problems with s14 sr greddy RAS - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slideways2004 · 02-27-2007, 11:52 PM

last weekend i was trying to put on greddy rocker arm stoppers on my s14 sr. after shaving a bunch of valve cover and even the ras themselves, it still wouldn't fit. was i doing something wrong?

how safe is it to tap teh rev limiter w/o them? is it only a big problem is redtop sr's or all of them?

spdfreek0o · 02-28-2007, 08:55 AM

http://www.zeroyon.com/index/content/view/26/47/
thats a good write-up, if you followed that then you should be fine.

slideways2004 · 02-28-2007, 12:51 PM

i actually did follow that. but now thinnkng about it, i think we installed them wrong because of this- before we did any test fitting, we cut out the peice out the valve cover before checking anything. when we test fitted, the peice we cut out didn't even need to be cutout. so we prolly put them on wrong. can someone post a bigger/more detailed picture of how they should be.

02-27-2007, 11:52 PM	#1
slideways2004 Nissanaholic! Join Date: Apr 2005 Location: Houston Age: 38 Posts: 1,706 Trader Rating: (6) Feedback Score: 6 reviews	problems with s14 sr greddy RAS last weekend i was trying to put on greddy rocker arm stoppers on my s14 sr. after shaving a bunch of valve cover and even the ras themselves, it still wouldn't fit. was i doing something wrong? how safe is it to tap teh rev limiter w/o them? is it only a big problem is redtop sr's or all of them?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2007, 12:51 PM	#3
slideways2004 Nissanaholic! Join Date: Apr 2005 Location: Houston Age: 38 Posts: 1,706 Trader Rating: (6) Feedback Score: 6 reviews	i actually did follow that. but now thinnkng about it, i think we installed them wrong because of this- before we did any test fitting, we cut out the peice out the valve cover before checking anything. when we test fitted, the peice we cut out didn't even need to be cutout. so we prolly put them on wrong. can someone post a bigger/more detailed picture of how they should be.