stripped block..help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Birdman12 · 05-30-2007, 08:49 PM

so after putting in the T28 which is NOT i repeat NOT a direct fit from the T25, with everything back in after the first start up it starts squirting out oil. so i check and its leaking between the block and oil line fitting from the turbo... turns out the threads in the block are stripped! im very frustrated right now, ive tried using some teflon tape to seal it up, i tried more washers, still nothing.
can someone help me please, some suggestions on what to do and if anyone else has had this problem let me know what you did to fix it. and yes i know most people will just say re tapp it, so thanks but that will be my last resort. please help.

rican_nick · 05-30-2007, 09:13 PM

This just happened to a buddy of mine. He ultimately had to put a helicoil in the block..and all is well.

here are 2 other threads of people with the same problems, i am sure there are others that can be found..

http://www.zilvia.net/f/showthread.p...stripped+block
http://www.zilvia.net/f/showthread.p...stripped+block

nassin31spr · 05-31-2007, 05:13 AM

The size is M12x1.25. Drill bit size is 31/64. Just drill, tap, put in the coil and your back to new. But practice makes perfect so at least try it a couple of times on something else first. You can buy a helicoil kit from your local hardware store, auto store or even eBay. If you need any help along the way just post up your questions and someone will speak up. Good luck.

Rockogtr · 05-31-2007, 05:26 AM

i did the same thing but with the coolant port...sucked but i tapped it and no more leak ...what are you using for a turbo??? i did the 2871r w/ the .86 a/r and like you said bull shit thats a direct replacement

benefitx · 05-31-2007, 08:56 AM

i did the same thing with the coolant hard line...i just put RTV/threadlocker on it though...

05-30-2007, 08:49 PM	#1
Birdman12 Join Date: Dec 2006 Location: Ottawa, Ontario, Canada Age: 36 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	stripped block..help! so after putting in the T28 which is NOT i repeat NOT a direct fit from the T25, with everything back in after the first start up it starts squirting out oil. so i check and its leaking between the block and oil line fitting from the turbo... turns out the threads in the block are stripped! im very frustrated right now, ive tried using some teflon tape to seal it up, i tried more washers, still nothing. can someone help me please, some suggestions on what to do and if anyone else has had this problem let me know what you did to fix it. and yes i know most people will just say re tapp it, so thanks but that will be my last resort. please help.

05-30-2007, 09:13 PM	#2
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 42 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	This just happened to a buddy of mine. He ultimately had to put a helicoil in the block..and all is well. here are 2 other threads of people with the same problems, i am sure there are others that can be found.. http://www.zilvia.net/f/showthread.p...stripped+block http://www.zilvia.net/f/showthread.p...stripped+block __________________ Nick O. 97 240sx My Seller's Review Thread

05-31-2007, 05:13 AM	#3
nassin31spr Zilvia Junkie Join Date: Jan 2007 Location: clay town NC Age: 45 Posts: 437 Trader Rating: (7) Feedback Score: 7 reviews	The size is M12x1.25. Drill bit size is 31/64. Just drill, tap, put in the coil and your back to new. But practice makes perfect so at least try it a couple of times on something else first. You can buy a helicoil kit from your local hardware store, auto store or even eBay. If you need any help along the way just post up your questions and someone will speak up. Good luck. __________________ *"Home is where the armor is"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2007, 05:26 AM	#4
Rockogtr Zilvia Member Join Date: Feb 2006 Location: mass Age: 39 Posts: 182 Trader Rating: (1) Feedback Score: 1 reviews	i did the same thing but with the coolant port...sucked but i tapped it and no more leak ...what are you using for a turbo??? i did the 2871r w/ the .86 a/r and like you said bull shit thats a direct replacement

05-31-2007, 08:56 AM	#5
benefitx Banned from the Marketplace Join Date: Oct 2006 Location: suwanee ga Posts: 670 Trader Rating: (0) Feedback Score: 0 reviews	i did the same thing with the coolant hard line...i just put RTV/threadlocker on it though...