Rim question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BadMoJo · 02-01-2002, 06:30 PM

I have a ?  my 95 is 4 lug, I am gonna do the 5 lug conversion down the road, but I will have to buy rims at the same time(cuz new lug setup).  But until then I kinda what to get rid of the shitty lookin stock rims. So, is there any rims that have a universal lug setup (the ones with a bunch of holes and stuff..) <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>  that would fit both the 4 AND the 5 lug setup?  or should i just stick it out until I do the swap and look for some Z rims for cheap??

White240sx · 02-01-2002, 08:00 PM

If you find wheels you like in 4-lug, why switch to the 5-lug? I fail to see the reasoning here.

Nismos14 · 02-01-2002, 08:50 PM

they have such rims but they are expensive and they are a pain in the ass to find so good luck i'd say just wait as long as u can

BadMoJo · 02-02-2002, 01:15 AM

White240sx -  I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug.

Archangel · 02-02-2002, 01:34 AM

I did alot of looking into the 5-lug conversion versus sticking with the 4-lugs.
Remember most civics and integras (lower models of both) are 4 lugs. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> There are alot of nice rims out there in a 4 lug, you just have to look around alot.
The only other reason to go 5 lug is brake upgrades. PDM racing (<a href="http://www.pdm-racing.com/products/brakesz32.html" target='_blank'>http://www.pdm-racing.com/products/brakesz32.html</a>) will predrill aftermarket 300zx rotors to fit a 4 lug. Check them out.
On top of those facts, i had alot of trouble finding a 5-lug hub replacement or a wrecked s14 SE or LE to steal them from.:angry:

*Grant* · 02-02-2002, 02:19 AM

found the kosei pina f1's for $50 a piece new, 16x7.5 , too bad only 3 rims left <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>.

They were 4x114.3 and 5x114.3. I guess you just have too look around until you find a good deal.

(Edited by Grant at 2<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>9 am on Feb. 2, 2002)

rampid360 · 02-02-2002, 11:28 AM

well..if you aren't looking for rims that you'll keep forever...and just want a universal that is better then ugly stock,  try sears.    Yes, sears.   they sell universal wheels that are less then hideous and usually dirt cheap.

White240sx · 02-02-2002, 05:33 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BadMoJo on 1:15 am on Feb. 2, 2002
White240sx - I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug.
</td></tr></table><span id='postcolor'>

I'm just wondering why they need to be 9-hole wheels though. Why do they need to be able to fit the 5-lug pattern if you are getting different wheels for the 5-lug set-up as it is?

Which wheels do you have now? The steelies or the mesh looking/G20 type alloy? You can pull your wheel covers and clean off the black steels, they won’t look half bad if getting rid of the wheel covers is the goal.

Nismos14 · 02-02-2002, 07:49 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from White240sx on 7:33 pm on Feb. 2, 2002
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BadMoJo on 1:15 am on Feb. 2, 2002
White240sx - I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug.
</td></tr></table><span id='postcolor'>

I'm just wondering why they need to be 9-hole wheels though. Why do they need to be able to fit the 5-lug pattern if you are getting different wheels for the 5-lug set-up as it is?

Which wheels do you have now? The steelies or the mesh looking/G20 type alloy? You can pull your wheel covers and clean off the black steels, they won’t look half bad if getting rid of the wheel covers is the goal.
</td></tr></table><span id='postcolor'>

hes not going 5-lug for a while but he wants to get rid of the ugly rims cuz hes sick of it now, IMO, right? so thats the reason

BadMoJo · 02-02-2002, 08:57 PM

yup, you said it Nismo. I have the ghetto mesh type i guess you could say. And I would change rims right away if I got some OK lookin universal ones. I think it would just be a nice quick fix for the "looks" department and when I do the swap it wont be a problem getting differnt rims cuz they will still fit.

xNotoriousGQx · 02-03-2002, 11:53 AM

Try Racing Hart wheels.  Most has both 4 and 5 lug set up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2002, 06:30 PM	#1
BadMoJo Nissanaholic! Join Date: Sep 2001 Location: San Luis Obispo, Ca Age: 43 Posts: 1,931 Trader Rating: (0) Feedback Score: 0 reviews	I have a ?  my 95 is 4 lug, I am gonna do the 5 lug conversion down the road, but I will have to buy rims at the same time(cuz new lug setup).  But until then I kinda what to get rid of the shitty lookin stock rims. So, is there any rims that have a universal lug setup (the ones with a bunch of holes and stuff..) <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>  that would fit both the 4 AND the 5 lug setup?  or should i just stick it out until I do the swap and look for some Z rims for cheap??

02-01-2002, 08:00 PM	#2
White240sx Zilvia Member Join Date: Nov 2001 Posts: 219 Trader Rating: (0) Feedback Score: 0 reviews	If you find wheels you like in 4-lug, why switch to the 5-lug? I fail to see the reasoning here.

02-01-2002, 08:50 PM	#3
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 44 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	they have such rims but they are expensive and they are a pain in the ass to find so good luck i'd say just wait as long as u can

02-02-2002, 01:15 AM	#4
BadMoJo Nissanaholic! Join Date: Sep 2001 Location: San Luis Obispo, Ca Age: 43 Posts: 1,931 Trader Rating: (0) Feedback Score: 0 reviews	White240sx -  I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug.

02-02-2002, 01:34 AM	#5
Archangel Zilvia Junkie Join Date: Sep 2001 Location: Cincinnati, OH Posts: 425 Trader Rating: (0) Feedback Score: 0 reviews	I did alot of looking into the 5-lug conversion versus sticking with the 4-lugs. Remember most civics and integras (lower models of both) are 4 lugs. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> There are alot of nice rims out there in a 4 lug, you just have to look around alot. The only other reason to go 5 lug is brake upgrades. PDM racing (<a href="http://www.pdm-racing.com/products/brakesz32.html" target='_blank'>http://www.pdm-racing.com/products/brakesz32.html</a>) will predrill aftermarket 300zx rotors to fit a 4 lug. Check them out. On top of those facts, i had alot of trouble finding a 5-lug hub replacement or a wrecked s14 SE or LE to steal them from.:angry:

02-02-2002, 02:19 AM	#6
Grant Premium Member Join Date: Jun 2001 Location: 聖地牙哥 Posts: 2,647 Trader Rating: (0) Rides Gallery: Grant Feedback Score: 0 reviews	found the kosei pina f1's for $50 a piece new, 16x7.5 , too bad only 3 rims left <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>. They were 4x114.3 and 5x114.3. I guess you just have too look around until you find a good deal. (Edited by Grant at 2<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>9 am on Feb. 2, 2002)

02-02-2002, 11:28 AM	#7
rampid360 Zilvia Junkie Join Date: Jan 2002 Posts: 328 Trader Rating: (0) Feedback Score: 0 reviews	well..if you aren't looking for rims that you'll keep forever...and just want a universal that is better then ugly stock,  try sears.    Yes, sears.   they sell universal wheels that are less then hideous and usually dirt cheap.

02-02-2002, 05:33 PM	#8
White240sx Zilvia Member Join Date: Nov 2001 Posts: 219 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BadMoJo on 1:15 am on Feb. 2, 2002 White240sx - I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug. </td></tr></table><span id='postcolor'> I'm just wondering why they need to be 9-hole wheels though. Why do they need to be able to fit the 5-lug pattern if you are getting different wheels for the 5-lug set-up as it is? Which wheels do you have now? The steelies or the mesh looking/G20 type alloy? You can pull your wheel covers and clean off the black steels, they won’t look half bad if getting rid of the wheel covers is the goal.

02-02-2002, 07:49 PM	#9
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 44 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from White240sx on 7:33 pm on Feb. 2, 2002 </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from BadMoJo on 1:15 am on Feb. 2, 2002 White240sx - I am not really looking for a rim that I am gonna stick with, and it seems that there is a better selection of rims in 5-lug. I an just looking for something that will be better than the ugly ass stock rims, something cheap and simple. Like some 16x7s or something. I dont even care if They dont look that hot, ANYTHING is better than what i have right now. But it seems that the best way to go is to just stick it out and get rims when I go 5 lug. </td></tr></table><span id='postcolor'> I'm just wondering why they need to be 9-hole wheels though. Why do they need to be able to fit the 5-lug pattern if you are getting different wheels for the 5-lug set-up as it is? Which wheels do you have now? The steelies or the mesh looking/G20 type alloy? You can pull your wheel covers and clean off the black steels, they won’t look half bad if getting rid of the wheel covers is the goal. </td></tr></table><span id='postcolor'> hes not going 5-lug for a while but he wants to get rid of the ugly rims cuz hes sick of it now, IMO, right? so thats the reason

02-02-2002, 08:57 PM	#10
BadMoJo Nissanaholic! Join Date: Sep 2001 Location: San Luis Obispo, Ca Age: 43 Posts: 1,931 Trader Rating: (0) Feedback Score: 0 reviews	yup, you said it Nismo. I have the ghetto mesh type i guess you could say. And I would change rims right away if I got some OK lookin universal ones. I think it would just be a nice quick fix for the "looks" department and when I do the swap it wont be a problem getting differnt rims cuz they will still fit.

02-03-2002, 11:53 AM	#11
xNotoriousGQx Zilvia Junkie Join Date: Oct 2001 Location: NYC Posts: 447 Trader Rating: (0) Feedback Score: 0 reviews	Try Racing Hart wheels.  Most has both 4 and 5 lug set up.