Need some Advice

[silversr]

Okay heres the deal, My sr20 is flooding and I already checked to see if the o-rings are bad which they aren't. I put new plugs in and it started right up and idled at like 2000rpm but once I tap on the gas pedal it revs up really slow then it just dies out.I go check out the plugs and they are fouled again,I'm pretty sure the wiring for the z32 mafs is correct because I followed bjyorks writeup.I'm just gathering some info before I go work on it again. The rest of my setup is 740cc injectors,enthalpy ecu and of course the z32 maf.