Brake Master is filled with air bubbles WTF??.. lol - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chrischeezer · 05-23-2007, 08:22 PM

91 ABS s13

aight so i swap on r33 calipers, with conversion lines..

i gravity bled them the first time.. and they felt ok... but not 100% perfect. i then bled them normaly.. and the pedal dies.. dead... no pressure
then i relized their was air bubbles coming from the MC, as if u put a straw in it, and then blew bubbles, every time the pedal was pressed. (bubbles never end)

i cant bled the system out, i dont know what the problem is.. i tryed bleeding them out for an hour.. nothing, the MC makes FOAM! mad Air!.. i have never seen anything like it..

any ideas?

05-23-2007, 08:22 PM	#1
Chrischeezer Zilvia FREAK! Join Date: Jul 2005 Location: earth Age: 41 Posts: 1,406 Trader Rating: (2) Feedback Score: 2 reviews	Brake Master is filled with air bubbles WTF??.. lol 91 ABS s13 aight so i swap on r33 calipers, with conversion lines.. i gravity bled them the first time.. and they felt ok... but not 100% perfect. i then bled them normaly.. and the pedal dies.. dead... no pressure then i relized their was air bubbles coming from the MC, as if u put a straw in it, and then blew bubbles, every time the pedal was pressed. (bubbles never end) i cant bled the system out, i dont know what the problem is.. i tryed bleeding them out for an hour.. nothing, the MC makes FOAM! mad Air!.. i have never seen anything like it.. any ideas? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode