posts: 4,017 Trader Rating: (9) Feedback Score: 9 reviews	yeaaa...those sizes will technically fit, whats the PCD and bolt pattern?

09-21-2006, 09:34 PM	#3
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	its a universal 4 or 5 lug. its more of a vip wheel ive heard and I searched zilvia and theyr only mentioned twice. Seem to look good to me though and look 3 piece.

09-22-2006, 10:50 AM	#7
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	They are only listed as zauber so I really dont know what the model name is. Also I was deffinately gonna run some spacers. The pcd is boht 4 and 5x114.3. http://rbmotoring.com/gallery/album315/aaa That is where Im planning to buy em from. Also provides some pictures of the wheel.

09-22-2006, 01:41 PM	#9
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	haha dont worry bout that spacers will be installed before I would get these. My 17x7s and honda offsets are killing me. Like the pics?

09-22-2006, 03:11 PM	#11
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	I know they wont change the lip, I still like them though and are probably the best rims in my price range with best quality and lip for below a grand. Thanks for the opinions though. If you can find any better looking wheels with more lip in four lug below a grand let me know.

09-25-2006, 04:02 PM	#12
staygold24 Zilvia Addict Join Date: Aug 2005 Location: St. Simons Ga Posts: 673 Trader Rating: (0) Feedback Score: 0 reviews	anybody else? suggestions? any pictures on a car?